grp storage cradle for evolution yacht

GRP storage cradle for Evolution  yacht

GRP storage cradle for Evolution yacht

Available is a GRP storage cradle, which was supplied by the factory as part of the road trailer for my Evolution 26 yacht.  The latter is now in a poor state and only any use as a yard trailer; but the cradle is moulded to a galvanised sub-frame which is attached to the trailer chassis with four bolts and is therefore readily removable and could be transported by roof rack.  The cradle is moulded to the hull shape of the yacht, and is also suitable for the Evolution 25, which has the same hull form. Nominal price only, but in addition I suggest a donation to RNLI. Ad ID:

GRP storage cradle for Evolution  yacht

GRP storage cradle for Evolution yacht

Available is a GRP storage cradle, which was supplied by the factory as part of the road trailer for my Evolution 26 yacht.  The latter is now in a poor state and only any use as a yard trailer; but the cradle is moulded to a galvanised sub-frame which is attached to the trailer chassis with four bolts and is therefore readily removable and could be transported by roof rack.  The cradle is moulded to the hull shape of the yacht, and is also suitable for the Evolution 25, which has the same hull form. Nominal price only, but in addition I suggest a donation to RNLI. Read More

Related products grp storage cradle for evolution yacht: GRP storage cradle for Evolution yacht
Yacht cradle suitable for a yacht around 32ft LOA. Would accomodate a larger yacht.

Yacht cradle suitable for a yacht around 32ft LOA. Would accomodate a larger yacht.

This cradle was used to store my boat last winter. I dismantled it and took it home and it is currently stored on a pallet in my garden. It is flexible and can be adjusted to fit larger yachts. It fits in the back of my large estate car or a van. It is quite heavy as it is sturdily built. There are a couple of acrows and various straps and chain that can be seen in the photos. However, the boat is not included. Ad ID: Delivery Service Consumer Credit

Boat Cradle Yacht Storage Boat Yacht Stand Legs

Boat Cradle Yacht Storage Boat Yacht Stand Legs

Adjustable yacht/boat cradle. Four legs to fit boats 26' to 36'. Good condition, galvanised, heavy duty, and easy to set up. The yacht cradle has previously been used to store my Vancouver 32 and is now surplus to requirements. Fully adjustable, good quality, galvanised to BS 729 standards. Easy to assemble/disassemble for storage/transportation. Easily adjustable to suit many different hull types. Robust, heavily engineered. Cradle 10 ft wide, 12ft long. Folds down to approx 3ft x 8ft for transportation. Galvanised solid quality adjustable, will fold together to fit onto trailer. Buyer to collect from Plymouth/Tamar area. Collection will require own transport. Cash on collection preferred from PL12 Read More

Related products grp storage cradle for evolution yacht: Boat Cradle Yacht Storage Boat Yacht Stand Legs
Yacht cradle,boat,sailing boat,stands,yacht legs,yard,cradle,jacks,supports,fin keel,long keel

Yacht cradle,boat,sailing boat,stands,yacht legs,yard,cradle,jacks,supports,fin keel,long keel

Solid yacht cradle mm wide long with a support/Jack height from mm Ideal for yachts from aprox ft Quick sale needed due to storage and sell of yacht. £300 ono Call, Ad ID: Delivery Service Consumer Credit

Galvanised steel adjustable and collapsable boat yacht cradle storage

Galvanised steel adjustable and collapsable boat yacht cradle storage

Adjustable and collapsible galvanised steel yacht/boat cradle - The cradle is height adjustable for ease of work, or for fixed or lifting keels - The design is fully collapsible for easier storage and transport. Can be dismantled by unbolting the fixings on each corner to collapse into 4 parts. - The cradle currently fits a Hunter Sonata (22.5'), but the wooden supports (9 x 3 timber) can be easily altered to suit different hull shapes. - Approximate measurements: Width: 2m Length: 2.62m Height: 0.88m (extends to 1.4m) The cradle is currently located in Penzance, Cornwall. Call or text Becca: or Ross: Ad ID:

Related products grp storage cradle for evolution yacht: Galvanised steel adjustable and collapsable boat yacht cradle storage
YACHT CRADLE for Laying up Max 9 metre yacht. Portable in sections. Galvanised steel sections.

YACHT CRADLE for Laying up Max 9 metre yacht. Portable in sections. Galvanised steel sections.

Portable Yacht Cradle in 15 sections plus four Pads. Manufactured by European Yachting Equipment. Galvanised steel sections with Accrow prop adjustments. Currently set up for an 8 Metre yacht. as shown in picture. Stored in Garage when not in use. In very good condition. Can be transported in small sections. Ad ID: Delivery Service Consumer Credit

boat cradle suite 10 metre yacht. {its the cradle for sale not the boat]

boat cradle suite 10 metre yacht. {its the cradle for sale not the boat]

boat cradle suite 10 metre yacht. [NB: the cradle is for sale not the boat].

Related products grp storage cradle for evolution yacht: boat cradle suite 10 metre yacht. {its the cradle for sale not the boat]
Steel Cradle for yacht in Kingsbridge

Steel Cradle for yacht in Kingsbridge

Heavy duty steel cradle for fin keel yacht of around 26ft, (but would possibly also fit between ft). Adjustable accrows at corners, (three pads not shown in photo, one missing need refixing to supports). Cradle somewhat rusty but serviceable after a little maintenance. View in Kingsbridge. Priced to clear £65.

Yacht Cradle. Fully adjustable for yachts to 29ft.

Yacht Cradle. Fully adjustable for yachts to 29ft.

