vintage armstrong 521 stereo amp for disctape in newbury

Vintage Armstrong 521 Stereo Amp for disc/tape in Newbury

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the late 60's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. £75 ono. Carefully packed and posts for £ by courier to UK, insured and signed for.

Vintage Armstrong 521 Stereo Amp for disc/tape in Newbury

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the late 60's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. Posts by courier to UK. £100 ono.

Vintage Armstrong 521 Stereo Amp for disc/tape in Newbury

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the late 60's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. £90 ono. Carefully packed and posts for £ by courier to UK, insured and signed for.

Vintage Armstrong 521 Stereo Amp for disc/tape

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the late 60's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. Posts by courier to UK. Read More

Vintage Armstrong 521 Stereo Amplifier for disc/tape/MP3/CD*

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the late 60's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. £75 ono. Carefully packed and posts for £ by courier to UK, insured and signed for. * Note that MP3 players will need a 3.5 mm stereo jack to male phono plugs cable to connect the earphone output to the amplifier 'tape' inputs, and a low volume setting from the MP3 player. Modern CD players with 2V level 'line' outputs will need a resistive attenuator to drop the level from 2V to 0.4V (or less), so a divide by 5 (-14db) or divide by db) in-line device will be required between the CD player line out and the amplifier 'tape' inputs. Specifications: Output power (RMS): 2 x 20 W into 4 to 8 Ohms, 2 x 15 W into 15 Ohms Frequency response: 22 Hz to 20 kHz (-1 db) Distortion: Less than 0.5 % at 2 x 15 W output Inputs: 2 x 3.5 mV / 60 mV (switch selectable magnetic/ceramic cartridge), 2 x 0.4 V (tape), 2 x 0.1 V (radio), both at 100 k Ohm input impedance Noise level (RMS): -55 db (magnetic cartridge), -60 db (radio), -70 db (tape) Line output: 2 x 0.4 V (via adjustable tone controls) Headphone out: 1 x 6.3 mm stereo (low impedance, mutes main speaker outputs) Rotary controls: Volume, balance, treble, bass Push button controls: Power on/off, rumble filter (-5 db at 30Hz), treble cut 1 (-3 db at 6.5 kHz & -25 db at 10 kHz), treble cut 2 (-3 db at 4.5 kHz & -40 db at 9.0 kHz), loudness (-20 db at 1 kHz produces +10 db at 70 Hz & +5db at 10 kHz), tape input, tape output, radio input, magnetic cartridge input, ceramic cartridge input Power supply: , Vac (selectable), Hz, transformer isolated, internal linear voltage regulated, ~ 20 W (idling) ~ 70 W (max) Cooling: Passive - air cooled Dimensions: 29.5 cm (W) x 29.0 cm (D) x 12.5 cm (H) Weight: 5.5 kg

Vintage Armstrong 521 Stereo Amplifier for disc/tape/MP3/CD*

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the late 60's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. £75 ono. Carefully packed and posts for £ by courier to UK, insured and signed for. * Note that MP3 players will need a 3.5 mm stereo jack to male phono plugs cable to connect the earphone output to the amplifier 'tape' inputs, and a low volume setting from the MP3 player. Modern CD players with 2V level 'line' outputs will need a resistive attenuator to drop the level from 2V to 0.4V (or less), so a divide by 5 (-14db) or divide by db) in-line device will be required between the CD player line out and the amplifier 'tape' inputs. Specifications: Output power (RMS): 2 x 20 W into 4 to 8 Ohms, 2 x 15 W into 15 Ohms Frequency response: 22 Hz to 20 kHz (-1 db) Distortion: Less than 0.5 % at 2 x 15 W output Inputs: 2 x 3.5 mV / 60 mV (switch selectable magnetic/ceramic cartridge), 2 x 0.4 V (tape), 2 x 0.1 V (radio), both at 100 k Ohm input impedance Noise level (RMS): -55 db (magnetic cartridge), -60 db (radio), -70 db (tape) Line output: 2 x 0.4 V (via adjustable tone controls) Headphone out: 1 x 6.3 mm stereo (low impedance, mutes main speaker outputs) Rotary controls: Volume, balance, treble, bass Push button controls: Power on/off, rumble filter (-5 db at 30Hz), treble cut 1 (-3 db at 6.5 kHz & -25 db at 10 kHz), treble cut 2 (-3 db at 4.5 kHz & -40 db at 9.0 kHz), loudness (-20 db at 1 kHz produces +10 db at 70 Hz & +5db at 10 kHz), tape input, tape output, radio input, magnetic cartridge input, ceramic cartridge input Power supply: , Vac (selectable), Hz, transformer isolated, internal linear voltage regulated, ~ 20 W (idling) ~ 70 W (max) Cooling: Passive - air cooled

