pioneer sa 540 amplifier fwo vgc phono

Pioneer SA-540 Amplifier, FWO, VGC - Phono

Pioneer SA-540 Integrated SS Amplifier in FWO and VGC – Phono Stage Early Eighties vintage, manufactured in Japan to the renowned high build quality of the period. Great sounding amp, very controlled sound with tight bass and clear, precise mids and highs. Rated at 35wpc RMS (8 ohm) though really punches above that and more than capable of driving demanding speakers. All contacts, switches and pots have be cleaned/ de-oxidised. Size in cm: Width: 42, Height: 11, Depth: 24 Happy to demonstrate Read More

Yamaha DSP-A - Receiver in FWO, VGC, Box – Phono Stage

Yamaha DSP-A - Receiver in FWO, VGC, Box, Manual, Remote – Phono Stage I have been using this audiophile quality heavyweight performer as a 2-Channel music amp for a number of years. These units sold for £ in and used the highest quality components (Nichicon etc.) and engineering know how. At over 20kg the build quality is of the highest standard. These are very musical amps with an abundance of power that can drive the most demanding of speakers. The phono stage is an impressive solid performer. Specifications: Power Output: 80 watts per channel into 8? (stereo) Surround Output: 80W (front), 80W (center), 25W (rear) Frequency Response: 20Hz to 20kHz Total Harmonic Distortion: % Input Sensitivity: 2.5mV (MM), 150mV (line) Signal to Noise Ratio: 96dB (line) Output: 150mV (line) Speaker Load Impedance: 4? to 16? Video Connections: composite, SVHS Dimensions: 435 x 170 x mm Weight: 21kg Accessories: remote control Happy to demonstrate Read More

BeoMaster Tuner/ Amplifier - FWO, VGC - Rare Rosewood

BeoMaster Tuner/ Amplifier - FWO, VGC - in the rare and sought after Rosewood finish (this was the premium finish of the three offered). Classic Jacob Jensen design as exhibited in MoMA. Power output; 2 x 30 W RMS; 2 x 60 W music power Speaker impedance: 4 ohms Distortion: Intermodulation: Bass control range: +/- 17 dB at 50 Hz Treble control range: +/- 14 dB at Hz Tuning range: MHz Dimensions: W x H x D: 58 x 9.5 x 26cm Weight: 8.7 kg Power consumption: W Connections: Phono: 1 DIN Phono: 2 DIN Tape: DIN Headphone socket Speakers: 3 sets Happy to demonstrate

Pioneer PL-12D Turntable in FWO and VGC

Pioneer PL-12D Turntable in FWO and VGC Great sounding and easy to use belt driven turntable. Specifications: Motor: 4-pole synchronous motor Drive: belt driven Speeds: 33 and 45rpm Speed accuracy: 1.0% or less Wow and flutter: 0.1% WRMS Rumble: 47dB Platter: 30cm aluminium alloy Tonearm: s-shaped pipe Effective length: 221mm Dimensions: 430 x x 349mm Weight: 7.5kg Happy to demonstrate

Super Pioneer A300X amplifier with phono input

Excellent amp from the same stable as Pioneer's legendary A400. Phono input, headphone socket, 30 wpc, 0.03 pc thd. Cleaned and serviced for smooth noise free operation. Great sound and versatility. Fifty quid, no offers Specifications Power output: 30 watts per channel into 8? (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.03% Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 83dB (MM), 108dB (line) Output: 150mV (line) Dimensions: 420 x 352 x 126mm Weight: 6.8kg Year: Read more

Pioneer PL-12D Turntable, FWO, VGC, Shure M75ED Type 2

Pioneer PL-12D Turntable in FWO, VGC with Shure M75ED Type 2 cartridge and Shure N75ED-T2 stylus. Great sounding and easy to use belt driven turntable. Plenty of tight controlled bass. Suspension spring damping foam replaced. Specifications: Motor: 4-pole synchronous motor Drive: belt driven Speeds: 33 and 45rpm Speed accuracy: 1.0% or less Wow and flutter: 0.1% WRMS Rumble: 47dB Platter: 30cm aluminium alloy Tonearm: s-shaped pipe Effective length: 221mm Dimensions: 430 x x 349mm Weight: 7.5kg Happy to demonstrate Read More

PIONEER AMPLIFIER SA-WATTS

PIONEER 600 WATT VALVE STEREO AMPLIFIER,,s,BRUSHED STEEL FINISH. GOOD CONDITION £30 ono.  ARUNDEL ... (click to reveal full phone number)

Pioneer A-400 Integrated Amplifier - Built-In PHONO Stage

Highly regraded & sort after amplifier in full working order. Amazing detailed sound. Great soundstage and punchy bass. Built in MM & MC Phono Stage. Voted in at number 5 in the top 50 HiFi Choice's 'HiFi That Rocked the World' list - this is a very capable & engaging amplifier. Power output: 50 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.03% Input sensitivity: 0.2mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 69dB (MC), 87dB (MM), 108dB (line) Output: 150mV (line) Dimensions: 420 x 352 x 126mm Weight: 8kg Refer to the internet for reviews of this sort after amplifier. I can demonstrate driving various demanding speakers.

