wolfcraft wolfcraft quick action vise 100 mm

wolfcraft Wolfcraft Quick Action Vise 100 mm

This Wolfcraft quick action vise will securely and easily hold your workpiece for precise cutting, sanding, routing, sanding, etc. Thanks to the steel jaws with horizontal and vertical V-grooves, it can also easily clamp round objects. This vise is highly efficient and flexible with its quick adjuster. Read more

wolfcraft Wolfcraft Bevel and Mitre Box 100 mm

This Wolfcraft bevel and mitre box combines a bevel gauge and mitre box in one product and is ideal for making precise mitre cuts and measuring room angles between °. It is especially suitable for old buildings, thanks to its stepless angle adjustability between °. The measuring of room angles will be made a lot easier! This tool allows you to make automatic, error-free repeated cuts at the same angle, thanks to the integrated guide pins for the handsaw (mitre). There will be no more head scratching when setting the correct angle for the saw. The Wolfcraft bevel and mitre box is suitable for baseboards with a maximum height of 100 mm. Read more

wolfcraft Wolfcraft Hole Saw 60 mm with Hex Shank

This Wolfcraft hole saw is designed for drilling holes in wood, plywood, steel, non-ferrous heavy metals, plastic materials and gypsum plaster boards. This hole saw is directly useable and no separate mandrel is required. Made of bi-metal, the body of the hole saw is constructed from a special alloy and has high speed steel (HSS) teeth. The hole saw is delivered with a HSS centring drill with a diameter of 6 mm. Read more

wolfcraft Wolfcraft Hole Cutter for Water Taps 35 mm

This Wolfcraft hole punch is specifically designed for the installation of water taps in ?bre-reinforced plastic or sheet steel sinks. It is designed for simple and exact punching through sheet steel and stainless steel. With this high-quality hole punch, you can quickly and easily make a perfectly sized and shaped hole for your water tap. Read more

wolfcraft Wolfcraft Five Piece Profile Cutter Bit Set 8 mm

The Wolfcraft profile cutter bit set 8 mm is a set of 5-piece cutters with a 8 mm diameter and 40 mm length shank, designed to make your woodworking projects easier to approach! Each bit is constructed with a TCT tungsten carbide tip that stays sharp and it is long lasting! This set of 5 pieces router bits is developed for creating round profiles, and it comes organized in a plastic case for storage and easy transport. Delivery includes 1 semi-core box bit, 1 chamfering cutter, 2 round over bits and 1 S-profile bit. Read more

wolfcraft Wolfcraft Drill-powered Pump l/h S=6 mm

This S=6 mm drill-powered pump from Wolfcraft, with a maximum capacity of l/h, is suitable for emptying aquariums, ponds, boats, etc. As this pump is self priming, it is extremely easy to use. The metal casing makes this pump highly durable. It's fitted with a round drive shaft for use with a power drill. Delivery includes 1 pump. Read more

wolfcraft Wolfcraft Step Drill Bit 8 mm 4-20 HSS Grey

This Wolfcraft step drill bit is designed for precise drilling in stainless steel, sheet steel, nonferrous metals and plastic. This drill bit has a unique flute design, which ensures that it drills perfectly round holes into sheet metal. A fluted shank also prevents the drill bit from slipping into the chuck. It also has a self-centring point, which ensures that it will not walk and which eliminates the need for centre punching. The drill bit is made of high-speed steel. Delivery includes one step drill bit with a gradual diameter: mm. Read more

wolfcraft Wolfcraft Hand Saw 350 mm

The Wolfcraft hand saw is suitable for sawing plasterboard, plastic and wood and ideal for fitting door cut-outs during drywall installation. It is versatile thanks to 350 mm long blade with conically ground and hardened tooth tips. It has a durable, impact-resistant plastic handle for optimal working comfort. Read more

