beomaster tuner amplifier fwo vgc rare rosewood

BeoMaster Tuner/ Amplifier - FWO, VGC - Rare Rosewood

BeoMaster Tuner/ Amplifier - FWO, VGC - in the rare and sought after Rosewood finish (this was the premium finish of the three offered). Classic Jacob Jensen design as exhibited in MoMA. Power output; 2 x 30 W RMS; 2 x 60 W music power Speaker impedance: 4 ohms Distortion: Intermodulation: Bass control range: +/- 17 dB at 50 Hz Treble control range: +/- 14 dB at Hz Tuning range: MHz Dimensions: W x H x D: 58 x 9.5 x 26cm Weight: 8.7 kg Power consumption: W Connections: Phono: 1 DIN Phono: 2 DIN Tape: DIN Headphone socket Speakers: 3 sets Happy to demonstrate

Pioneer SA-540 Amplifier, FWO, VGC - Phono

Pioneer SA-540 Integrated SS Amplifier in FWO and VGC – Phono Stage Early Eighties vintage, manufactured in Japan to the renowned high build quality of the period. Great sounding amp, very controlled sound with tight bass and clear, precise mids and highs. Rated at 35wpc RMS (8 ohm) though really punches above that and more than capable of driving demanding speakers. All contacts, switches and pots have be cleaned/ de-oxidised. Size in cm: Width: 42, Height: 11, Depth: 24 Happy to demonstrate Read More

Sherwood R tuner-amplifier 2x50W vgc

This unit from US audio specialists Sherwood is technically an AV receiver, but since it doesn’t have any modern audio visual or digital inputs, just old-hat Dolby Pro Logic and Dolby 3 stereo, just consider it a pretty tasty hifi stereo amp with a good RDS FM/AM tuner (30 presets) thrown in and the facility to output to an additional centre speaker and a sub-woofer. It sounds very clean and punchy through decent speakers, the radio tuner is sensitive and gives good distortion-free reproduction, there’s a headphone socket and a full-function remote included – all you need for a good base for a hifi set-up. There’s also a convenient set of audio video inputs at the front which you could plug in a minijack to phono cable adapter to play your iPod, phone, laptop etc. Absolute steal at £49; in good physical and working order, serviced and ready to plug and play. Complete with original paper manual and remote handset, also tested and working. Obviously you'll need to have a proper external aerial to receive high quality radio broadcasts. free to collect or deliver from Wirral/ Wrexham areas. Read More

Band olufson beomaster amp tuner

Vintage b and o amplifier/ tuner from late 70's. Perfect working order has outputs for two pairs speakers and turntable and 2 other outputs such as cd player tape deck or even music streamer. Looks lovely and fantastic sound quality. Read more

Bang & Olufsen Beomaster Master Tuner/Amp

Bang & Olufsen Beomaster Tuner/Amp Working example of this classic B&O receiver, in good cosmetic condition aside from a few light marks on top and sides of unit Some screws missing to attach top casing to base,and the red LED display does not display correctly but this does not interfere with operations including selecting FM stations which are done simply by choosing each station with advance or return buttons and storing stations to memory. 50 watts RMS per channel. All operational functions available from fold down panel - see pic 2. The only thing this doesn't do is alter the bass/treble tone and channel balance, but its great with a a flat tone response. Comes with 2 DIN loudspeaker plugs (screw type) for connecting up to speakers and 2 x 5pin DIN to 2 phono plugs, so you have a full range of inputs for CD, iPod etc. Read More

RARE Vintage British Rogers Ravensbrook FET FM Tuner - VGC

Vintage Rogers Ravensbrook FETR FM Tuner from this classic British hifi manufacturer. Full working order and VGC. Lovely warm smooth sound. Serial No. Type: Mono/Stereo Tuner Tuning Bands: FM Tuning Scale: Analogue FM Tuning Range: 88 to 108 MHz Read More

RARE Vintage British Rogers Ravensbrook FET FM Tuner - VGC

Vintage Rogers Ravensbrook FETR FM Tuner from this classic British hifi manufacturer. Full working order and VGC. Lovely warm smooth sound. Serial No. Type: Mono/Stereo Tuner Tuning Bands: FM Tuning Scale: Analogue FM Tuning Range: 88 to 108 MHz

Bang & Olufsen Beomaster & Beogram CD Rare Great

Bang & Olufsen Beomaster & Beogram CD Rare Great Condition Full Working Order A very rare item. We have a number of Bang & Olufsen items available so please contact for more details. Delivery can be arranged. Please contact with any questions. Sensible offers will be accepted.

