new unused 230 volt motor for myford series 7 lathe

New & Unused 230 volt motor for MYFORD Series 7 lathe

I have for sale a new 230 volt, 550 watts (3/4 h.p.) rpm resiliently-mounted motor bought (in error) for my lathe rebuild. See photos. Complete with capacitor & shaft key. The shaft (still with its protective blue coating) is mm) x 2" (50 mm). Runs almost silently. Price includes carriage to all except remote areas, for which I can quote the extra price on receipt of your postcode. I also want a sound 230-volt Myford compatible coolant pump priced at around £50. Read More

SAVE £50. New 230 volt motor for MYFORD Series 7 lathe.

I have for sale a new 230 volt, 550 watts (3/4 h.p.) rpm resiliently-mounted motor bought (in error) for my lathe rebuild. See photos. Complete with capacitor & shaft key. The shaft (still with its protective blue coating) is mm) x 2" (50 mm). Runs almost silently. My price includes carriage to all except remote areas, for which I can quote the extra price on receipt of your postcode.. I need a similar 3-phase motor for my lathe, which has an inverter drive, and would consider a part-exchange on the above or a direct swap if your motor 3-phase motor is in new condition.. I also need a sound 230-volt Myford compatible coolant pump with a stem length of 180 mm. priced at around £50. Read More

SAVE £50. New 230 volt motor for MYFORD Series 7 lathe.

I have for sale a new 230 volt, 550 watts (3/4 h.p.) rpm resiliently-mounted motor bought (in error) for my lathe rebuild. See photos. Complete with capacitor & shaft key. The shaft (still with its protective blue coating) is mm) x 2" (50 mm). Runs almost silently. My price includes carriage to all except remote areas, for which I can quote the extra price on receipt of your postcode.. I also want a sound 230-volt Myford compatible coolant pump with a stem length of 180 mm. priced at around £50. Read More

SAVE £50. New 230 volt motor for MYFORD Super 7 lathe.

I have for sale a new 230 volt, 550 watts (3/4 h.p.) rpm resiliently-mounted motor bought (in error) for my lathe rebuild. See photos. Complete with capacitor & shaft key. The shaft (still with its protective blue coating) is mm) x 2" (50 mm). Runs almost silently on test. My price includes carriage to all except remote areas, for which I can quote the extra price on receipt of your postcode.. I need a similar 3-phase motor for my lathe, which has an inverter drive, and would consider a part-exchange on the above or a direct swap if your motor 3-phase motor is in new condition.. I also need a sound 230-volt Myford compatible coolant pump with a stem length of 180 mm. priced at around £50. Read More

WANTED, 3-PHASE MOTOR for MYFORD series 7 lathe.

I am looking for a 3-phase resiliently-mounted motor to suit my Myford Super 7. Must be dual voltage -phase 3/4 to 1-h.p. motor in good working condition. I have an excellent single phase (230 volt) Motor 550 watts (2/3 h.p.) to suit a Myford lathe. See photos. Made by EMAC of Scotland. Complete with capacitor & shaft key. Good clean condition, tests OK. With good resilient mounting rings to fit your existing motor cradle. I will sell it for £70 or consider a comparable part-exchange. Read More

WANTED, 3-PHASE MOTOR TO SUIT MYFORD SERIES 7 LATHE.

I have an excellent single phase (230 volt) Motor 550 watts (2/3 h.p.). Removed from Myford Super 7 lathe. See photos. Made by EMAC of Scotland. Complete with capacitor & shaft key. Good clean condition, tests OK. With good resilient mounting rings to fit your existing motor cradle. I will sell it for £70 or may part-exchange it for a comparable 3-phase resiliently-mounted motor. Must be dual voltage -phase 3/4 to 1-h.p. motor in good working condition. Read More

CHEAP MYFORD SERIES 7 LATHE SPARES.

Picture 1) A square control panel to smarten up your industrial cabinet, perhaps for imminent sale. Mint condition, £15.. Picture 2) One of several "Santon" reversing switches as fitted to the vast majority of early Series 7 & 10 lathes. Unlike the similar Dewhurst switch, you don't need the expensive mounting bracket, (about £35). Suitable for 1-phase (240 volts) and 3-phase (440 volts), price is £25. For an extra £5, there is a versatile enclosure (red) that can be easily fitted to your lathe cabinet (inside or out) or to any convenient flat surface... Picture 3) This shows the Santon switch outside its adaptable enclosure.. Picture 4) A NEW PAIR of Tufnol tumbler gears for ML7R & Super 7 lathes, Myford ref A teeth) & A teeth). If you strip your existing Tufnol gears you will have no drive to your gearbox and leadscrew until you can get replacements. Myford price for the 28 T is £, and their 30T gear is out of stock. My price for both is £ post free.. Picture 5). Two switched fuseboxes, suitable for three- or single-phase isolation. Three-phase, containing 3 rewirable fuses, £15, and single-phase with one fuse, £10.. Picture 6) Internal views of the above isolators. Please collect if possible. Tell me what you want & I will give you a firm price. Carriage cost will be kept to a minimum, (usually under £5), depending on your postcode and parcel weight. Read More

REDUCED!MYFORD SERIES 7 LATHE SPARES.