Galvanised steel frame, with adjustable frame and legs to suit yachts up to 29ft. Easy to assemble and adjust.. Used for one season only and then stored in my garage since. Purchased from Atlas Cradles for £. Ad ID: Delivery Service Consumer Credit

Related products grp storage cradle for evolution yacht: Yacht Cradle. Fully adjustable for yachts to 29ft.
yacht cradle £200 ONO or swop for inflatable tender

yacht cradle £200 ONO or swop for inflatable tender

Industrial strength yacht cradle (8 cwt) last used for a Tomahawk 25. floor size 11 ft 4" (3.5m) by 7 ft (2.15 m). Strong enough to attach wheels if wanted. Buyer uplifts Ad ID: Delivery Service Consumer Credit

GALVANISED TENAMAST YACHT CRADLE FOR A DEEP KEEL BOAT

GALVANISED TENAMAST YACHT CRADLE FOR A DEEP KEEL BOAT

Galvanised yacht cradle fully adjustable and built by Tenamast about 5-6 years ago. Will support a yacht up to about 30 ft and 6 ft draft and 10 ft beam. Currently shown at its smallest for a Contessa 26 but have used it for a Vertue and a Contessa 32. Dismantles easily and can be transported on a small trailer or in a large estate car. I can deliver for £1/mile one way. Really good value as they are £ new Ad ID: Delivery Service Consumer Credit

Related products grp storage cradle for evolution yacht: GALVANISED TENAMAST YACHT CRADLE FOR A DEEP KEEL BOAT
Yacht Cradle to suit 35' to 40' yacht

Yacht Cradle to suit 35' to 40' yacht

3.35 m long, 3.0 m wide, adjustable legs, suits 35' to 40' yacht. Light rust otherwise OK. Transportable on car trailer (on its side). Ad ID: Delivery Service Consumer Credit

25ft GRP Yacht

25ft GRP Yacht

25 ft Grp yacht very good condition Beta Marine 20hp inboard diesel. less than 30hrs all new interior, electrics, cooker etc. sleeps 4 people. currently berthed in Avoch harbour. dues paid till march . very good sea boat. Now selling at a give away price of £ As other commitments force me to sell. Grab a bargain Ad ID: Delivery Service Consumer Credit

Related products grp storage cradle for evolution yacht: 25ft GRP Yacht
Flying 15 GRP racing yacht. Has been laid up for 2 years but is not a project

Flying 15 GRP racing yacht. Has been laid up for 2 years but is not a project

Ill health forces sale of this very popular international class of keel boat. It is built of GRP and its spars are aluminium, Sails are OK and has main, genoa and foresail. It sits on a substantial launching trolley. There is a worn overall cover that will act as pattern for a new one. The boat is lying Poole and a delivery trailer is available to rent at £50 per day. Viewing is desired. The sail number is and the Flying 15 is a popular racing class in UK and Europe. Look on their website for more details. Ad ID: Delivery Service Consumer Credit

Yacht cradle

Yacht cradle

Yacht cradle to suit ft boat. 6 adjustable props, and separate bow support leg Can be easily dismantled / and assembled for delivery. Collection only £350 ono Ad ID: Delivery Services Consumer Credit

Related products grp storage cradle for evolution yacht: Yacht cradle
Yacht Cradle

Yacht Cradle

Yacht leg TC7 cradle Suitable for up to m yacht 6’6” / 2m draft £ new Good condition Ad ID: Delivery Service Consumer Credit

Yacht cradle

Yacht cradle

Jacobs 6 leg yacht cradle. Cradle length 6 metres, centre base 4 metres wide, bow and stern bases 3.5 metres wide; long legs adjustable 1.5 to 2 metres. Used to store 12.5 metre yacht with 3.85 metre beam; suitable for similar. The cradle was new in . Collect from the Oban area; can be dismantled for transport Ad ID: Delivery Service Consumer Credit

Related products grp storage cradle for evolution yacht: Yacht cradle
Yacht cradle

Yacht cradle

Galvanised fully adjustable yacht cradle. 12 foot by 9 foot base splits into three parts for easy transportation. Suit 25 to 36 foot fin keel yacht Read More

Yacht cradle

Yacht cradle

Yacht cradle suitable for boats up to 28ft. Self assembly using scaffold poles, couplers together with 4 x adjustable Acrow props and pads. Reasonable offers considered. They are currently stored in Gosport. Ad ID: Delivery Service Consumer Credit

Related products grp storage cradle for evolution yacht: Yacht cradle
Yacht Cradle

Yacht Cradle

Heavy duty steel cradle for winter storage of cruising yachts up to 40 ft in length, fully adjustable. Read More

Boat yacht cradle

Boat yacht cradle

Sold sold Boat cradle, very strong steel cradle on large swivel nylon wheels, it has been used on a 24ft fin keel yacht, I think it would take larger or smaller boats, delivery is possible or collection from Bradford West Yorkshire Read More

Related products grp storage cradle for evolution yacht: Boat yacht cradle
steel yacht cradle

steel yacht cradle

very strong steel yacht cradle,measures 3.5m x 2.5m uprights adjust 1m x 1.35m.all can be adjusted to fit hull.collection only.thanks DISMANTLED READY FOR COLLECTION. thanks Ad ID: Delivery Service Consumer Credit

JACOBS YACHT CRADLE

JACOBS YACHT CRADLE

Suitable for ' yacht (4 legs plus bow support). Cost £ used once. Can be delivered locally if required. ALSO HAS BOW SUPPORT (photo shows similar but no bow support) Ad ID: Delivery Service Consumer Credit

Related products grp storage cradle for evolution yacht: JACOBS YACHT CRADLE
Portable Yacht Cradle

Portable Yacht Cradle

Adjustable, portable yacht cradle to suit boat of feet. Very solidly constructed, painted but with some superficial surface rust. Will fit in the back of a medium sized car. Will need to be picked up from portishead.

Contact