pylepro phono pre amplifier pylepro phono pre amplifier

PylePro Phono Pre-amplifier-PylePro Phono Pre-Amplifier

Update your car stereo system with this phono amplifier PylePro phono pre-amplifier includes a 12v DC adaptor Stereo pre-amplifier connects to turntable output to bring phono level up to line level Load impedance: 10k ohms Reference voltage: 1v Input sensitivity/impedance/phono 3 mv/50k ohms T.H.D.: 0.08 for 1 khz 3 mv input Output level: 2v S/N ratio (with a-wtd): 70 db Frequency response: 20 hz - 20 khz/2db Dimensions (whd): 3.54 inches long x 2.13 inches wide x 1.02 inches deep Weight: 0.88 lbs

PylePro Mini 2 x 15-watt Stereo Power Amplifier-PylePro Mini

Crank up the sound on this mini 2X15 W stereo power amplifier Stereo component features 2X15 Watts 10 RMS At 4-Ohm Car amp has power-on LED indicator Master volume control RCA cable L/R input Four push type speaker L/R terminals Compatible with walkman and computerize Devices (MP3) via 3.5mm To RCA converter voltage selector Dimensions: 5.61 inches wide x 2.16 inches high x 4.21 inches deep

PylePro PP444 Amplifier

PylePro PP444 Amplifier - 0.1% THD - 20 Hz to 20 kHz

PylePro PHA40 Signal Amplifier

PylePro PHA40 Signal Amplifier - Audio Line In - Audio Line Out

PyleHome PT Amplifier - 300 W RMS - 2 Channel-PylePro

Control your audio speakers with this power amplifier DJ equipment boasts a peak power of watts Electronic device features two microphone input jacks watts peak power 800 watts at 2 ohms 550 watts at 4 ohms 300 watts at 8 ohms Inputs: RCA (4 audio sources) 1 RCA dedicated for record line output Master volume controls with blue led Heavy duty fan cooling A/B speaker selector Removable rack-mount brackets 110 to 220 volt switchable Amplifier measures 19 inches wide x 12.1 inches long x 5.1 inches hide Weight: 14.3 pounds For state-specific electronic recycling and disposal information,please click here.

PylePro 6.5-inch High Performance Mid-bass Woofer-PylePro

PylePro 6.5-inch high performance mid-bass woofer Audio equipment features 125 watts RMS/250 watts peak power High performance woofer has 1-inch high temperature aluminum voice coil 6.5-inch paper coating cone 25-ounce magnet structure Sensitivity: 92db Frequency response: 70Hz - 9kHz 8 ohm impedance Mounting depth: 2.75 inches Sold as a unit

PylePro 6.5-inch Two-way Enclosed Speaker System-PylePro

Crank up the sound with this 6.5-inch two-way in-wall enclosed speaker system Car audio system features directional tweeter Stereo component features 6.5-inch long throw woofer 1-inch high temperature voice coil 1-inch titanium dome tweeter 360 Watts rated peak power Frequency response: 65Hz - 22 KHz 4-8 Ohm impedance Vented design for high power and deep bass response Cut-out dimensions: 8.24 inches wide x inches high x 3.68 inches deep Sold as one pair

PylePro 15ft. Mic Cable 1/4'' Male to XLR Female-PylePro

15ft. professional microphone cable 1/4'' male to xlr female 15ft. professional microphone cable 1/4'' male to xlr female

PylePro 5.25-inch Dual 2-way In-wall Speaker System-PylePro

PylePro 5.25-inch dual 2-way in-wall center channel speaker system Dual 5.25-inch long throw woofer features a video shield Speakers are vented design for high power and deep base response Center/left/right channel 300 watts rated peak power 1-inch high temperature voice coil 1-inch titanium dome tweeter Electronic crossover network Variable boost (+7-3db) Frequency response 70hz-22khz 8 ohm impedance Overall: 7 2/5 inches high x inches wide x 3 3/5 inches deep Cut-out: 6 2/5 inches high x inches wide x 3 inches deep Including hardware for easy wall mount installation

Record Turntable + Phono Pre-Amp

Technics Direct Drive Automatic Turntable SL-QD33 fitted with EPC P30 cartridge. Overall good condition. Some marks on perspex dust cover. Sold together with B-Tech Phono Pre-Amplifier (BT26). As new condition. Read More

Oppo - HA-1 Headphone Amplifier, DAC and Pre-Amplifier

Customer Collect only! In perfect condition As good as new With box manual and remote Mint Condition Hardly Used rrp. £ The OPPO HA-1 Headphone Amplifier builds upon the success of our BDP-95 and BDP-105 audiophile universal Blu-ray Disc players. The BDP-95 and 105 have been selected as "Recommended Components" by prestigious publications such as Stereophile and The Absolute Sound. Discerning listeners describe the players’ DAC and analogue output stage as very detailed, transparent and engaging. Bench tests indicate the players’ performance approaching the measurable limit of audio analysing instruments. Drawing upon the proven circuit design of these award-winning players, the HA-1 combines an uncompromising Class A balanced power amplifier section with the performance of the ESS Sabre32 Reference DAC. Read More

Oppo - HA-1 Headphone Amplifier, DAC and Pre-Amplifier

Customer Collect only! In perfect condition As good as new With box manual and remote Mint Condition Hardly Used less than a year old rrp. £ see reviews online Read More

