3dfins 70 xds fcs large green

  3DFins - 7.0 XDS (FCS) - Large - Green

3DFins - 7.0 XDS (FCS) - Large - Green Stripe The 7.0 template is used by Kerrzy more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  Artist designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  Large 75kg up (165lb) Height: 4.64" Base:  4.72" Rake:  35 degrees  

  3DFins - 7.0 XDS (FCS) - Green - Large -

3DFins - 7.0 XDS (FCS) - Green - Large The 7.0 template is used by Josh Kerr (Kerrzy) more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  75kg up (165lb) Height 4.64" Base:  4.72" Rake:  35 degrees      

  3DFins - 6.0 XDS (FCS) - Yellow -

3DFins - 6.0 XDS (FCS) - Yellow - Medium/Large The 6.0 is one of the most popular templates ever made. With less rake, wide-base, this Dimpled template gives maximum drive, allowing for extreme turns at very high speeds. Sharp bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs. 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  kg (lb) Fin size Height:  4.56" Base:  4.34" Rake:  32 degrees      

  3DFins - 4.0 XDS (FCS) - Small - Purple -

3DFins - 4.0 XDS (FCS) - Small - Purple The 4.0 is our step-up Grom/Manchild fin: just what a grom on the grow needs.   These fins are super responsive, the dimples combined with extra base give insane drive with the slightest push on the pedal. The reduced area at the tip allows for slick release so Manchild can do whatever he wants to do. This fin is also great for bigger surfers wanting some fun in smaller waves.  3DFINS unique embedded graphic process takes Fin design to the next level.   Twin Tab (FCS base compatible)   Material: Fibreglass/Hexcore Construction   Surfer Size:  kg ( lb) Height:  4.42" Base:  4.29" Rake:  32.4 degrees      

  3DFins - 5.0 XDS (FCS) - Medium - Pink -

3DFins - 5.0 XDS (FCS) - Medium - Pink This medium sized template is the ultimate all-rounder: Effective for all styles of surfing in just about any set of conditions, these dimpled fins are high performance, with the flat inner face allowing for more control at extreme speeds. Go hard on the on the 5.0.  3DFINS unique embedded graphic process takes Fin Art to the next level. Fibreglass/Hexcore Construction Material: Hexcore/Fibreglass Surfer Size:  kg (lb) Fin size Height:  4.55" Base:  4.37" Rake:  32.8 degrees  

  3DFins - 7.0 XDS (Future) - Green - Large -

3DFins - 7.0 XDS (Future) - Green - Large The 7.0 template is used by Josh Kerr (Kerrzy) more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  75kg up (165lb) Height 4.64" Base:  4.72" Rake:  35 degrees      

  3DFins - 7.0 XDS (Future) - Large - Green

3DFins - 7.0 XDS (Future) - Large - Green Stripe The 7.0 template is used by Kerrzy more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  Artist designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  Large 75kg up (165lb) Height: 4.64" Base:  4.72" Rake:  35 degrees  

  3DFins - 7.0 XCS Lite (FCS) - Large - Blue

3DFins - 7.0 XCS Lite (FCS) - Large - Blue   The XCS LITE 7.0 creates extra drive and speed for both heavier surfers and those that simply want more "fin" in the water when it counts. The extra speed generated by the dimples is really noticable straight after takeoff and through turns especially when surfing softer, slower waves. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new bright colours they look insane in and out of the water. MOONRAKERR 7.0 recommended for big waves or those of use who are well past our grommet weight. The Full Base system is fully compatible with Future fin boxes. Optimum weight ranges: 75kg+ (165lb+) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Sweep:  35.0° Foil:  IFT  

  3DFins - 6.0 XDS (Future) - Yellow -

3DFins - 6.0 XDS (Future) - Yellow - Medium/Large The 6.0 is one of the most popular templates ever made. With less rake, wide-base, this Dimpled template gives maximum drive, allowing for extreme turns at very high speeds. Sharp bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs. 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  kg (lb) Fin size Height:  4.56" Base:  4.34" Rake:  32 degrees      

  3DFins - 4.0 XDS (Future) - Small - Purple

3DFins - 4.0 XDS (Future) - Small - Purple The 4.0 is our step-up Grom/Manchild fin: just what a grom on the grow needs. These fins are super responsive, the dimples combined with extra base give insane drive with the slightest push on the pedal. The reduced area at the tip allows for slick release so Manchild can do whatever he wants to do. This fin is also great for bigger surfers wanting some fun in smaller waves.  3DFINS unique embedded graphic process takes Fin design to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  kg ( lb) Height:  4.42" Base:  4.29" Rake:  32.4 degrees      

  3DFins - 5.0 XDS (Future) - Medium - Pink -

3DFins - 5.0 XDS (Future) - Medium - Pink This medium sized template is the ultimate all-rounder: Effective for all styles of surfing in just about any set of conditions, these dimpled fins are high performance, with the flat inner face allowing for more control at extreme speeds. Go hard on the on the 5.0.  3DFINS unique embedded graphic process takes Fin Art to the next level. Full Base (Future fin base compatible) Fibreglass/Hexcore Construction Material: Hexcore/Fibreglass Surfer Size:  kg (lb) Fin size Height:  4.55" Base:  4.37" Rake:  32.8 degrees  

  3DFins - XCS Quad Lite (FCS) - Medium -

3DFins - XCS Quad Lite (FCS) - Medium - Green/Orange If you're deep in the tube and the light's fading, these just might be the difference between making it or taking it.  Adding dimple technology to a quad set up adds even more drive, increases speed down the line and improves manoeuvrability.  Our quad fins are XS at the back and 5.0 at the front. Great for all conditions, especially deep tubes. Optimum weight ranges: Medium 60kg and up. The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Front Fins: MOONRAKERR 5.0: Base:  mm Height:  mm Area:  mm² Sweep:  32.0° Foil:  IFT Rear Fins: MOONRAKERR XS: Base:  mm Height:  mm Area:  mm² Sweep:  32.3° Foil:  IFT    

