Fishing Rod Turner
Fishing Rod Turner. I decided to put new rod guides on my fishing rod last year and needed a rod turner so I assembled some pieces of equipment and made one!!. Most items were sourced locally but 1 piece was purchased from USA. Assembled, it as about mm long and 200mm wide and 25mm thick. The controls are on/off switch, forward/reverse switch, speed control (either direction) and a system fuse., fused (via concealed socket) Input via a 12vdc PSU and it has 12vdc output. All housed in a surface 2gang socket box. There is a 'slipping clutch' assembly in case you want to 'pause' the rotation of the rod for inspection. There are various rod upstands which can be 'keyed' and seated on the base via wooden dowell pegs, and 1 stand-alone upstand (for additional support) to match up with varying lengths of rod. There are some thread holders and a sliding thread guide. Finally there are some Allen keys to assist with any adjustment to the clutch assembly. It is a solid ideal piece of equipment for carrying out any maintenance or full replacement of rod guides. It may even be ideal for a rod builder. It can be prepared for postal delivery at cost, but I could deliver locally for a small fee. Ad ID: Delivery Service Consumer Credit