lathe motor

lathe motor

Motor for Colchester triumph round head lathe volt 5hp 3ph rpm 50hz worked ok when taken from lathe Read More

Centrix woodworking lathe-less motor

Centrix woodworking lathe,one metre long-no electric motor-lathe is made from aluminium and in good condition Read more

Single Phase Lathe Motor in Brandon

Bought but never used, probably 1/4hp, but maybe 1/2hp! A heavy quality item. Not needed now, so selling cheaply. Collection only IP27 0RH due to weigh, although once paid, could deliver within 30 miles for petrol..

ELECTRIC MOTOR TO SUIT MYFORD LATHE

Single phase (230 volt) Motor 550 watts (2/3 h.p.). Removed from my Myford Super 7 lathe when converting to 3-phase system. Made by EMAC of Scotland. Complete with capacitor and shaft key. Good clean condition, tests OK. With good resilient (rubber) mounting rings to fit your existing motor cradle. Postage £10 or collect from close to M6 Jn 27. Read More

Lathe or milling machine motor with electromagnetic clutch

Crompton Parkinson 1.5hp 240v motor With Start capacitor And forward and reverse switch Clarke electric electromagnetic clutch operated via a 24v DC input Perfect working order £150 Read More

ELECTRIC MOTOR TO SUIT MYFORD OR SIMILAR LATHE.

Single phase (230 volt) Motor 550 watts (2/3 h.p.). Removed from my Myford Super 7 lathe when converting to 3-phase system. Made by EMAC of Scotland. Complete with capacitor & shaft key. Good clean condition, tests OK. With good resilient mounting rings to fit your existing motor cradle. Post free or collect from close to M6 Jn 27 and save £5.. Possible £25 part-ex for similar -phase motor in good condition (callers only). Read More

ELECTRIC MOTOR TO SUIT MYFORD OR SIMILAR LATHE.

Single phase (230 volt) Motor 550 watts (2/3 h.p.). Removed from my Myford Super 7 lathe when converting to 3-phase system. Made by EMAC of Scotland. Complete with capacitor & shaft key. Good clean condition, tests OK. With good resilient mounting rings to fit your existing motor cradle. Post free or collect from close to M6 Jn 27 and save £5.. Possible £25 part-ex for similar -phase 1-h.p. motor in good condition (callers only). Read More

Tyme Wood turning Lathe half HP motor in Reading

Tyme woodturning lathe 1.00m bed and 0.5m bed plus Record set of woodturning chisels Nova centre chuck This is a very havey item for collection only

WANTED, 3-PHASE MOTOR for MYFORD series 7 lathe.

I am looking for a 3-phase resiliently-mounted motor to suit my Myford Super 7. Must be dual voltage -phase 3/4 to 1-h.p. motor in good working condition. I have an excellent single phase (230 volt) Motor 550 watts (2/3 h.p.) to suit a Myford lathe. See photos. Made by EMAC of Scotland. Complete with capacitor & shaft key. Good clean condition, tests OK. With good resilient mounting rings to fit your existing motor cradle. I will sell it for £70 or consider a comparable part-exchange. Read More

WANTED, 3-PHASE MOTOR TO SUIT MYFORD SERIES 7 LATHE.

I have an excellent single phase (230 volt) Motor 550 watts (2/3 h.p.). Removed from Myford Super 7 lathe. See photos. Made by EMAC of Scotland. Complete with capacitor & shaft key. Good clean condition, tests OK. With good resilient mounting rings to fit your existing motor cradle. I will sell it for £70 or may part-exchange it for a comparable 3-phase resiliently-mounted motor. Must be dual voltage -phase 3/4 to 1-h.p. motor in good working condition. Read More

New & Unused 230 volt motor for MYFORD Series 7 lathe

I have for sale a new 230 volt, 550 watts (3/4 h.p.) rpm resiliently-mounted motor bought (in error) for my lathe rebuild. See photos. Complete with capacitor & shaft key. The shaft (still with its protective blue coating) is mm) x 2" (50 mm). Runs almost silently. Price includes carriage to all except remote areas, for which I can quote the extra price on receipt of your postcode. I also want a sound 230-volt Myford compatible coolant pump priced at around £50. Read More

SAVE £50. New 230 volt motor for MYFORD Series 7 lathe.

I have for sale a new 230 volt, 550 watts (3/4 h.p.) rpm resiliently-mounted motor bought (in error) for my lathe rebuild. See photos. Complete with capacitor & shaft key. The shaft (still with its protective blue coating) is mm) x 2" (50 mm). Runs almost silently. My price includes carriage to all except remote areas, for which I can quote the extra price on receipt of your postcode.. I also want a sound 230-volt Myford compatible coolant pump with a stem length of 180 mm. priced at around £50. Read More

SAVE £50. New 230 volt motor for MYFORD Super 7 lathe.

I have for sale a new 230 volt, 550 watts (3/4 h.p.) rpm resiliently-mounted motor bought (in error) for my lathe rebuild. See photos. Complete with capacitor & shaft key. The shaft (still with its protective blue coating) is mm) x 2" (50 mm). Runs almost silently on test. My price includes carriage to all except remote areas, for which I can quote the extra price on receipt of your postcode.. I need a similar 3-phase motor for my lathe, which has an inverter drive, and would consider a part-exchange on the above or a direct swap if your motor 3-phase motor is in new condition.. I also need a sound 230-volt Myford compatible coolant pump with a stem length of 180 mm. priced at around £50. Read More

SAVE £50. New 230 volt motor for MYFORD Series 7 lathe.