Armstrong 521 Stereo Amplifier for disc/tape/MP3/CD* in

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the 70's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. £75 ono. Carefully packed and posts for £7.99 by courier to UK, insured and signed for. * Note that MP3 players will need a 3.5 mm stereo jack to male phono plugs cable to connect the earphone output to the amplifier 'radio' inputs, and a low volume setting from the MP3 player. Modern CD players with 2V level 'line' outputs will need a resistive attenuator to drop the level from 2V to 0.4V (or less), so a divide by 5 (-14db) or divide by db) in-line device will be required between the CD player line out and the amplifier 'tape' inputs. If the CD player has a headphone output (3.5 mm jack plug), then the same connection method as stated above for an MP3 player, can be used. Specifications: Output power (RMS): 2 x 20 W into 4 to 8 Ohms, 2 x 15 W into 15 Ohms Frequency response: 22 Hz to 20 kHz (-1 db) Distortion: Less than 0.5 % at 2 x 15 W output Inputs: 2 x 3.5 mV / 60 mV (switch selectable magnetic/ceramic cartridge), 2 x 0.4 V (tape), 2 x 0.1 V (radio), both at 100 k Ohm input impedance Noise level (RMS): -55 db (magnetic cartridge), -60 db (radio), -70 db (tape) Line output: 2 x 0.4 V (via adjustable tone controls) Headphone out: 1 x 6.3 mm stereo (low impedance, mutes main speaker outputs) Rotary controls: Volume, balance, treble, bass Push button controls: Power on/off, rumble filter (-5 db at 30Hz), treble cut 1 (-3 db at 6.5 kHz & -25 db at 10 kHz), treble cut 2 (-3 db at 4.5 kHz & -40 db at 9.0 kHz), loudness (-20 db at 1kHz produces +10 db at 70 Hz & +5db at 10 kHz), tape input, tape output, radio input, magnetic cartridge input, ceramic cartridge input Power supply: , Vac (selectable), Hz, transformer isolated, internal linear voltage regulated, ~ 20 W (idling) ~ 70 W (max) Cooling: Passive - air cooled Dimensions: 29.5 cm (W) x 29.0 cm (D) x 12.5 cm (H) Weight: 5.5 kg

Armstrong 521 Stereo Amplifier for disc/tape/MP3/CD*

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the 70's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. Posts by courier to UK. * Note that MP3 players will need a 3.5 mm stereo jack to male phono plugs cable to connect the earphone output to the amplifier 'radio' inputs, and a low volume setting from the MP3 player. Modern CD players with 2V level 'line' outputs will need a resistive attenuator to drop the level from 2V to 0.4V (or less), so a divide by 5 (-14db) or divide by db) in-line device will be required between the CD player line out and the amplifier 'tape' inputs. If the CD player has a headphone output (3.5 mm jack plug), then the same connection method as stated above for an MP3 player, can be used. Specifications: Output power (RMS): 2 x 20 W into 4 to 8 Ohms, 2 x 15 W into 15 Ohms Frequency response: 22 Hz to 20 kHz (-1 db) Distortion: Less than 0.5 % at 2 x 15 W output Inputs: 2 x 3.5 mV / 60 mV (switch selectable magnetic/ceramic cartridge), 2 x 0.4 V (tape), 2 x 0.1 V (radio), both at 100k Ohm input impedance Noise level (RMS): -55 db (magnetic cartridge), -60 db (radio), -70 db (tape) Line output: 2 x 0.4 V (via adjustable tone controls) Headphone out: 1 x 6.3 mm stereo (low impedance, mutes main speaker outputs) Rotary controls: Volume, balance, treble, bass Push button controls: Power on/off, rumble filter (-5 db at 30Hz), treble cut 1 (-3 db at 6.5 kHz & -25 db at 10 kHz), treble cut 2 (-3 db at 4.5 kHz & -40 db at 9.0 kHz), loudness (-20 db at 1kHz produces +10 db at 70 Hz & +5db at 10 kHz), tape input, tape output, radio input, magnetic cartridge input, ceramic cartridge input Power supply: , Vac (selectable), Hz, transformer isolated, internal linear voltage regulated, ~ 20 W (idling) ~ 70 W (max) Cooling: Passive - air cooled Dimensions: 29.5 cm (W) x 29.0 cm (D) x 12.5 cm (H) Weight: 5.5 kg Read More