Picture 1) A square control panel to smarten up your industrial cabinet, perhaps for imminent sale. Mint condition, £15.. Picture 2) One of several "Santon" reversing switches as fitted to the vast majority of early Series 7 & 10 lathes. Unlike the similar Dewhurst switch, you don't need the expensive mounting bracket, (about £35). Suitable for 1-phase (240 volts) and 3-phase (440 volts), price is £25. For an extra £5, there is a versatile enclosure (red) that can be easily fitted to your lathe cabinet (inside or out) or to any convenient flat surface... Picture 3) This shows the Santon switch outside its adaptable enclosure.. Picture 4) A new pair of Tufnol tumbler gears for ML7R & Super 7 lathes, Myford ref A teeth) & A teeth), price £30.. Picture 5). Two switched fuseboxes, suitable for three- or single-phase isolation. Three-phase, containing 3 rewirable fuses, £15, and single-phase with one fuse, £10.. Picture 6) Internal views of the above isolators. Please collect if possible. Tell me what you want & I will give you a firm price for carriage.Costs will be kept to a minimum, (usually under £5), but depending on your postcode and parcel weight. Read More

LOOK AT THIS ! MYFORD SERIES 7 LATHE SPARES.

Picture 1) A square control panel to smarten up your industrial cabinet, perhaps for imminent sale. Mint condition. £22.. Picture 2) One of several "Santon" reversing switches as fitted to the vast majority of early Series 7 & 10 lathes. Unlike the similar Dewhurst switch, you don't need the expensive mounting bracket, (about £35).. The 1-phase switch (240 volts) is £30, and the 3-phase (440 volts) is £35. For an extra £5, there is a versatile enclosure (red) that can be easily fitted to your lathe cabinet (inside or out) or to any convenient flat surface... Picture 3) This shows the Santon switch outside its adaptable enclosure.. Picture 4) A new pair of Tufnol tumbler gears for ML7R & Super 7 lathes, Myford ref A teeth) & A teeth). £30 post free.. Picture 5). Two switched fuseboxes, suitable for three- or single-phase isolation. Three-phase, containing 3 rewirable fuses, £17, and single-phase with one fuse, £12.. Picture 6) Internal views of the above isolators.. Picture 7) Two types of emergency lock-off stop buttons. State your preference. £ 10 each.. Please collect if possible. Carriage costs will be kept to a minimum, depending on your postcode and parcel weight. Tell me what you want & I will give you a firm price. Read More

LOOK AT THIS ! MYFORD SERIES 7 LATHE SPARES.

Picture 1) A square control panel to smarten up your industrial cabinet, perhaps for imminent sale. Mint condition. £22.. Picture 2) One of several "Santon" reversing switches as fitted to the vast majority of early Series 7 & 10 lathes. Unlike the similar Dewhurst switch, you don't need the expensive mounting bracket, (about £35).. The 1-phase switch (240 volts) is £30, and the 3-phase (440 volts) is £35. For an extra £5, there is a versatile enclosure (red) that can be easily fitted to your lathe cabinet (inside or out) or to any convenient flat surface... Picture 3) This shows the Santon switch outside its adaptable enclosure.. Picture 4) A new pair of Tufnol tumbler gears for ML7R & Super 7 lathes, Myford ref A teeth) & A teeth). £30 post free.. Picture 5). Two switched fuseboxes, suitable for three- or single-phase isolation. Three-phase, containing 3 rewirable fuses, £17, and single-phase with one fuse, £12.. Picture 6) Internal views of the above isolators.. Picture 7) Two types of emergency lock-off stop buttons. State your preference. £ 10 each. SOLD SOLD SOLD.. Please collect if possible. Carriage costs will be kept to a minimum, depending on your postcode and parcel weight. Tell me what you want & I will give you a firm price. Read More

WANTED, 3-phase motor, or exchange for my 230 volt motor.

If you have a 3-phase motor to suit a Myford Series 7 lathe & want to sell it or swap it for a single-phase one, read on. It will ideally be resiliently-mounted, & similar in outward appearance to my photos. It MUST be dual voltage -phase, 3/4 to 1-h.p., in good working condition & of good appearance. Please supply photos & shaft details.. I also want a sound 230-volt Myford compatible coolant pump priced at around £50.. I have for sale (or exchange) a new 230 volt, 550 watts (3/4 h.p.) rpm motor bought (in error) for my Super 7 rebuild. See photos. Complete with capacitor & shaft key. The shaft (still with its protective blue coating) is mm) x 2" (50 mm). Tests OK. Price £175. If your motor is sound but scruffy, we can perhaps negotiate a deal. The buyer must collect or pay carriage, estimated as £12, but I can quote a fixed price on receipt of your postcode. Read More

WANTED, 3-phase motor, or part-ex for my 230 volt motor.

