3dfins xcs quad lite fcs medium

   3DFins - XCS Quad Lite (FCS) - Medium -

  3DFins - XCS Quad Lite (FCS) - Medium -

3DFins - XCS Quad Lite (FCS) - Medium - Green/Orange If you're deep in the tube and the light's fading, these just might be the difference between making it or taking it.  Adding dimple technology to a quad set up adds even more drive, increases speed down the line and improves manoeuvrability.  Our quad fins are XS at the back and 5.0 at the front. Great for all conditions, especially deep tubes. Optimum weight ranges: Medium 60kg and up. The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Front Fins: MOONRAKERR 5.0: Base:  mm Height:  mm Area:  mm² Sweep:  32.0° Foil:  IFT Rear Fins: MOONRAKERR XS: Base:  mm Height:  mm Area:  mm² Sweep:  32.3° Foil:  IFT    

   3DFins - 5.0 XCS Lite (FCS) - Medium -

  3DFins - 5.0 XCS Lite (FCS) - Medium -

3DFins - 5.0 XCS Lite (FCS) - Medium - Green The 5.0 has a lively feel and is the most popular of our XCS LITE range. The dimples give an immediate burst of speed straight after take off, and well and into and out of turns. The unique flex patterns make for smooth transitions and good control. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new Bright colors they look insane in and out of the water. MOONRAKERR 5.0 is recommended for big waves or those of use who are well past our grommet weight. Optimum weight ranges: kg (lb) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Area:  mm² Sweep:  32.5° Foil:  IFT  

Related products 3dfins xcs quad lite fcs medium :   3DFins - 5.0 XCS Lite (FCS) - Medium -
   3DFins - XCS Quad Lite (Future) - Medium -

  3DFins - XCS Quad Lite (Future) - Medium -

3DFins - XCS Quad Lite (Future) - Medium - Green/Orange If you're deep in the tube and the light's fading, these just might be the difference between making it or taking it.  Adding dimple technology to a quad set up adds even more drive, increases speed down the line and improves manoeuvrability.  Our quad fins are XS at the back and 5.0 at the front. Great for all conditions, especially deep tubes. Optimum weight ranges: Medium 60kg and up. The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. The Full Base system is fully compatible with Future fin boxes. Material: Composite Front Fins: MOONRAKERR 5.0: Base:  mm Height:  mm Area:  mm² Sweep:  32.0° Foil:  IFT Rear Fins: MOONRAKERR XS: Base:  mm Height:  mm Area:  mm² Sweep:  32.3° Foil:  IFT    

   3DFins - XCS Lite (FCS) - X-Small - Orange

  3DFins - XCS Lite (FCS) - X-Small - Orange

3DFins - XCS Lite (FCS) - X-Small - Orange The XCS LITE XS is the grommet dream. It's super fast, super responsive and super fun. Perfect to add a bit more speed, power and control to your turns. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new bright colors they look insane in and out of the water. Optimum weight ranges: kg (lb) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Area:  mm² Sweep:  32.0° Foil:  IFT  

Related products 3dfins xcs quad lite fcs medium :   3DFins - XCS Lite (FCS) - X-Small - Orange
   3DFins - 7.0 XCS Lite (FCS) - Large - Blue

  3DFins - 7.0 XCS Lite (FCS) - Large - Blue

3DFins - 7.0 XCS Lite (FCS) - Large - Blue   The XCS LITE 7.0 creates extra drive and speed for both heavier surfers and those that simply want more "fin" in the water when it counts. The extra speed generated by the dimples is really noticable straight after takeoff and through turns especially when surfing softer, slower waves. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new bright colours they look insane in and out of the water. MOONRAKERR 7.0 recommended for big waves or those of use who are well past our grommet weight. The Full Base system is fully compatible with Future fin boxes. Optimum weight ranges: 75kg+ (165lb+) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Sweep:  35.0° Foil:  IFT  

   3DFins - 5.0 XCS Lite (Future) - Medium -

  3DFins - 5.0 XCS Lite (Future) - Medium -

3DFins - 5.0 XCS Lite (Future) - Medium - Green The 5.0 has a lively feel and is the most popular of our XCS LITE range. The dimples give an immediate burst of speed straight after take off, and well and into and out of turns. The unique flex patterns make for smooth transitions and good control. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new Bright colors they look insane in and out of the water. MOONRAKERR 5.0 is recommended for big waves or those of use who are well past our grommet weight. Optimum weight ranges: kg (lb) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Area:  mm² Sweep:  32.5° Foil:  IFT  

Related products 3dfins xcs quad lite fcs medium :   3DFins - 5.0 XCS Lite (Future) - Medium -
   3DFins - XCS Lite (Future) - X-Small -

  3DFins - XCS Lite (Future) - X-Small -

3DFins - XCS Lite (Future) - X-Small - Orange The XCS LITE XS is the grommet dream. It's super fast, super responsive and super fun. Perfect to add a bit more speed, power and control to your turns. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new bright colors they look insane in and out of the water. Optimum weight ranges: kg (lb) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Area:  mm² Sweep:  32.0° Foil:  IFT  