Creek OBH 9SE MC Phono Pre-Amp

With OBH 2 PSU. Excellent. Boxed. Read More

Creek OBH 9SE MC Phono Pre-Amp

With OBH 2 PSU. Excellent. Boxed. Read more

NAD PP2i Phono Pre Amp For Sale

NAD PP2i phono pre amplifier for sale. This item is in 'as new' condition, boxed with instructions. Many of today's stereo and AV amplifiers and receivers have either eliminated the phonograph input altogether, or included a low cost—and low performance—circuit for attaching your turntable. The PP 2i offers superb performance in a clean and simple package for a very reasonable cost. The NAD PP 2i is a improved successor to the very popular PP 2, with its new power supply that reduces power consumption to new standards. PP-2i Phono Preamplifier Features Selectable MM and MC Phono Stage External 24 volt Power Supply Close Tolerance High Quality Components LED Power Indicator Read More

McIntosh C712 Pre Amplifier + MC Power Amplifier

McIntosh C712 Pre Amplifier + MC Power Amplifier Superb sounding McIntosh C712 Pre + MC, both fully boxed with remote. Read more

jack male and female xlr leads + some jack to phono phono - phono minjack

Various leads for sale.Selling in bundles of 4 for £6 some xlr insert leads also available and loads of IEC cables with plugs attached [kettle mains leads] 4 for £6 also.Also some powercon mains leads for powered speakers etc. Ad ID: Delivery Service Consumer Credit

MAJORCOM AP120 Mixer Amplifier/ Pre-Amplifier.

30 Day Warranty with this item. Portable Appliance Tested (PAT) & labelled before dispatch AP 120 is a 120W, 100V/70V line or low impedance amplifier-preamplifier. Specifications: • 3 Mic inputs, 2 priority. • 2 AUX inputs. • 1 tone control. • Over current protection. • Bandwidth (Hz) • Dimensions (W x H x D) (mm) 483 x 88 x U • Equalizer +/-12dB BASS / TREBLE • Input 1 to 3 MIC - 3 and 4 AUX • Output impedance 70V/V/83? • Output level / impedance LINE OUT • Power 120W • Power source 240VAC - Hz • Priority MIC 1 > MIC2 MIC3 AUX1 AUX2 • THD • Weight (Kg) 11,5 Read More

PylePro 500-watt 12-inch 2-way Speaker Cabinet-PylePro 500

Make sure your music is heard with this two-way speaker cabinet from PylePro. Featuring a 12-inch woofer,this speaker has a frequency range of 47 Hz to 8 KHz to pick up the lowest bass tones and a maximum power output of 500 watts. Weighing only 31 pounds,this speaker cabinet is surprisingly portable,while delivering a high quality sound and listening experience. This unit also contains a two-way ported enclosure for extra bass response,so you can perfect the sound for your next party. Improve your listening experience with this speaker cabinet Speaker boasts a 12-inch woofer Audio equipment features a rated peak power of 500 watts Frequency range (-10 db): 47 Hz to 8 KHz 2-way ported enclosure for extra bass response 1/4-inch speak-on jacks Power max: 500 watts Power rms: 250 watts Sensitivity: 92db 1w/1m Nominal impedance: 8 ohm Integrated 35mm speaker stand mount Crossover frequency: 3.0 KHz 35 mm speaker stand mount Dimensions: 22.6 inches high x 16.1 inches wide x 12 inches deep Weight: 31 pounds

PylePro 6-foot 2-way Tripod Speaker Stand-PylePro 6 ft.

6 ft. 2-way tripod speaker stand telescopes to six feet black anodized stand reversible tube provides industry standard diameters tube diameter: 35mm/38mm ('') loading capacity: 100 lbs. constructed with strong,lightweight tubing safety pin for maximum strength and security For state-specific electronic recycling and disposal information,please click here.

PylePro 5-inch High Performance Mid-Bass Woofer-PylePro 5''

PylePro 5-inch high performance mid-bass woofer Audio equipment features 100 watts RMS/200 watts peak power High performance woofer 5-inch paper coating cone 1-inch high temperature aluminum voice coil 15-ounce magnet structure Sensitivity: 90db Frequency response: 80Hz - 7kHz 8 ohm impedance Mounting depth: 2 inches Sold as a unit

Pioneer SA-540 Amplifier, FWO, VGC - Phono

Pioneer SA-540 Integrated SS Amplifier in FWO and VGC – Phono Stage Early Eighties vintage, manufactured in Japan to the renowned high build quality of the period. Great sounding amp, very controlled sound with tight bass and clear, precise mids and highs. Rated at 35wpc RMS (8 ohm) though really punches above that and more than capable of driving demanding speakers. All contacts, switches and pots have be cleaned/ de-oxidised. Size in cm: Width: 42, Height: 11, Depth: 24 Happy to demonstrate Read More

YAMAHA AX-396 AMPLIFIER (MM Phono) - VGC

Yamaha AX-396 Hi-Fi amplifier (black). MM Phono, Tape & 4 Line inputs. 2 sets of speaker outputs. Very good condition, can be demonstrated working. Read More

Super Pioneer A300X amplifier with phono input

Excellent amp from the same stable as Pioneer's legendary A400. Phono input, headphone socket, 30 wpc, 0.03 pc thd. Cleaned and serviced for smooth noise free operation. Great sound and versatility. Fifty quid, no offers Specifications Power output: 30 watts per channel into 8? (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.03% Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 83dB (MM), 108dB (line) Output: 150mV (line) Dimensions: 420 x 352 x 126mm Weight: 6.8kg Year: Read more

Jeff Rowland Phonostage phono amplifier suitable for The

Jeff Rowland Phonostage - top condition - only to be used in conjunction with a Jeff Rowland precursor! The phonostage does not have its own power supply. Excellent phono amplifier with fantastic sound and perfect processing.

Contact

• Next →