I have for sale a new 230 volt, 550 watts (3/4 h.p.) rpm resiliently-mounted motor bought (in error) for my lathe rebuild. See photos. Complete with capacitor & shaft key. The shaft (still with its protective blue coating) is mm) x 2" (50 mm). Runs almost silently. My price includes carriage to all except remote areas, for which I can quote the extra price on receipt of your postcode.. I need a similar 3-phase motor for my lathe, which has an inverter drive, and would consider a part-exchange on the above or a direct swap if your motor 3-phase motor is in new condition.. I also need a sound 230-volt Myford compatible coolant pump with a stem length of 180 mm. priced at around £50. Read More

1/4 hp GEC Motor for small lathe, drill or grinder, etc.

This 1/4 hp motor is a British 240 volt, rpm machine with resilient mounting. Would drive a small lathe, e.g. Myford ML10. It has a 1/2" diameter shaft 2" long. Runs very quietly, just needs a coat of paint. Collect or pay carriage, approx £10. Read More

1/4 hp GEC Motor for small lathe, drill or other machine

This 1/4 hp motor is a 240 volt, rpm machine with resilient mounting. Would drive a small lathe, e.g. Myford ML10. It has a 1/2" diameter shaft 2" long. Runs very quietly, but needs a coat of paint. Collect or pay carriage, approx £10. Read More

DIGITAL PHASE CONVERTORS X 3 - GOOD CONDITION - 240V INPUT- 415V OUTPUT - LATHE, MILLING, MOTOR

3 X DIGITAL PHASE CONVERTORS - 240V - 415V - FULLY ADJUSTABLE IDEAL FOR LATHES, MILLING MACHINES, PILAR DRILLS, INDUSTRIAL MOTORS. GOOD CONDITIN, HYUNDAI, FENNER AND DIRECT DRIVES - USED - SELLING AS JOB LOT O.N.O Ad ID: Delivery Service Consumer Credit

myford Steel turning Lathe, lathe on original stand...

myford Steel turning Lathe, lathe on original stand manufactured approx 35 years is in good working order.3 jaw chuck andface plate £, Llanelli, .

Large High Quality Industrial Metal Lathe / Wood Lathe

industrial lathe, can be used for both metal and wood.. very heavy cast iron legs etc.. steal top.. overall approximately 150kg Perfect working order, Clarke Motor 1.5hp, very smooth operation Read More

LATHE clarke CL500M Professional Metal Lathe Mill/Drill

6-7 year old Clarke lathe Mill/Drill. Never been used. It has been kept in a dry shed for the past 4-5 years all the accessories are still wrapped. there is a very small amount of tarnishing on the bare steel but nothing that a little TLC can't quickly get sorted. the full description is pictured from a recent catalogue. THE PICTURED FLOOR STAND IS NOT PART OF THIS SALE. to the best of my knowledge all the belts and accessories are present and a part of this sale This is an extremely heavy piece of machinery even when the mill/drill is detached. Delivery is possible but that will have to be a separate negotiation accepted payment of PayPal C.O.D. C.O.C. Read More

LATHE clarke CL500M Professional Metal Lathe Mill/Drill

6-7 year old Clarke lathe Mill/Drill. Never been used. It has been kept in a dry shed for the past 4-5 years all the accessories are still wrapped. there is a very small amount of tarnishing on the bare steel but nothing that a little TLC can't quickly get sorted. the full description is pictured from a recent catalogue. THE PICTURED FLOOR STAND IS NOT PART OF THIS SALE. to the best of my knowledge all the belts and accessories are present and a part of this sale This is an extremely heavy piece of machinery even when the mill/drill is detached. Delivery is possible but that will have to be a separate negotiation accepted payment of PayPal C.O.D. C.O.C Read More

Myford Lathe ML10 (Metal lathe) in Guildford

Myford ML10, used condition, forward and backwards motor however the motor is underpowered for the machine. Has a new lead screw clutch fitted. Comes with some change wheels (see photo) Face plate. 3 jaw chuck. Lathe Manual Serial No.

nova g3 lathe chuck 3/4x16tpi for wood lathe brand new boxed

for sale a brand new boxed nova g3 chuck for wood lathe 3/4x16tpi all complete with chuck body a set of standard nova jaws. faceplate and worm chuck both fit in the chuck it is all there with manual and chuck key you can see all the pictures clearly on you can collect or have it posted at cost via hermes

Wood Lathe SWAP for Metal Lathe

This could be for for Temporary or Permanent Arrangement, choice of 3 for availability. For a quick project. Or Willing to buy unit, or possibly rent item. Read More

the wade lathe co company CAV small tools limited metal lathe free local delivery

Works. Small amount of room on the far left shaft and the small hand control on the right. Chuck is not a proper chuck key. Organise your own courier. Ad ID: Delivery Service Consumer Credit

Contact

• Next →