   3DFins - 7.0 XCS Lite (Future) - Large -

  3DFins - 7.0 XCS Lite (Future) - Large -

3DFins - 7.0 XCS Lite (Future) - Large - Blue   The XCS LITE 7.0 creates extra drive and speed for both heavier surfers and those that simply want more "fin" in the water when it counts. The extra speed generated by the dimples is really noticable straight after takeoff and through turns especially when surfing softer, slower waves. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new bright colours they look insane in and out of the water. MOONRAKERR 7.0 recommended for big waves or those of use who are well past our grommet weight. The Full Base system is fully compatible with Future fin boxes. Optimum weight ranges: 75kg+ (165lb+) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Sweep:  35.0° Foil:  IFT  

Related products 3dfins xcs quad lite fcs medium :   3DFins - 7.0 XCS Lite (Future) - Large -
   3DFins - 5.0 XDS (FCS) - Medium - Pink -

  3DFins - 5.0 XDS (FCS) - Medium - Pink -

3DFins - 5.0 XDS (FCS) - Medium - Pink This medium sized template is the ultimate all-rounder: Effective for all styles of surfing in just about any set of conditions, these dimpled fins are high performance, with the flat inner face allowing for more control at extreme speeds. Go hard on the on the 5.0.  3DFINS unique embedded graphic process takes Fin Art to the next level. Fibreglass/Hexcore Construction Material: Hexcore/Fibreglass Surfer Size:  kg (lb) Fin size Height:  4.55" Base:  4.37" Rake:  32.8 degrees  

   FCS II AM PC MEDIUM TRI-QUAD

  FCS II AM PC MEDIUM TRI-QUAD

FCS II AM PC MEDIUM TRI-QUAD The FCS II AM Performance Core Medium Tri-Quad Set. Al Merrick's tri-quad set allows you to customise the performance of your surfboard. The thruster offers exceptional drive off the bottom and quick tail release, the quad set is perfect for barrel riding and drawn-out, smooth carves on the open wave face. Construction: Performance Core - The PC fin is designed to replicate the feeling of a traditional glassed-on or fibreglass fin with the bonus of a greatly reduced weight. The Resin Transfer Moulding process produces a lightweight and flexible fin for a smooth feel and impressive aesthetic. PLEASE NOTE: These FCS II fins are NOT compatible with the original FCS and FCS Fusion fin plugs. Name - The FCS II AM Performance Core Medium Tri-Quad Five Fin Set Construction - Performance Core Base - 116mm Depth - 115mm Area - mm Sweep - 36.6 degrees Colour - Orange READ 

Related products 3dfins xcs quad lite fcs medium :   FCS II AM PC MEDIUM TRI-QUAD
   3DFins - Skull Duggery (FCS) - Josh Kerr

  3DFins - Skull Duggery (FCS) - Josh Kerr

3DFins - Skull Duggery - Josh Kerr Moonrakerr (FCS Base) You Want drive? You got it! This fin is a must have in your quiver.  The combination of the swept back rake combined with Dimple Technology, creates incredible drive, quick release through turns and sky burning potential. desination acceleration! The Dimple Technology enhances this already very fast design.  You will find these extremely fast into and out of turns, super smooth through transitions and when you want to accelerate these will respond fast.  Suitable for vast majority of conditions. Size: XS 5.0 / Medium 7.0 / Large Base: mm) mm)  mm) Height: mm) mm) mm) Sweep: 32 Degrees 32 Degrees 33 Degrees Foil: Slight Inner Foil Slight Inner Foil Flat Foil Weight: kgs kgs kgs

   3DFins - 6.0 XDS (FCS) - Yellow -

  3DFins - 6.0 XDS (FCS) - Yellow -

3DFins - 6.0 XDS (FCS) - Yellow - Medium/Large The 6.0 is one of the most popular templates ever made. With less rake, wide-base, this Dimpled template gives maximum drive, allowing for extreme turns at very high speeds. Sharp bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs. 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  kg (lb) Fin size Height:  4.56" Base:  4.34" Rake:  32 degrees      

Related products 3dfins xcs quad lite fcs medium :   3DFins - 6.0 XDS (FCS) - Yellow -
   3DFins - 7.0 XDS (FCS) - Large - Green

  3DFins - 7.0 XDS (FCS) - Large - Green

3DFins - 7.0 XDS (FCS) - Large - Green Stripe The 7.0 template is used by Kerrzy more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  Artist designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  Large 75kg up (165lb) Height: 4.64" Base:  4.72" Rake:  35 degrees  

   3DFins - 7.0 XDS (FCS) - Green - Large -

  3DFins - 7.0 XDS (FCS) - Green - Large -

3DFins - 7.0 XDS (FCS) - Green - Large The 7.0 template is used by Josh Kerr (Kerrzy) more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  75kg up (165lb) Height 4.64" Base:  4.72" Rake:  35 degrees      

Related products 3dfins xcs quad lite fcs medium :   3DFins - 7.0 XDS (FCS) - Green - Large -
   3DFins - 4.0 XDS (FCS) - Small - Purple -

