3dfins 60 xds future yellow

  3DFins - 6.0 XDS (Future) - Yellow -

3DFins - 6.0 XDS (Future) - Yellow - Medium/Large The 6.0 is one of the most popular templates ever made. With less rake, wide-base, this Dimpled template gives maximum drive, allowing for extreme turns at very high speeds. Sharp bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs. 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  kg (lb) Fin size Height:  4.56" Base:  4.34" Rake:  32 degrees      

  3DFins - 7.0 XDS (Future) - Large - Green

3DFins - 7.0 XDS (Future) - Large - Green Stripe The 7.0 template is used by Kerrzy more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  Artist designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  Large 75kg up (165lb) Height: 4.64" Base:  4.72" Rake:  35 degrees  

  3DFins - 7.0 XDS (Future) - Green - Large -

3DFins - 7.0 XDS (Future) - Green - Large The 7.0 template is used by Josh Kerr (Kerrzy) more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  75kg up (165lb) Height 4.64" Base:  4.72" Rake:  35 degrees      

  3DFins - 5.0 XDS (Future) - Medium - Pink -

3DFins - 5.0 XDS (Future) - Medium - Pink This medium sized template is the ultimate all-rounder: Effective for all styles of surfing in just about any set of conditions, these dimpled fins are high performance, with the flat inner face allowing for more control at extreme speeds. Go hard on the on the 5.0.  3DFINS unique embedded graphic process takes Fin Art to the next level. Full Base (Future fin base compatible) Fibreglass/Hexcore Construction Material: Hexcore/Fibreglass Surfer Size:  kg (lb) Fin size Height:  4.55" Base:  4.37" Rake:  32.8 degrees  

  3DFins - 4.0 XDS (Future) - Small - Purple

3DFins - 4.0 XDS (Future) - Small - Purple The 4.0 is our step-up Grom/Manchild fin: just what a grom on the grow needs. These fins are super responsive, the dimples combined with extra base give insane drive with the slightest push on the pedal. The reduced area at the tip allows for slick release so Manchild can do whatever he wants to do. This fin is also great for bigger surfers wanting some fun in smaller waves.  3DFINS unique embedded graphic process takes Fin design to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  kg ( lb) Height:  4.42" Base:  4.29" Rake:  32.4 degrees      

  3DFins - 6.0 XDS (FCS) - Yellow -

3DFins - 6.0 XDS (FCS) - Yellow - Medium/Large The 6.0 is one of the most popular templates ever made. With less rake, wide-base, this Dimpled template gives maximum drive, allowing for extreme turns at very high speeds. Sharp bottoms to vertical launches are made easy when you ride this fin. Give this a go in beachies with grunt or some slabs. 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  kg (lb) Fin size Height:  4.56" Base:  4.34" Rake:  32 degrees      

  3DFins - 7.0 XDS (FCS) - Green - Large -

3DFins - 7.0 XDS (FCS) - Green - Large The 7.0 template is used by Josh Kerr (Kerrzy) more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  75kg up (165lb) Height 4.64" Base:  4.72" Rake:  35 degrees      

  3DFins - 4.0 XDS (FCS) - Small - Purple -

3DFins - 4.0 XDS (FCS) - Small - Purple The 4.0 is our step-up Grom/Manchild fin: just what a grom on the grow needs.   These fins are super responsive, the dimples combined with extra base give insane drive with the slightest push on the pedal. The reduced area at the tip allows for slick release so Manchild can do whatever he wants to do. This fin is also great for bigger surfers wanting some fun in smaller waves.  3DFINS unique embedded graphic process takes Fin design to the next level.   Twin Tab (FCS base compatible)   Material: Fibreglass/Hexcore Construction   Surfer Size:  kg ( lb) Height:  4.42" Base:  4.29" Rake:  32.4 degrees      

  3DFins - 5.0 XDS (FCS) - Medium - Pink -

3DFins - 5.0 XDS (FCS) - Medium - Pink This medium sized template is the ultimate all-rounder: Effective for all styles of surfing in just about any set of conditions, these dimpled fins are high performance, with the flat inner face allowing for more control at extreme speeds. Go hard on the on the 5.0.  3DFINS unique embedded graphic process takes Fin Art to the next level. Fibreglass/Hexcore Construction Material: Hexcore/Fibreglass Surfer Size:  kg (lb) Fin size Height:  4.55" Base:  4.37" Rake:  32.8 degrees  