Armstrong 521 Stereo Amplifier

Armstrong 521 Stereo Amplifier 2 x 25 watts output at 0.5% harmonic distortion. Outputs for Tape Recording and headphones Inputs for tape, radio, ceramic cartridge & magnetic cartridge. Good condition Read more

Vintage AKAI GXC-38D Stereo Cassette Deck in Newbury

Nice example of this highly acclaimed Akai stereo cassette deck. Has the famous hard wearing glass-ferrite head and Dolby noise reduction system. Cleaned inside and out with all functions including recording checked and working as they should after long period of storage. New capstan drive belt fitted. Walnut case is in good condition. Collectors item. £ ono. Carefully packed and posts for £ by courier to UK, insured and signed for.

Vintage AKAI GXC-38D Stereo Cassette Deck in Newbury

Nice example of this highly acclaimed Akai stereo cassette deck. Has the famous hard wearing glass-ferrite head and Dolby noise reduction system. Cleaned inside and out with all functions including recording checked and working as they should after long period of storage. New capstan drive belt fitted. Walnut case is in good condition. Collectors item. £ ono. Carefully packed and posts for £ by courier to UK, insured and signed for. Specifications: Tape Speed: 4.76 cm/s (1 78 inch/s) Wow/Flutter: Less than 0.12 % (RMS) Frequency Response: 30 to Hz (-1db) using chromium dioxide (CrO2) tape Distortion: Less than 2% (At 1 KHz & '0' VU level) Dolby noise reduction: Switch selectable Signal/Noise ratio: 58db with Dolby Recording level compression: Switch selectable Microphone input: 2 x 0.5 mV into 4.7 k Line input: 2 x 70 mV into 200 k Line output: 2 x 0.78 V from db into >20 k) 5 pin DIN line in/out: 2 x 30 mV or 3 mV in (switch selectable) / 2 x 0.5 V out Headphone out: 2 x 30 mV into 8 Tape Index counter: 3 digit Dimensions: 40.9 cm (W) x 11.2 cm (H) x 22.1 cm (D) Weight: 5.5 kg (12 lbs)

Vintage AKAI GXC-38D Stereo Cassette Deck in Newbury

Nice example of this highly acclaimed Akai stereo cassette deck. Has the famous hard wearing glass-ferrite head and Dolby noise reduction system. Cleaned inside and out with all functions including recording checked and working as they should after long period of storage. New capstan drive belt fitted. Walnut case is in good condition. Collectors item. Posts by courier to UK. £ ono.

Marshall twin stereo chorus Vintage amp.

One owner from new. Never been gigged. Lovely condition and great sound. Dual Chanel set up with foot switch to switch between two set ups. Great chorus and reverb. Simply a fab sounding amp. Ad ID:

AKAI GXC-38D Stereo Cassette Deck in Newbury

Nice example of this highly acclaimed Akai stereo cassette deck. Has the famous hard wearing glass-ferrite head and Dolby noise reduction system. Cleaned inside and out with all functions including recording checked and working as they should after long period of storage. New capstan drive belt fitted. Walnut case is in good condition. Collectors item. £ ono. Carefully packed and posts for £7.99 by courier to UK, insured and signed for. Specifications: Tape Speed: 4.76 cm/s (1 7/8 inch/s) Wow/Flutter: Less than 0.12 % (RMS) Frequency Response: 30 to Hz (-1db) using chromium dioxide (CrO2) tape Distortion: Less than 2% (At 1 KHz & '0' VU level) Dolby noise reduction: Switch selectable Signal/Noise ratio: 58db with Dolby Recording level compression: Switch selectable Microphone input: 2 x 0.5 mV into 4.7 k Ohm Line input: 2 x 70 mV into 200 k Ohm Line output: 2 x 0.78 V from 100 Ohm (0 db into >20 k) 5 pin DIN line in/out: 2 x 30 mV or 3 mV in (switch selectable) / 2 x 0.5 V out Headphone out: 2 x 30 mV into 8 Ohm Tape Index counter: 3 digit Dimensions: 40.9 cm (W) x 11.2 cm (H) x 22.1 cm (D) Weight: 5.5 kg (12 lbs)