I am looking for a 3-phase resiliently-mounted motor to suit my Myford Super 7. MUST be dual voltage -phase 3/4 to 1-h.p. motor in good working condition. I have an excellent 230 volt, 550 watts (2/3 h.p.) motor to suit a Myford lathe. See photos. Made by EMAC of Scotland. Complete with capacitor & shaft key. Good clean condition, tests OK. With good resilient mounting rings to fit your existing motor cradle. I will sell it for £70 or consider part-exchange. I also have a 1/4h.p. 230 volt motor to suit an ML10 or ML7 lathe at £40. Buyer to collect or pay carriage. Read More

ELECTRIC MOTOR TO SUIT MYFORD LATHE

Single phase (230 volt) Motor 550 watts (2/3 h.p.). Removed from my Myford Super 7 lathe when converting to 3-phase system. Made by EMAC of Scotland. Complete with capacitor and shaft key. Good clean condition, tests OK. With good resilient (rubber) mounting rings to fit your existing motor cradle. Postage £10 or collect from close to M6 Jn 27. Read More

ELECTRIC MOTOR TO SUIT MYFORD OR SIMILAR LATHE.

Single phase (230 volt) Motor 550 watts (2/3 h.p.). Removed from my Myford Super 7 lathe when converting to 3-phase system. Made by EMAC of Scotland. Complete with capacitor & shaft key. Good clean condition, tests OK. With good resilient mounting rings to fit your existing motor cradle. Post free or collect from close to M6 Jn 27 and save £5.. Possible £25 part-ex for similar -phase 1-h.p. motor in good condition (callers only). Read More

ELECTRIC MOTOR TO SUIT MYFORD OR SIMILAR LATHE.

Single phase (230 volt) Motor 550 watts (2/3 h.p.). Removed from my Myford Super 7 lathe when converting to 3-phase system. Made by EMAC of Scotland. Complete with capacitor & shaft key. Good clean condition, tests OK. With good resilient mounting rings to fit your existing motor cradle. Post free or collect from close to M6 Jn 27 and save £5.. Possible £25 part-ex for similar -phase motor in good condition (callers only). Read More

Myford 7 Lathe

Light use only. Box of quick changers, vertical slide, oiler and other bits Very good condition for age. Ad ID:

Myford Super 7 lathe

Myford Super 7 lathe. 240 volt, runs but not used for a few years, faceplate, chuck a d some turning tools included. Collection only. Read More

MYFORD SUPER 7 CENTRE LATHE

We have For Sale a MYFORD SUPER 7 CENTRE LATHE Complete with 3 JAW 4 JAW FACE PLATE AND NUMEROUS ACCESSORIES. COLLECTION ONLY PLEASE. Read More

MYFORD SUPER 7 CENTRE LATHE

We have For Sale a MYFORD SUPER 7 CENTRE LATHE Complete with 3 JAW 4 JAW FACE PLATE AND NUMEROUS ACCESSORIES. COLLECTION ONLY PLEASE. The Lathe separates from the base and the measurements are BASE inches wide, x 34.5 inches high x 15.5 inches deep. The LATHE itself measures 44 inches wide, 22 inches high x 18 inches deep. Read More

wanted grayson lathe or myford 7

hi im after any grayson lathe parts or a grayson lathe that can be a donar lathe or myford 7 parts,must be cheepish and im willing to arrange a courier if too far for me to travel thanks Read More

Lathe: Myford / Drummond with Myford stand...

Lathe: Myford / Drummond with Myford stand, Pre ML7 Myford lathe with selection of change wheels, 3 jaw and 4 jaw chucks, face plate and other attachments.On Myford stand, itself alone worth £350.A good solid machine, ideal for serious engineers and previously owned by a respected craftsman.Currently in storage and needs a new home soon as the space is required. Showing a little surface rust that doesn't affect the integrity and quality of the machine.Please give me a call or an email to arrange a viewing.Advertised on other sites. Serious offers considered. £, Bournemouth,.

New Belkin Anywhere. 300 watt. Converts 12 volt to 230 volt.

Brand New. still in original box. BELKIN Anywhere. 300 Watt. Converts 12 Volts to 230 Volts. To buy in shops now, costs approx. £

MYFORD SUPER-7 Lathe, quick change gearbox, single...

MYFORD SUPER-7 Lathe, quick change gearbox, single phase 13amp, very little use. As new condition. £ Robertsbridge

Myford ml7 lathe + Myford stand...

Myford ml7 lathe + Myford stand, Myford ml7 lathe + Myford stand comes with forward and reverse switch + oiler lathe in good condition and working order. £, Brighton, .

THREE Chucks Suitable for Myford Series 7 Lathes.

I have for sale three chucks, (two British and one foreign) for sale, all in good clean condition, as follows:. 1) 5" Pratt-Burnerd 4-jaw chuck with Myford backplate, No key. £" Crown 4-jaw chuck with Myford backplate and key. £" Indian make 3-jaw chuck unused, with all six jaws and key, but no backplate. £45.. I also have several smaller chucks. Please ask if interested.. Pictures are shown for each chuck in the above order. If you cannot collect in person I will give you an exact carriage price, and my promise to keep this to the bare minimum. Read More

Contact

• Next →