wolfcraft Wolfcraft Hand Truck TS 300 Metal 30 kg

The Wolfcraft folding hand truck TS 300 is an easy-to-use and compact transport system that will hardly take up any space in the boot. The trolley is lightweight and equipped with a special folding mechanism. The cart has a maximum load capacity of 30 kg. It is very compact at only 60 mm high when folded, and always ready to use. Read more

wolfcraft Wolfcraft Eight Piece Hobby Disc Set for Angle

This Wolfcraft hobby set contains includes all the necessary disks to give your workpieces perfectly polished finish. Delivery includes 1 backing pad (115 mm in diameter), 5 abrasive disc (115 mm in diameter, grit), 1 lambswool bonnet (140 mm in diameter), and 1 wire cup brush (60 mm in diameter). Read more

wolfcraft Wolfcraft Seven Piece Wood Finishing Set for

This Wolfcraft seven-piece wood finishing set has been specifically designed for cleaning and polishing wood, particularly wooden furniture. The set contains a burnishing wheel for polishing large surfaces, a flap wheel for sanding smaller surfaces and in corners, a sanding block with easy-fix abrasive pad fasteners on both sides and three easy-fix abrasive pads ( grit), and a steel wool pad (75 x 175 mm) for the final polish. Read more

wolfcraft Wolfcraft Lever Cutter for Laminate Flooring VNC

This Wolfcraft LC 100 lever cutter VNC 250 for laminate flooring is ideal for simple laminate flooring installation projects. It is suitable for the quick and clean cutting of laminate flooring boards with a thickness of up to 8 mm and a width of up to 210 mm. This lever cutter can also be used to make 90° fast and safe cuts with the limit stop, and is also an alternative to using power tools such as chop saws or jigsaws. It also has the advantage of dust-free and low-noise working. Easy cutting is ensured thanks to the special blade geometry. The lever cutter is very stable thanks to non-skid pads on the feet. Read more

wolfcraft Wolfcraft Pull Bar for Laminate Flooring

This tapered Wolfcraft pull bar will be indispensable when laying laminate flooring boards. It will come in particularly handy at room ends, where it can be used to a laminate flooring board under a door frame. It has 3 felt pads on the underside to protect the laminate flooring boards. Read more

wolfcraft Wolfcraft Five Piece Wire Brush Set

This Wolfcraft five-piece wire brush set is ideal for refurbishing weathered metal surfaces. Start your cleaning project by using the wire hand brush to remove dirt and the worst rust and paint flakes for a rough pre-cleaning. Then take the wire wheel brush to remove all the rust and paint from surfaces, or the wire spiral brush from the hard-to-reach corners. The burnishing wheel mop has been designed for removing dirt and polishing, and you can use the burnishing pad to apply the final polish. Delivery includes a wire hand brush, a wire wheel brush, a wire spiral brush, a burnishing wheel mop and a burnishing pad. Read more

wolfcraft Wolfcraft Manual Sanding Set for Plasterboards

This Wolfcraft manual sanding set will come in very handy on construction sites. This sanding set is specifically designed to hold and abrasive cloth sized 115 x 280 mm. With a composite handle, our sanding set is exceptionally comfortable to hold. Its serrated holders will keep the abrasive cloth in place safely and permanently. An abrasive cloth is included in delivery. Read more

wolfcraft Wolfcraft Forstner Drill Bit Steel

This Wolfcraft Forstner drill bit features a special cutting edge geometry, which allows it to produce an exceptionally clean hole with a virtually flat bottom. It has a 6.3 mm hexagonal shank for quick tool changes in bit holders. It is designed for drilling smooth, precise and dimensionally accurate holes and edge holes in all types of soft wood and plastic-coated chipboard. Read more

wolfcraft Wolfcraft Easy One-handed Clamp

This easy one-handed clamp from Wolfcraft is very easy to use, as it has just the basic functions of clamping and releasing. The clamp is always comfortable to hold and work with thanks to its ergonomically designed grip. It can also be effortlessly converted to the spreading function. The clamp is made of tempered steel and fibre-reinforced plastic and has a high clamping force of 90 kg. Read more