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC Great sounding turntable. Goldring ELAN cartridge. Features of the Yamaha YP-211 include a powerful multi-pole synchronous motor, belt drive for low wow and flutter, auto-return and auto-cut features designed for optimum operating convenience and a sensitive S-type static balance tone arm with cueing lever and inside force canceller. Manufactured in (MRP £110 at time), typical Yamaha TT quality of the period. Pure, clean design using quality materials/ components and high engineering standards. Specifications: Motor: 4-pole synchronous motor; Platter: 300mm die-cast aluminium; Speeds: 33 and 45rpm; Drive system: belt drive; Signal to noise ratio: better than 52dB; Wow and flutter: better than 0.08% WRMS; Type: S-type static balance; Effective length: 215mm; Overhang: 15mm; Cartridge weight: 5 to 11g; Dimensions: 435 x 150 x 361mm; Weight: 6kg. Happy to demonstrate. Read More

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC Great sounding turntable. Features of the Yamaha YP-211 include a powerful multi-pole synchronous motor, belt drive for low wow and flutter, auto-return and auto-cut features designed for optimum operating convenience and a sensitive S-type static balance tone arm with cueing lever and inside force canceller. Manufactured in (MRP £110 at time), typical Yamaha TT quality of the period. Pure, clean design using quality materials/ components and high engineering standards. Specifications: Motor: 4-pole synchronous motor; Platter: 300mm die-cast aluminium; Speeds: 33 and 45rpm; Drive system: belt drive; Signal to noise ratio: better than 52dB; Wow and flutter: better than 0.08% WRMS; Type: S-type static balance; Effective length: 215mm; Overhang: 15mm; Cartridge weight: 5 to 11g; Dimensions: 435 x 150 x 361mm; Weight: 6kg. Happy to demonstrate. Read More

Philips CD600 Cd Player - TDA DAC - VGC, FWO

Philips CD600 Cd Player - VGC, FWO with TDA DAC Great sounding CDP. The TDA DAC truly lives up to it's cult status amongst digital audiophiles. Refer to the internet for the highly regarded reviews and technical analysis of this unit. Specifications: Disc format: CD Digital converter: TDA CD Mechanism: CDM-4/19 Frequency response: 20Hz to 20kHz Dynamic range: 80dB Signal to Noise Ratio: 90dB Channel separation: 80dB Total harmonic distortion: 0.05% Line output: 2V Dimensions: 420 x 280 x 104mm Weight: 3.8kg Happy to demonstrate Read More

Pioneer PL-12D Turntable in FWO and VGC

Pioneer PL-12D Turntable in FWO and VGC Great sounding and easy to use belt driven turntable. Specifications: Motor: 4-pole synchronous motor Drive: belt driven Speeds: 33 and 45rpm Speed accuracy: 1.0% or less Wow and flutter: 0.1% WRMS Rumble: 47dB Platter: 30cm aluminium alloy Tonearm: s-shaped pipe Effective length: 221mm Dimensions: 430 x x 349mm Weight: 7.5kg Happy to demonstrate

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC

Yamaha YP-211 - Belt-Drive Turntable – FWO, VGC Great sounding turntable. Features of the Yamaha YP-211 include a powerful multi-pole synchronous motor, belt drive for low wow and flutter, auto-return and auto-cut features designed for optimum operating convenience and a sensitive S-type static balance tone arm with cueing lever and inside force canceller. Manufactured in (MRP £110 at time), typical Yamaha TT quality of the period. Pure, clean design using quality materials/ components and high engineering standards. Specifications: Motor: 4-pole synchronous motor; Platter: 300mm die-cast aluminium; Speeds: 33 and 45rpm; Drive system: belt drive; Signal to noise ratio: better than 52dB; Wow and flutter: better than 0.08% WRMS; Type: S-type static balance; Effective length: 215mm; Overhang: 15mm; Cartridge weight: 5 to 11g; Dimensions: 435 x 150 x 361mm; Weight: 6kg. Happy to demonstrate.

