Lyrec PTR -1 Frida MK II, high serial number
It's a piece of ingeneering art. REC level and Eq are adjustable for each channel, for each speed for PB and for REC and Bias is adjustable for each channel/for each speed. Runs at three speeds: 3.75ips; 7.5ips; 15ips. With fully adjustable pitch control it also runs up to 48 ips. Display switchable between Real Time Counter and speed read out. Shows also pitch speed. Precisely. It has head wear protection in cue function. Takes 11,8 inch/30 cm reels. Real time counter w/two flags and goto, HX-Pro, IEC/NAB EQ, calibration in/out, fader start, editing board, remote controlled etc. Remote control pin code in manual. You can build you own very advanced remote from that. It is modular built with insert cards and is really a piece of engineering art. Control type: Full logic local and remote control Max Spool size: 11 inch platters or 300mm reels (Only 1 can be 300mm) Speeds: ips Metering: 12 LED PPM metering Varispeed: ±7% Speed acc: ±0.2% Wind time: 70 seconds to wind feet Reel type: Cine, NAB or DIN Tape tension: 80g Motors: 2 reel motors and one capstan motor Heads: 3, erase, record and playback Track configuration: stereo 1/2 track Frequency response: 30Hz - 28KHz @ 15ips, 30Hz – 20kHz @7.1/2 Bias Frequency: 300kHz Signal to Noise: Better than 65dB at 15ips Bias System: Dolby HX Pro Power: V Hz Weight: 12Kg Working position: Horizontal or Vertical Dimensions: 440 X 80 X 398mm (W X H X D)