KC-300 STEREO MIXING KEYBOARD AMPLIFIER 100w in Newbury

KC-300 STEREO MIXING KEYBOARD AMPLIFIER Excellent condition, hardly used RATED POWER OUTPUT: Speaker Out: 100 W / 8 ohm NOMINAL INPUT LEVEL (1 kHz): Channel 1 MIC: -50 dBm Channel 1 LINE: -20 dBm Channel dBm STEREO LINK IN: 0 dBm NOMINAL OUTPUT LEVEL (1 kHz): STEREO LINK OUT: 0 dBm LINE OUT: + 4 dBm 0 dBm = Vrms SPEAKERS: 30 cm (12 inches) x 1 + Horn Driver x 1 CONTROLS: Channel 1 Volume Knob (MIC / LINE) Channel 2 Volume Knob (STEREO) Channel 3 Volume Knob (STEREO) Channel 4 Volume Knob (MONITOR) Line Out LEVEL Knob LOW Knob HIGH Knob VOLUME Knob POWER Switch CONNECTORS: Channel 1 MIC Input Jack 1 / 4 inch T / R / S phone type balanced Channel 1 LINE Input Jack Channel 3 Input Jacks (L / MONO, R) Channel 4 Input Jack (MONITOR) LINE OUT Jacks (1 / 4 inch T / R / S phone type balanced MONO, L, R) STEREO LINK OUT Jack STEREO LINK IN Jack PHONES Out Jack POWER SUPPLY: 230 V - 240 V POWER CONSUMPTION: 80W DIMENSIONS: 482 (W) x 350 (D) x 477 (H) mm 19 (W) x (D) x (H) inches WEIGHT: 17.5 kg / 38 lbs 10 oz Available from Newbury RG20 8RY or Cornwall PL32 9UF. COLLECTION ONLY

Vintage JVC A-X2 Stereo integrated amp with graphic equalize

JVC A-X's Integrated Amplifier with integral Graphic Equaliser This is a really nice amplifier in very clean condition Read More

Vintage JVC A-X2 Stereo integrated amp with graphic equalize

JVC A-X's Integrated Amplifier with integral Graphic Equaliser This is a really nice amplifier in very clean condition Read More

English for Marketing &a

ISBN: , SKU: , AUTHOR: Sylee Gore, PUBLISHER: Oxford University Press, NA Buy Now

Vintage Technics Stereo: RS-4 Tape Deck, SU-4 Amp, ST4-L Tun

Vintage Technics stereo system, purchased originally as separates in and looked after carefully since then! In good condition considering their age. I recently had a new belt fitted to the turntable and a new volume slider as the old one kept sticking. The only issue is that the stylus tracking function is a bit temperamental (stylus plays records fine, but the skip function is a bit sticky). If you don't want to skip tracks you're fine! Anyone a bit techie could probably sort it). Recently tested. The components are: SL-J1 Belt Drive Fully Automatic Turntable System SU-4 Stereo Integrated Amplifier ST-4L FM/AM/LW Stereo Tuner  RS-4 Tape Deck  Cambridge Audio S20 Bookshelf Speakers (w power range) All come complete with original Operating Instructions. All connecting leads included. The speakers are not the original Technics speakers as I replaced them in . From a pet and smoke free home. Collection only. Read more

Fender Princeton Stereo Chorus Amp in Hockley

Fender Princeton Stereo Chorus Amp In need of some TLC. Fully working but in need of some Pots changing. Sounds wonderful but been neglected. Hence £ Delivery: AnyVan offer instant quotes on collection and delivery – you can book online

Peavey XRD 680 Powered stereo mixer amp for sale (inc x2 hig

Peavey XRD 680 Powered stereo mixer amp for sale (inc x2 high quality speakon-speaker cables) Perfect working order, and has been fully serviced a few years ago. Selling as it simply doesn’t get used anymore! See full manuel at the manualslib website. Collection only from SW19 Read More

Samson SX stereo amp - watts in Llandudno Junction

In excellent working order, hardly used, rack mounted, inc manual. PayPal or cash on collection.

Samson SX stereo amp - watts in Llandudno Junction

In excellent working order, hardly used, rack mounted, inc manual.

PIONEER A-400 INTEGRATED STEREO AMP in Waterlooville

This classic stereo amplifier delivers 60 watts/channel into 8 ohms. The simplistic design concentrates on sound quality; there are no tone controls, filters or loudness buttons, just pure quality sound. Inputs for Tuner, CD, Tape1 and 2, Line and Phono, all tested with speakers connected. In excellent condition for age, original box available.

Marshall EL Stereo Valve Power Amp. in Gosport

In good condition. See my other ad for the Marshall JMP-1 if you'd like both units.

Contact

• Next →