KEF Concord IV Floor Standing Loudspeakers in FWO/ VGC

KEF Concord IV is a free-standing loudspeaker system incorporating many features resulting from KEF’s programme of advanced research and development. Concord IV offers precise and stable stereo reproduction for the serious listener together with ample volume for the most extreme domestic use. A maximum acoustic output of 107dB spl can be obtained on programme peaks. Concord IV Features: High power handling capacity: 100 watts per channel. High acoustic output: 107dB spl on programme peaks. For use with amplifiers of more than 10 watts per channel. Interchangeable grille covers in black, brown, beige, blue, red green or grey to suit your decor. Concord IV Specifications Frequency range: - 60Hz to 20kHz ± 3dB at 2m on reference axis (-10dB at 40Hz and 25kHz); Directional characteristics: - Horizontal: within ± 2dB of axial response up to 10kHz for ± 20º - Vertical: within ± 2dB of axial response up to 20kHz for ± 5º; Maximum output: - 107dB spl on programme peaks under typical listening conditions; Character sensitivity level: - 87dB spl at 1m on measuring axis for pink noise input of 1W; Distortion: - Second harmonic: less than 2% from 20Hz to 80Hz, less than 1% from 80Hz to 20kHz; Third harmonic: less than 1% from 20Hz to 20kHz; Measured at 1m on measuring axis at mean spl of 90dB, anechoic conditions Enclosure type: - Closed box Programme rating: - 100W Maximum continuous sinusoidal input 28V rms from 60Hz to 2kHz reducing 10Vrms from 2.5kHz to 20kHz Minimum amplifier requirement: - 10W Nominal impedance: - 8 ohms Resonance frequency: - 68Hz Total system Q: - 0.8 Dimensions: - 692 x 280 x 315 mm Weight: - 12.7kg (28lb) Internal volume: - 38 litres Concord IV Benefits The addition of quality loudspeakers to an existing rack system or music centre - or even a portable radio - will dramatically improve sound quality. As loudspeaker specialists, KEF concentrate on the design and production of high fidelity loudspeakers, and have employed the latest computer aided analysis techniques to develop Concord IV. With and amplifier output of as little as 10 watts per channel, Concorde IV will produce more than enough volume to fill a generous sized room. With larger amplifiers, considerably louder volume levels can be achieved whilst maintaining realistic tonal quality. Concord IV is a medium-sized (38 litres) loudspeaker system combining a 25mm soft dome tweeter with two 200mm bass units to give extended bass performance down to 40Hz. The two identical bass units are arranged to work together over the lower part of the frequency range ensuring reduced distortion and remarkable power handling capability. To obtain an even distribution of sound a new filter system progressively reduces the output of the lower bass unit above 200Hz. At crossover frequency only one bass unit is operating with the tweeter. To allow the sound to reach the listener directly without troublesome reflections from walls, floor ceiling the drive units are arranged within the enclosure so that the full frequency response is enjoyed when the loudspeakers are positioned between 9” and 12” from the floor. Happy to demonstrate

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg Read More

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg

Pioneer PL-12D Turntable, FWO, VGC, Shure M75ED Type 2

Pioneer PL-12D Turntable in FWO, VGC with Shure M75ED Type 2 cartridge and Shure N75ED-T2 stylus. Great sounding and easy to use belt driven turntable. Plenty of tight controlled bass. Suspension spring damping foam replaced. Specifications: Motor: 4-pole synchronous motor Drive: belt driven Speeds: 33 and 45rpm Speed accuracy: 1.0% or less Wow and flutter: 0.1% WRMS Rumble: 47dB Platter: 30cm aluminium alloy Tonearm: s-shaped pipe Effective length: 221mm Dimensions: 430 x x 349mm Weight: 7.5kg Happy to demonstrate Read More

Yamaha DSP-A - Receiver in FWO, VGC, Box – Phono Stage

Yamaha DSP-A - Receiver in FWO, VGC, Box, Manual, Remote – Phono Stage I have been using this audiophile quality heavyweight performer as a 2-Channel music amp for a number of years. These units sold for £ in and used the highest quality components (Nichicon etc.) and engineering know how. At over 20kg the build quality is of the highest standard. These are very musical amps with an abundance of power that can drive the most demanding of speakers. The phono stage is an impressive solid performer. Specifications: Power Output: 80 watts per channel into 8? (stereo) Surround Output: 80W (front), 80W (center), 25W (rear) Frequency Response: 20Hz to 20kHz Total Harmonic Distortion: % Input Sensitivity: 2.5mV (MM), 150mV (line) Signal to Noise Ratio: 96dB (line) Output: 150mV (line) Speaker Load Impedance: 4? to 16? Video Connections: composite, SVHS Dimensions: 435 x 170 x mm Weight: 21kg Accessories: remote control Happy to demonstrate Read More

