myford pr11 planer

MYFORD PR11 Planer

This MYFORD PR11planer has been stripped, cleaned and made good as required. New motor Pulley and drive belt fitted. All new wiring. The blades have been professionally reground and reset to factory settings.The planer comes with acessories, including the very rare spring which eliminates the risk of kickbacks, to enable thicknessing. The planer sits on a purpose made stand with 5" rubber tyred castors. Unlike some modern counterparts, this machine is mad of heavy duty cast iron making the planer a precission piece of kit. A very sturdy machine ready to give another lifetime of faithful service. A 7 page instuctional, setup manual comes with the machine. Read More

MYFORD PR11 Planer

A very rare oportunity to purchase a MYFORD PR11 planer complete will all original accessories including the very elusive spring to enable the machine to be used as a thicknesser. The planer has been stripped, cleaned and made good as required, but not painted which maintains it's originality. Made of cast iron, not aluminium as some modern counterparts. The 3 planer blades have been professionally reground and reset to factory settings.The machine sits on a purpose made stand, which has a chipping shoot, as per MYFORD'S drawings. The stand has new castors which are braked. The machine is readyb to give another lifetimes service and comes with a 7 page instruction/ setup manual. Read More

MYFORD PR11 Planer

A very rare oportunity to purchase a MYFORD PR11 planer complete will all original accessories including the very elusive spring to enable the machine to be used as a thicknesser. The planer has been stripped, cleaned and made good as required, but not painted which maintains it's originality. Made of cast iron, not aluminium as some modern counterparts. The 3 planer blades have been professionally reground and reset to factory settings.The machine sits on a purpose made stand, which has a chipping shoot, as per MYFORD'S drawings. The stand has new castors which are braked. The machine is readyb to give another lifetimes service and comes with a 7 page instruction/ setup manual. Read more

Myford PR11 Planer Thicknessing Spring

Myford PR11 Planer. Spring for the thicknessing attachment, without this vital spring operating the planer to thickness material runs the risk of vicious kick back often resulting with serious results. If you own a Myford PR11 Planer this spring is a must have component. BRAND NEW Read More

Myford PR11 Planer Thicknessing Spring

Myford PR11 Planer. Spring for the thicknessing attachment, without this vital spring operating the planer to thickness material runs the risk of vicious kick back often resulting with serious results. If you own a Myford PR11 Planer this spring is a must have component. BRAND NEW Read more

Lathe: Myford / Drummond with Myford stand...

Lathe: Myford / Drummond with Myford stand, Pre ML7 Myford lathe with selection of change wheels, 3 jaw and 4 jaw chucks, face plate and other attachments.On Myford stand, itself alone worth £350.A good solid machine, ideal for serious engineers and previously owned by a respected craftsman.Currently in storage and needs a new home soon as the space is required. Showing a little surface rust that doesn't affect the integrity and quality of the machine.Please give me a call or an email to arrange a viewing.Advertised on other sites. Serious offers considered. £, Bournemouth,.

Myford ml7 lathe + Myford stand...

Myford ml7 lathe + Myford stand, Myford ml7 lathe + Myford stand comes with forward and reverse switch + oiler lathe in good condition and working order. £, Brighton, .

Myford ML7 Metal working Lathe, Myford ML7 modern small...

Myford ML7 Metal working Lathe, Myford ML7 modern small screw cutting Lathe.Distance between centres volt motor, complete with accessories. Mounted on a drip tray and cabinet. excellent condition. £, Horsham, .

PLANER, DUNLAP PLANER. 6" On wooden stand. £,...

PLANER, DUNLAP PLANER. 6"On wooden stand. £, Bristol,.

PLANER Black & Decker Planer i

PLANER Black Decker Planer in box VGC. ONO. 25 ()

Powertec Workbench WB-PR11

All-in-one machine: Strengthen your entire body Multiple adjustment height holes: Numbered for fast changes Solid and durable: 2 1/2" tubing on base Adjustable height bar rods: Customise to your fit Oval footplates: Fix rack to the ground for reduced wobble with heavier weight loads Exercises: Chin ups, dips, hanging leg raises, push ups, hanging leg twists, horizontal pull ups Safety features: Gravity Lock catches Maximum loads: lbs (Racking Section); 400lbs (Chin Up Bar); 400lbs (Dip Bar) Assembled dimensions: 50.6 x 66 x 84" (LxWxH); (50.6 x 66 x 84" (LxWxH) with Dip Bars on inner Side of Power Rack; 66 x 66 x 84" (LxWxH) with Dip Bars on outer side of Power Rack) Frame colour: Black Read More

MYFORD MYSTRO WOOD TURNING LATHE, MYFORD MYSTRO Wood...

