Oxygen Transfill SCUBA Tank Whips For
WARNING: messing with high pressure oxygen can result in injury, death and/or generally vast amounts of damage to property and people. You need to be prepared to accept the risk, design and use your system properly and be aware of the consequences of failure. The "Oxygen Hacker's Companion" (see separate listing) is an excellent resource to help avoid blowing yourself up. Please note: as most of these are made to order, it could take a week or two before they ship Custom Oxygen/Helium Transfill Whips The fittings and kits below are everything required to customĀ make any kind of oxygen or helium transfill whip you need. If you specify what youāre after, TFM Engineering can assemble with oxygen Teflon tape and test for you (leak test with air, and oxygen test).Hoses are Teflon-lined stainless steel braided, fittings are brass, chromed brass or stainless steel, and everything is cleaned for and compatible with high pressure oxygen. Standard Transfill and Booster Kits: Kit Name Description Price bar) Budget DIN transfiller 2 DIN fittings, a 1.2m hose and needle valve $bar) DIN transfiller with fill gauge As above but with gauge on downstream side $bar) Ultimate transfiller (no tank connectors) Upstream & downstream indicator gauges, female quick connects each end, Ā and needle valve. Add a digital gauge with quick connects for accurate mixing. Can be used for transfilling or with your booster. NO TANK CONNECTORS INCLUDED $ Tank connectors kit 2x DIN, 1x pin index (medical oxygen), 1x bullnose (helium), with male quick connects $ Tank connectors kit (with hand-tight bullnose & pin index) 2x DIN, 1x hand-tight pin index (medical oxygen), 1x hand-tight bullnose (helium), with male quick connects $ Removable digital gauge (345bar) Digital gauge on a SS tee with M/F quick connects so you can move it around Ā and put inline wherever you need to get accurate readings for tight control of mixes. 345bar rating. $bar)Budget DIN booster kit 1.8m upstream hose with needle valve & DIN, other end Ā¼ā MNPT. 1.2m downstream hose with DIN and Ā¼ā MNPT ends. (if your booster is BSPT, JIC or another thread, get in touch for extra adaptors) $ Ultimate 300bar Booster kit (downstream only) 1.2m hose, stainless steel and brass pressure fittings rated for 300bar. Indicator gauge & bleed, ending in female quick connect. Plus a male 1/4" NPT quick connect to screw into the upstream side of your booster to hook your Ultimate Transfiller onto. $495