Bespoke Vintage 2-Way Bookshelf Loudspeakers in VGC and FWO

Bespoke Vintage 2-Way Bookshelf Loudspeakers in VGC and FWO. Great sounding speakers with accurate tight bass in a rigid heavy sealed cabinet. Built locally during the early 70s when speakers were commonly sold in kit/ component form. Vintage Wharfedale drivers and crossover. You can make out the distinctive lilac tweeter widely used by Wharfdale in their speakers of the period. Happy to demonstrate and compare.

TEAC A-360 High End Stereo Cassette Deck - FWO, VGC

TEAC A-360 High End Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg

TEAC A-360 High End Stereo Cassette Deck - FWO, VGC

TEAC A-360 High End Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg Read More

Guitar Amplifier Roland AC-33 Acoustic Chorus Guitar Amplifier (Rosewood)

Still in box. great deal sounds great when I tried it in the shop. can post it but will be added on to final price, spec is below. paid £369 Roland introducing the AC-33RW Acoustic Chorus Amp, which is the world’s first battery-powered amp made just for acoustic guitar. The AC33 is a portable and powerful, true stereo amplifier. The Acoustic Amp has many features including Guitar and Mic/Line channels, custom effects, anti-feedback, and a really handy Phrase Looper for all your practice needs. Thanks to its unique battery-power capability, the AC-33 lets you take your songs anywhere and wherever your imagination leads you. Key Features: ■30 watts (15W+15W) of natural, stereo acoustic sound through twin speakers ■Runs on AC power or eight AA batteries (accepts rechargeable NiMH types) ■Dual-channel configuration: Guitar and Mic/Line channel ■Reverb, chorus, and ambience effects (Ambience adds spatial, 3D-type depth to the sound) ■Phrase Looper with 40 seconds of record time ■Stereo AUX input (connect MP3/CD players, etc), headphone output ■Anti-feedback function ■Built-in tilt-back stand ■Removable battery cartridge for easy battery replacement Ad ID:

Denon DRA-F100 Receiver and DCD-F100 CDP, VGC, FWO

Denon DRA-F100 Receiver and DCD-F100 CD Player - VGC and FWO Denon DRA-F100 - AM/FM Stereo Receiver Specifications: Tuning range: FM, MW Power output: 30 watts per channel into 4? (stereo) Dimensions: 270 x 84 x 289mm Weight: 4.1kg Denon DCD-F100 - Compact Disc Player Specifications: Disc format: CD Frequency response: 20Hz to 20kHz Dimensions: 270 x 84 x 264mm Weight: 2.7kg Great sounding, highly regarded, compact (midi) system. Happy to demonstrate Read More

Denon DRA-F100 Receiver and DCD-F100 CD Player - VGC, FWO

Denon DRA-F100 Receiver and DCD-F100 CD Player - VGC and FWO Denon DRA-F100 - AM/FM Stereo Receiver Specifications: Tuning range: FM, MW Power output: 30 watts per channel into 4Ω (stereo) Dimensions: 270 x 84 x 289mm Weight: 4.1kg Denon DCD-F100 - Compact Disc Player Specifications: Disc format: CD Frequency response: 20Hz to 20kHz Dimensions: 270 x 84 x 264mm Weight: 2.7kg Great sounding, highly regarded, compact (midi) system. Happy to demonstrate

Sony TC-200 Vintage Reel-to-Reel c/w Speakers – VGC, FWO

Sony TC-200 Vintage Reel-to-Reel c/w Speakers – VGC, FWO Compact 7" R2R with separate speakers that form a small portable 'suitcase' when in the closed position. First manufactured in . Refer to YouTube that has numerous videos demonstrating the unit. Specifications: Track system: 4-track, 2-channel, stereo/monaural system Reel size: up to 7 inch reel Tape speeds: ips Wow and flutter: ips) Frequency response: 50Hz to 14kHz (7 1/2 ips) Signal to Noise Ratio: 46dB Output power: 1.5 watts Semiconductors: 2 x 2SD64, 2 x 1T22G, 1 x 1S125 Valve complement: 2 x x 30M-P23 Dimensions: 404 x 380 x 227mm Weight: 12kg Year: Read More

Contact

• Next →