YAMAHA AX-396 AMPLIFIER (MM Phono) - VGC

Yamaha AX-396 Hi-Fi amplifier (black). MM Phono, Tape & 4 Line inputs. 2 sets of speaker outputs. Very good condition, can be demonstrated working. Read More

Rare PIONEER SA-708 Fluoroscan Amplifier

Classic Rare Vintage PIONEER SA-708 Fluoroscan Amplifier. In very good vintage used working condition. In need of some contact cleaner applied on the knobs Read More

Vintage Pioneer SA 500A stereo integrated Amplifier.

For Sale Vintage Pioneer SA 500A Stereo Integrated Amplifier in nice and clean condition. Fully working order. Has two phono inputs. Any questions are welcome. Read More

PylePro Phono Pre-amplifier-PylePro Phono Pre-Amplifier

Update your car stereo system with this phono amplifier PylePro phono pre-amplifier includes a 12v DC adaptor Stereo pre-amplifier connects to turntable output to bring phono level up to line level Load impedance: 10k ohms Reference voltage: 1v Input sensitivity/impedance/phono 3 mv/50k ohms T.H.D.: 0.08 for 1 khz 3 mv input Output level: 2v S/N ratio (with a-wtd): 70 db Frequency response: 20 hz - 20 khz/2db Dimensions (whd): 3.54 inches long x 2.13 inches wide x 1.02 inches deep Weight: 0.88 lbs

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC Great sounding turntable. Features of the Yamaha YP-211 include a powerful multi-pole synchronous motor, belt drive for low wow and flutter, auto-return and auto-cut features designed for optimum operating convenience and a sensitive S-type static balance tone arm with cueing lever and inside force canceller. Manufactured in (MRP £110 at time), typical Yamaha TT quality of the period. Pure, clean design using quality materials/ components and high engineering standards. Specifications: Motor: 4-pole synchronous motor; Platter: 300mm die-cast aluminium; Speeds: 33 and 45rpm; Drive system: belt drive; Signal to noise ratio: better than 52dB; Wow and flutter: better than 0.08% WRMS; Type: S-type static balance; Effective length: 215mm; Overhang: 15mm; Cartridge weight: 5 to 11g; Dimensions: 435 x 150 x 361mm; Weight: 6kg. Happy to demonstrate. Read More

Philips CD600 Cd Player - TDA DAC - VGC, FWO

Philips CD600 Cd Player - VGC, FWO with TDA DAC Great sounding CDP. The TDA DAC truly lives up to it's cult status amongst digital audiophiles. Refer to the internet for the highly regarded reviews and technical analysis of this unit. Specifications: Disc format: CD Digital converter: TDA CD Mechanism: CDM-4/19 Frequency response: 20Hz to 20kHz Dynamic range: 80dB Signal to Noise Ratio: 90dB Channel separation: 80dB Total harmonic distortion: 0.05% Line output: 2V Dimensions: 420 x 280 x 104mm Weight: 3.8kg Happy to demonstrate Read More

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC Great sounding turntable. Features of the Yamaha YP-211 include a powerful multi-pole synchronous motor, belt drive for low wow and flutter, auto-return and auto-cut features designed for optimum operating convenience and a sensitive S-type static balance tone arm with cueing lever and inside force canceller. Manufactured in (MRP £110 at time), typical Yamaha TT quality of the period. Pure, clean design using quality materials/ components and high engineering standards. Specifications: Motor: 4-pole synchronous motor; Platter: 300mm die-cast aluminium; Speeds: 33 and 45rpm; Drive system: belt drive; Signal to noise ratio: better than 52dB; Wow and flutter: better than 0.08% WRMS; Type: S-type static balance; Effective length: 215mm; Overhang: 15mm; Cartridge weight: 5 to 11g; Dimensions: 435 x 150 x 361mm; Weight: 6kg. Happy to demonstrate.

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC Great sounding turntable. Goldring ELAN cartridge. Features of the Yamaha YP-211 include a powerful multi-pole synchronous motor, belt drive for low wow and flutter, auto-return and auto-cut features designed for optimum operating convenience and a sensitive S-type static balance tone arm with cueing lever and inside force canceller. Manufactured in (MRP £110 at time), typical Yamaha TT quality of the period. Pure, clean design using quality materials/ components and high engineering standards. Specifications: Motor: 4-pole synchronous motor; Platter: 300mm die-cast aluminium; Speeds: 33 and 45rpm; Drive system: belt drive; Signal to noise ratio: better than 52dB; Wow and flutter: better than 0.08% WRMS; Type: S-type static balance; Effective length: 215mm; Overhang: 15mm; Cartridge weight: 5 to 11g; Dimensions: 435 x 150 x 361mm; Weight: 6kg. Happy to demonstrate. Read More