wolfcraft Wolfcraft Jig Saw Table

The Wolfcraft jigsaw table is a dependable accessory for precision jigsaw work. It has two steel clamps, with which it can be securely fastened to any workbench with a thickness of 60 mm maximum. As you will be conveniently cutting from the underside of the material, your saw will leave clean cut edges on the topside of the workpiece. Thanks to the parallel guide, the jigsaw table allows you to cut very precisely. Read more

wolfcraft Wolfcraft Telescopic Handle for Hand Sander 1.2-2

This Wolfcraft telescopic handle will come in handy when you need to do finishing work on the ceiling or other high places. It can be extended from 1.2 m to 2 m to give you a much bigger working range when using your hand sander or paint roller. Read more

wolfcraft 2 Quick Clamp Sets

The wolfcraft quick clamp set includes 2 pieces and is ideal for workbenches with a 20 mm bore. It's suitable for wolfcraft workbenches Master 200 , Master 600 , Master 700 , which you can find in our web shop (sku: ). Read more

wolfcraft Step Drill Bit 10 mm 8-35 mm HSS Grey

This wolfcraft step drill bit is designed for precise drilling in stainless steel, sheet steel, nonferrous metals and plastic. This drill bit has a unique flute design, which ensures that it drills perfectly round holes into sheet metal. A fluted shank also prevents the drill bit from slipping into the chuck. It also has a self-centring point, which ensures that it will not walk and which eliminates the need for centre punching. The drill bit is made of high-speed steel. Delivery includes one step drill bit with gradual diameter: mm. Read more

wolfcraft Hole Saw 112 mm Bi-Metal Red

This wolfcraft hole saw is designed for drilling holes in different materials, such as wood, plywood, steel, non-ferrous metals, plastic, and plasterboard. It is ready for use as it is equipped with a hexagonal adapter and a high-speed steel centring drill (6 mm in diameter) is included. The hole saw is made of bi-metal, with an alloyed tool steel body and hardened high-speed steel teeth. This wolfcraft hole saw has a diameter of 112 mm and a cutting depth of 40 mm. Read more

wolfcraft Hole Saw 152 mm Bi-Metal Red

This wolfcraft hole saw is designed for drilling holes in different materials, such as wood, plywood, steel, non-ferrous metals, plastic, and plasterboard. It is ready for use as it is equipped with a hexagonal adapter and a high-speed steel centring drill (6 mm in diameter) is included. The hole saw is made of bi-metal, with an alloyed tool steel body and hardened high-speed steel teeth. This wolfcraft hole saw has a diameter of 152 mm and a cutting depth of 40 mm. Read more

wolfcraft Hole Saw 121 mm Bi-Metal Red

This wolfcraft hole saw is designed for drilling holes in different materials, such as wood, plywood, steel, non-ferrous metals, plastic, and plasterboard. It is ready for use as it is equipped with a hexagonal adapter and a high-speed steel centring drill (6 mm in diameter) is included. The hole saw is made of bi-metal, with an alloyed tool steel body and hardened high-speed steel teeth. This wolfcraft hole saw has a diameter of 121 mm and a cutting depth of 40 mm. Read more

wolfcraft Lever Cutter for Laminate Flooring LC 100

This wolfcraft LC 100 lever cutter for laminate flooring is ideal for simple laminate flooring installation projects. It is suitable for the quick and clean cutting of laminate flooring boards with a thickness of up to 8 mm and a width of up to 210 mm. This lever cutter can also be used to make 90° fast and safe cuts with the limit stop, and is also an alternative to using power tools such as chop saws or jigsaws. It also has the advantage of dust-free and low-noise working. Easy cutting is ensured thanks to the special blade geometry. The lever cutter is very stable thanks to non-skid pads on the feet. Read more

Contact

• Next →