  3DFins - 7.0 XDS (FCS) - Large - Green

3DFins - 7.0 XDS (FCS) - Large - Green Stripe The 7.0 template is used by Kerrzy more than any other. Our dialed in foils, extra rake, wide base and reduced area at the tip allow for drawn out bottom turns, swooping cut backs and down-the-line speed required for long point breaks or big open faces. This fin setup is for anyone who likes to push hard on the tail and give it some rail.  Artist designed graphics with 3DFINS unique embedded graphic process takes Fin Art to the next level. Material: Fibreglass/Hexcore Construction Surfer Size:  Large 75kg up (165lb) Height: 4.64" Base:  4.72" Rake:  35 degrees  

  3DFins - XCS Quad Lite (Future) - Medium -

3DFins - XCS Quad Lite (Future) - Medium - Green/Orange If you're deep in the tube and the light's fading, these just might be the difference between making it or taking it.  Adding dimple technology to a quad set up adds even more drive, increases speed down the line and improves manoeuvrability.  Our quad fins are XS at the back and 5.0 at the front. Great for all conditions, especially deep tubes. Optimum weight ranges: Medium 60kg and up. The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. The Full Base system is fully compatible with Future fin boxes. Material: Composite Front Fins: MOONRAKERR 5.0: Base:  mm Height:  mm Area:  mm² Sweep:  32.0° Foil:  IFT Rear Fins: MOONRAKERR XS: Base:  mm Height:  mm Area:  mm² Sweep:  32.3° Foil:  IFT    

  3DFins - Skull Duggery (Future) - Josh Kerr

3DFins - Skull Duggery - Josh Kerr Moonrakerr (Future Base) You Want drive? You got it! This fin is a must have in your quiver.  The combination of the swept back rake combined with Dimple Technology, creates incredible drive, quick release through turns and sky burning potential. desination acceleration! The Dimple Technology enhances this already very fast design.  You will find these extremely fast into and out of turns, super smooth through transitions and when you want to accelerate these will respond fast.  Suitable for vast majority of conditions. Size: XS 5.0 / Medium 7.0 / Large Base: mm) mm)  mm) Height: mm) mm) mm) Sweep: 32 Degrees 32 Degrees 33 Degrees Foil: Slight Inner Foil Slight Inner Foil Flat Foil Weight: kgs kgs kgs

  3DFins - XCS Lite (Future) - X-Small -

3DFins - XCS Lite (Future) - X-Small - Orange The XCS LITE XS is the grommet dream. It's super fast, super responsive and super fun. Perfect to add a bit more speed, power and control to your turns. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new bright colors they look insane in and out of the water. Optimum weight ranges: kg (lb) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Area:  mm² Sweep:  32.0° Foil:  IFT  

  3DFins - 7.0 XCS Lite (Future) - Large -

3DFins - 7.0 XCS Lite (Future) - Large - Blue   The XCS LITE 7.0 creates extra drive and speed for both heavier surfers and those that simply want more "fin" in the water when it counts. The extra speed generated by the dimples is really noticable straight after takeoff and through turns especially when surfing softer, slower waves. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new bright colours they look insane in and out of the water. MOONRAKERR 7.0 recommended for big waves or those of use who are well past our grommet weight. The Full Base system is fully compatible with Future fin boxes. Optimum weight ranges: 75kg+ (165lb+) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Sweep:  35.0° Foil:  IFT  

  3DFins - 5.0 XCS Lite (Future) - Medium -

3DFins - 5.0 XCS Lite (Future) - Medium - Green The 5.0 has a lively feel and is the most popular of our XCS LITE range. The dimples give an immediate burst of speed straight after take off, and well and into and out of turns. The unique flex patterns make for smooth transitions and good control. They're also super smooth through transitions.  The dimples don't just increase speed, they have great hold in bottom turns with mad release off the top.  Suitable for the majority of conditions, with the new Bright colors they look insane in and out of the water. MOONRAKERR 5.0 is recommended for big waves or those of use who are well past our grommet weight. Optimum weight ranges: kg (lb) The MOONRAKERR™ is Josh Kerr's signature fin, with patented dimple technology.  It has been designed to give extra speed and drive, both down the line and through critical turns.  Independent tests have proven the dimples on the MOONRAKERR surf fin increase lift and drive by up to 15%.  This gives a surfer the ability to gain more speed.  And with more speed, comes the opportunity for more advanced manoeuvres. Material: Composite Base:  mm Height:  mm Area:  mm² Sweep:  32.5° Foil:  IFT  