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg Read More

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg

KEF Concord IV Floor Standing Loudspeakers in FWO/ VGC

KEF Concord IV is a free-standing loudspeaker system incorporating many features resulting from KEF’s programme of advanced research and development. Concord IV offers precise and stable stereo reproduction for the serious listener together with ample volume for the most extreme domestic use. A maximum acoustic output of 107dB spl can be obtained on programme peaks. Concord IV Features: High power handling capacity: 100 watts per channel. High acoustic output: 107dB spl on programme peaks. For use with amplifiers of more than 10 watts per channel. Interchangeable grille covers in black, brown, beige, blue, red green or grey to suit your decor. Concord IV Specifications Frequency range: - 60Hz to 20kHz ± 3dB at 2m on reference axis (-10dB at 40Hz and 25kHz); Directional characteristics: - Horizontal: within ± 2dB of axial response up to 10kHz for ± 20º - Vertical: within ± 2dB of axial response up to 20kHz for ± 5º; Maximum output: - 107dB spl on programme peaks under typical listening conditions; Character sensitivity level: - 87dB spl at 1m on measuring axis for pink noise input of 1W; Distortion: - Second harmonic: less than 2% from 20Hz to 80Hz, less than 1% from 80Hz to 20kHz; Third harmonic: less than 1% from 20Hz to 20kHz; Measured at 1m on measuring axis at mean spl of 90dB, anechoic conditions Enclosure type: - Closed box Programme rating: - 100W Maximum continuous sinusoidal input 28V rms from 60Hz to 2kHz reducing 10Vrms from 2.5kHz to 20kHz Minimum amplifier requirement: - 10W Nominal impedance: - 8 ohms Resonance frequency: - 68Hz Total system Q: - 0.8 Dimensions: - 692 x 280 x 315 mm Weight: - 12.7kg (28lb) Internal volume: - 38 litres Concord IV Benefits The addition of quality loudspeakers to an existing rack system or music centre - or even a portable radio - will dramatically improve sound quality. As loudspeaker specialists, KEF concentrate on the design and production of high fidelity loudspeakers, and have employed the latest computer aided analysis techniques to develop Concord IV. With and amplifier output of as little as 10 watts per channel, Concorde IV will produce more than enough volume to fill a generous sized room. With larger amplifiers, considerably louder volume levels can be achieved whilst maintaining realistic tonal quality. Concord IV is a medium-sized (38 litres) loudspeaker system combining a 25mm soft dome tweeter with two 200mm bass units to give extended bass performance down to 40Hz. The two identical bass units are arranged to work together over the lower part of the frequency range ensuring reduced distortion and remarkable power handling capability. To obtain an even distribution of sound a new filter system progressively reduces the output of the lower bass unit above 200Hz. At crossover frequency only one bass unit is operating with the tweeter. To allow the sound to reach the listener directly without troublesome reflections from walls, floor ceiling the drive units are arranged within the enclosure so that the full frequency response is enjoyed when the loudspeakers are positioned between 9” and 12” from the floor. Happy to demonstrate

jack male and female xlr leads + some jack to phono phono - phono minjack

Various leads for sale.Selling in bundles of 4 for £6 some xlr insert leads also available and loads of IEC cables with plugs attached [kettle mains leads] 4 for £6 also.Also some powercon mains leads for powered speakers etc. Ad ID: Delivery Service Consumer Credit

TEAC A-360 High End Stereo Cassette Deck - FWO, VGC

TEAC A-360 High End Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg Read More

TEAC A-360 High End Stereo Cassette Deck - FWO, VGC

TEAC A-360 High End Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg

Bespoke Vintage 2-Way Bookshelf Loudspeakers in VGC and FWO

Bespoke Vintage 2-Way Bookshelf Loudspeakers in VGC and FWO. Great sounding speakers with accurate tight bass in a rigid heavy sealed cabinet. Built locally during the early 70s when speakers were commonly sold in kit/ component form. Vintage Wharfedale drivers and crossover. You can make out the distinctive lilac tweeter widely used by Wharfdale in their speakers of the period. Happy to demonstrate and compare.

Exposure s2 MC phono amplifier(mint). Bargain price

This is Exposures reference top of the line phono stage. Beautiful build quality and an awesome sound. In perfect as new condition with very little use. Grab a piece of high end top quality British Hi-Fi for a fraction of the new cost. Can post safely as I still have the original double box packaging that it came to me in. A real bargain at £499 plus p&p or you are welcome to pick it up. Read More

Jeff Rowland Phonostage phono amplifier suitable for The

Jeff Rowland Phonostage - top condition - only to be used in conjunction with a Jeff Rowland precursor! The phonostage does not have its own power supply. Excellent phono amplifier with fantastic sound and perfect processing.

Contact

• Next →