MYFORD MYSTRO WOOD TURNING LATHE, MYFORD MYSTRO Wood turning lathe complete with heavy duty stand.4 jaw chuck, set of wood turning chisels40" between centresVariable speed control, extension bars to increase centre measurementSingle phaseEverything you need to be a professional wood turner also a box of accessories including face plate, tool rests etc £, Chesham,.

JCBD-PP Planer, JCBD-PP Planer for sale used whilst...

JCBD-PP Planer, JCBD-PP Planer for sale used whilst hanging 3 inside doors, no longer needed.Comes with hard carry case & full instructions. £, Littlehampton,.

Head Rev 80 Pro 170cm All Mountain Carving Skis incl. Head PR11 bindings

Head Rev 80 Pro 170cm Skis . Used for 4 weeks skiing (2 weeks in weeks in ). In good used condition. Few marks and nicks from normal use, queuing for chairs etc. One small base repair after going over tree root, which was done in resort on the day it happened. Great pair of skis for advancing skiers, strong and stable at speed. Ad ID: Delivery Service Consumer Credit

Myford ML2 Screw cutting Lathe, Myford ML2 Screw cutting...

Myford ML2 Screw cutting Lathe, Myford ML2 Screw cutting lathe complete with tool cabinet with over two hundred tools including 4 jaw chuck, vertical milling slide, face plate taps, dies, cutting tools, live center etc. Lathe mounted on bench (see pictures) £, Eastbourne,.

myford lathe

Includes electric motor,3jaw,4jaw,face plate, many change wheels enabling imperial & metric screwcutting, reversing switch, emergency stop button. Non standard professionally made headstock more ridged than original. Will also include some boxes of bits and bobs. Needs a good home. I have long retired from M/cycle racing and I don't use the lathe now. Read More

Myford Lathe

An old Myford ML2 lathe that I have just used for making wooden dowels. Sell either as is or can sell other parts if anyone one wants them, the bed is in very good condition, but some of the other parts are missing. It has a single phase motor and chuck, the chuck alone is very good and is worth £ Come and have a go on it -- for sale as is £ I am near Stamford Lincs Read more

Myford collets

In fitted wooden box, 9 imperial, 2 metric, complete with insertion and extraction tool plus nose cap, also some arbors used by clock maker. Read more

Myford Lathe

Myford Series M BGSC lathe. 3 Jaw S/C Chuck. 4 Jaw independent chuck. Backplate, Gears. Some tooling inc knurls, ball cutting jig. Read More

Myford lathe

Working order just purchased a lager lathe so now not needed Everything in picture comes with it chucks face plates milling attachment etc

Myford ML7

I’m selling my Myford ML7, it’s used (obviously) but a nice tidy thing in good order. It’s single phase and imperial. Its got a decent three jaw chuck on it. It doesn’t come with the qr toolpost in the picture but will come with a toolpost ready to use. It’s mounted on a flat piece of wood with a small control box for on, off and reverse. I’m looking for £650 which I think is sensible. I can chuck a few bits of tooling in to get you going too. Read more

Myford gears

hardly used total qty 9,as follows,60t, 55t,50t, 45t, 40t, 38t, 35t, 30t, 25t. plus p&p if needed Read More

Myford ML7R Lathe...

Myford ML7R Lathe, Late machine in very good condition on home made metal stand. Can be seen working.With 3 and 4 jaw chucks, drilling tailstock, change wheels and faceplate. Has been well looked after, no damage to bed. £, Radstock, .

MYFORD MILLING SLIDE ?

For Sale is a lathe milling slide I think it is Myford that is surplus to my requirements. I dont have the angle plate. I can post this for £6.99. Read More

MYFORD ML7 LATHE

Excellent condition, 3 jaw and 4 jaw chucks, vertical slide, changewheel set lathe has had low usage and is in very good condition Read More

Contact

• Next →