  Future Fins - AM2 Hex - Yellow - Large -

Future Fins - AM2 Hex - Yellow - Large The AM2 is our Larger rider template by Al Merrick. With a full base and large surface area, this fin means power. Size: Large Height:  4.79 in,     cm Base:     4.70 in,     cm Area:    sq in, sq cm Foil:  Natural Feel For solid, controlled ride. Predictable release for high performance surfing. Take your surfing beyond glass-ons with Futures' next progression. Techflex was designed to stiffen up the fin in the right places with strategically placed carbon in the base and tip. This activates flex in the middle of the fin, creating maximum lift for those who prefer flat sided fins. The Tech flex is perfect for experienced surfers with a powerful approach or any level of surfer in powerful waves. Material: Honeycomb/Fibreglass  

BACK TO THE FUTURE MINIMATES TIME MACHINE, FUTURE DOC BROWN

THIS BACK TO THE FUTURE MINIMATES TIME MACHINE WITH FUTURE DOC BROWN IS IN VERY GOOD CONDITION, resealed IN ORIGINAL BOX Read More

  Future Fins Surfboard Fin Key, FCS & Future

New and genuine product

Acer xds clubs and bag

Acer xds tour flex clubs excellent condition, sw pw iron 3 and5 wood.mitsushiba 3iron and driving iron.oglo sport golf bag.will sell seperate or as set £10 per club or 65 the lot Ad ID: Delivery Service Consumer Credit

Your Child's bright future is your future in Slough

Upcoming tuition academy being launched by elite academia and most experienced teachers at Slough on the 1st of December . Our team of teachers are specialists in entrance exams of all Grammer Schools and over a period of last 5 years 88% of our pupils got into different Grammer Schools in & around Slough. We are currently registering students for various classes and if you are interested in opting us for your young one then please leave your details with us via email provided on urgent basis. Please note that limited places are currently available in and will be allocated on first come first serve basis. Therefore your swift response to this advert could prove to be a key to your child's bright academic future. Please E-mail us or send us a text msg on and our dedicated team will get back to you on asap basis. Location: London, Slough, Berkshire

France - Servizi, blue and yellow 60 cents

Mint Never Hinged, the blue 60 cents has no gum, the yellow 60 cents has gum, both signed on the back. Read More

18 kt (.750) yellow gold chain - 60 cm

Material: 18 kt (.750) yellow goldWeight: 30 gMeasurements: 60 cm long x 0.4 cm wideCondition: second hand Please see the photos to form your own impression. Registered shipping with tracking. Read more

18 kt yellow gold necklace Length: 60 cm

Are you interested in this item?This item is up for auction at Catawiki. Please click on "respond to advert" (orange button) to get redirected to the Catawiki website. Catawiki’s goal is to make special objects universally available. Our weekly auctions feature thousands of unusual, rare, and exceptional objects you won’t find in just any store. Stunning necklace made of 18 kt yellow gold with satinised marine links. Lobster clasp.- Weight: 24.3 g.- Length: 60 cm.- Width: 0.5 cm.- Shipped with gift box and guarantee certificate.- International shipping with tracking.- Please pay close attention to the exact measurements described, as the photos have been enlarged to show the details more clearly! Read more

18 kt yellow gold chain - 60 cm long

18 kt yellow gold chain.Total weight: 9 g. Length: 60 cm.Shipping via courier.Store ref.: lot351 Read more

18 kt (.750) yellow gold chain - 60 cm

Material: 18 kt (.750) yellow goldWeight: 30 gMeasurements: 60 cm long x 0.4 cm wideCondition: second hand Please see the photos to form your own impression. Registered shipping with tracking. Read more

Contact

• Next →