  3DFins - Skull Duggery (FCS) - Josh Kerr

3DFins - Skull Duggery - Josh Kerr Moonrakerr (FCS Base) You Want drive? You got it! This fin is a must have in your quiver.  The combination of the swept back rake combined with Dimple Technology, creates incredible drive, quick release through turns and sky burning potential. desination acceleration! The Dimple Technology enhances this already very fast design.  You will find these extremely fast into and out of turns, super smooth through transitions and when you want to accelerate these will respond fast.  Suitable for vast majority of conditions. Size: XS 5.0 / Medium 7.0 / Large Base: mm) mm)  mm) Height: mm) mm) mm) Sweep: 32 Degrees 32 Degrees 33 Degrees Foil: Slight Inner Foil Slight Inner Foil Flat Foil Weight: kgs kgs kgs

  3DFins - XCS Lite (FCS) - X-Small - Orange

3DFins - XCS Lite (FCS) - X-Small - Orange The XCS LITE XS is the grommet dream. It's super fast, super responsive and super fun. Perfect to add a bit more speed, power and control to your turns. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new bright colors they look insane in and out of the water. Optimum weight ranges: kg (lb) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Area:  mm² Sweep:  32.0° Foil:  IFT  

  3DFins - 5.0 XCS Lite (FCS) - Medium -

3DFins - 5.0 XCS Lite (FCS) - Medium - Green The 5.0 has a lively feel and is the most popular of our XCS LITE range. The dimples give an immediate burst of speed straight after take off, and well and into and out of turns. The unique flex patterns make for smooth transitions and good control. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new Bright colors they look insane in and out of the water. MOONRAKERR 5.0 is recommended for big waves or those of use who are well past our grommet weight. Optimum weight ranges: kg (lb) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Area:  mm² Sweep:  32.5° Foil:  IFT  

  FCS II AM Thruster Set In Large From FCS -

FCS II AM Thruster Set In Large From FCS - Al Merrick Shaper Template Fin in Sporting Goods, Surfing, Surfboards

  3DFins - 7.0 XCS Lite (Future) - Large -

3DFins - 7.0 XCS Lite (Future) - Large - Blue   The XCS LITE 7.0 creates extra drive and speed for both heavier surfers and those that simply want more "fin" in the water when it counts. The extra speed generated by the dimples is really noticable straight after takeoff and through turns especially when surfing softer, slower waves. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new bright colours they look insane in and out of the water. MOONRAKERR 7.0 recommended for big waves or those of use who are well past our grommet weight. The Full Base system is fully compatible with Future fin boxes. Optimum weight ranges: 75kg+ (165lb+) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Sweep:  35.0° Foil:  IFT  

Large 86"x 70" Debenhams red/green Tartan table cloth...

Large 86"x 70" Debenhams red/green Tartan table cloth, Ideal for Burns Night £, Crowborough,.

  Fcs Fcs II Reactor Pc Carbon Medium Tri Fin

Fcs Fcs II Reactor Pc Carbon Medium Tri Fin Set Surfboard Fins in Sporting Goods, Surfing, Surfboards

  FCS II JF PG Tri Set In Medium From FCS -

FCS II JF PG Tri Set In Medium From FCS - Jeremy Flores Signature Surfboard Fin in Sporting Goods, Surfing, Surfboards

FCS fins - Nexus (Large)

Set of 3 Nexus FCS fins Size L Used, one is slightly damaged on edge (pls see photo). £ 40 Cash on collection from London W3. Tks Ad ID: Delivery Service Consumer Credit

Beautiful Green Amethyst Vintage 925 Solid Silver Large Ring Size 6.75. SALE £40 each or 2 for £70!!

Beautiful Green Amethyst Vintage 925 Solid Silver Large Ring Size 6.75. SALE £40 each or 2 for £70!! Check out my other items.. Ad ID: Delivery Service Consumer Credit

Fcs surfboard fins large and performance glass

Unused fibreglass performance fcs fins. PG7's peformance glass size large. Perfect for anyone looking for a fin you can rely on in any waves for heavier riders or for lighter riders but in bigger surf. Ad ID: Delivery Service Consumer Credit

Surfboard Fins FCS Compatible Green or Blue G5 Set of 3 Great Quality Surf Fin Euro fins

Blue or Green FCS fit fins brand new, G5 template, great quality fins at a great cost, nylon composite so tough yet flexible fins. Listing is for set of 3 fins. FCS M5/G5 Medium Fin Size: Center Base: 4.37 in. 111 mm Center Depth: 4.55 in. 115 mm Surface Area: in.² mm² Sweep: 33° Foil flat outers, centre. Fixed price on all fins £11 Can be delivered to UK address for £1 Please see my other items for more surf gear. Any questions feel free to ask. Ad ID: Delivery Service Consumer Credit

Surfboard Fins FCS Compatible Green or Blue G5 Set of 3 Great Quality Surf Fin Euro fins

Blue or Green FCS fit fins brand new, G5 template, great quality fins at a great cost, nylon composite so tough yet flexible fins. Listing is for set of 3 fins. FCS M5/G5 Medium Fin Size: Center Base: 4.37 in. 111 mm Center Depth: 4.55 in. 115 mm Surface Area: in.² mm² Sweep: 33° Fixed price on all fins £11 Can be delivered to UK address for £1 Any questions feel free to ask. Ad ID: Delivery Service Consumer Credit

Contact

• Next →