Danelectro Free Speech Talk Box With Built
Your FREE SPEECH Talk Box comes with everything you need to create some of the coolest sounds to ever come out of your mouth. Unlike other Talk Boxes,there is no need for a separate Microphone, PA System or even a second amplifier. Simply plug it in between your guitar and amp—just like you would with any other stomp box.Then put the tube in your mouth and start yackin’! HOW IT WORKS: Your guitar signal arrives at the input jack.Inside of the FREE SPEECH,the signal is amplified and sent to your mouth via the Dan-O-Tube. Once inside your mouth, it’s up to you to shape your mouth and manipulate the sound.As the sound comes out of your mouth it is picked up by the two miniature microphones attached to the Dan-O-Tube.The microphones transmit the sound back to the pedal and the output jack of the pedal directs the sound to your amp. HOW TO GET STARTED: 1. Unwrap and uncoil your Dan-O-Tube.The Tube Port is taped to the end of the tube with the microphones. 2. The Tube Port will slide easily into any (standard sized) mic clip attached to a mic stand. 3. Connect the other end of the Dan-O-Tube to the tube receptacle on the top of the pedal. 4. Plug the mic cable into the MIC jack on the back of the pedal. 5. Connect instrument cable to the IN jack.(Battery is activated when cable is connected to IN jack.) 6. Connect amplifier cable to the OUT jack. 7. If using Danelectro AC Adaptor (NOT SUPPLIED), connect to DC 9-Volt jack. For Battery power, connect 9 Volt battery (supplied) in Battery Compartment on the bottom of this unit. LED light will be on when foot switch is activated. CONTROL FUNCTIONS: VOL: Adjusts the amount of effect (Mic Level) sent to your amplifier. GROWL: Use this control to adjust the amount of overdrive