  3DFins - 4.0 XDS (FCS) - Small - Purple -

3DFins - 4.0 XDS (FCS) - Small - Purple The 4.0 is our step-up Grom/Manchild fin: just what a grom on the grow needs.   These fins are super responsive, the dimples combined with extra base give insane drive with the slightest push on the pedal. The reduced area at the tip allows for slick release so Manchild can do whatever he wants to do. This fin is also great for bigger surfers wanting some fun in smaller waves.  3DFINS unique embedded graphic process takes Fin design to the next level.   Twin Tab (FCS base compatible)   Material: Fibreglass/Hexcore Construction   Surfer Size:  kg ( lb) Height:  4.42" Base:  4.29" Rake:  32.4 degrees      

   Fcs Fcs II Reactor Pc Carbon Medium Tri Fin

  Fcs Fcs II Reactor Pc Carbon Medium Tri Fin

Fcs Fcs II Reactor Pc Carbon Medium Tri Fin Set Surfboard Fins in Sporting Goods, Surfing, Surfboards

Related products 3dfins xcs quad lite fcs medium :   Fcs Fcs II Reactor Pc Carbon Medium Tri Fin
   FCS II JF PG Tri Set In Medium From FCS -

  FCS II JF PG Tri Set In Medium From FCS -

FCS II JF PG Tri Set In Medium From FCS - Jeremy Flores Signature Surfboard Fin in Sporting Goods, Surfing, Surfboards

Rockport xcs jacket medium adult

Rockport xcs jacket medium adult

Mens rockport xcs jacket medium adult in black fab condition. Ad ID: Delivery Services Consumer Credit

Related products 3dfins xcs quad lite fcs medium : Rockport xcs jacket medium adult
   3DFins - 5.0 XDS (Future) - Medium - Pink -

  3DFins - 5.0 XDS (Future) - Medium - Pink -

3DFins - 5.0 XDS (Future) - Medium - Pink This medium sized template is the ultimate all-rounder: Effective for all styles of surfing in just about any set of conditions, these dimpled fins are high performance, with the flat inner face allowing for more control at extreme speeds. Go hard on the on the 5.0.  3DFINS unique embedded graphic process takes Fin Art to the next level. Full Base (Future fin base compatible) Fibreglass/Hexcore Construction Material: Hexcore/Fibreglass Surfer Size:  kg (lb) Fin size Height:  4.55" Base:  4.37" Rake:  32.8 degrees  

Komunity Slater Fcs fit quad fins in RTM

Komunity Slater Fcs fit quad fins in RTM

Komunity Fcs Quad fins Slater 3.1's in super lightweight RTM technology. Fairly large quad fin set. Good for dialling up in size or for heavier surfers. Ad ID: Delivery Service Consumer Credit

Related products 3dfins xcs quad lite fcs medium : Komunity Slater Fcs fit quad fins in RTM
Fcs 1 fins yu medium size thrusters

Fcs 1 fins yu medium size thrusters

FCS 1 FINS YU SHAPE MEDIUM USED BUT PERFECTLY GOOD FIN £10 Ad ID:

   FCS II AM Thruster Set In Large From FCS -

  FCS II AM Thruster Set In Large From FCS -

FCS II AM Thruster Set In Large From FCS - Al Merrick Shaper Template Fin in Sporting Goods, Surfing, Surfboards

Related products 3dfins xcs quad lite fcs medium :   FCS II AM Thruster Set In Large From FCS -
   FCS 'All I Do Is Surf' Medium Surfing

  FCS 'All I Do Is Surf' Medium Surfing

BRAND NEW SURF STICKER £0.50 UK MAINLAND DELIVERY 6" Long x 1.5" High   WE ARE A REAL SHOP WITH HELPFULL STAFF AT THE END OF THE PHONE. CALL THE SHOP: FOR MORE INFORMATION PLEASE VISIT THE BILBO SURF SHOP WEBSITE !  

   FCS 'JS-1' Glass Flex Tri Fins Medium

  FCS 'JS-1' Glass Flex Tri Fins Medium

BRAND NEW FCS 'JS - 1' GLASS FLEX TRI FINS MEDIUM £2.50 UK MAINLAND DELIVERY   Developed for world class shaper, Jason Stevenson, the JS-1 is the fin preferred by JS's team of elite surfers, combining a balanced mid-sized template. Glass Flex has been formulated to replicate the flex and memory properties of hand layered fibreglass. Its advantages over other composite fin materials include stiffness, a more positive flex pattern (nice tip flex, little base flex) and remarkable flex memory. The precision of the injection moulding process ensures the highest accuracy in geometry in each fin produced     WE ARE A REAL SHOP WITH HELPFULL STAFF AT THE END OF THE PHONE. CALL THE SHOP: FOR MORE INFORMATION PLEASE VISIT THE BILBO SURF SHOP WEBSITE ! 

Related products 3dfins xcs quad lite fcs medium :   FCS 'JS-1' Glass Flex Tri Fins Medium
   FCS II GOODS PG Tri Set In Medium - CJ &

  FCS II GOODS PG Tri Set In Medium - CJ &

FCS II GOODS PG Tri Set In Medium - CJ & Damien Hobgoods Athlete Template in Sporting Goods, Surfing, Surfboards

Contact