Stainless Rigging Screws in VGC, 3 x 5/8" & 4 x 7/16", inc Toggles, Sta-Lok fittings & ss wires.
These rigging/bottle-screws are in perfect condition, always had toggles on, so never bent, and there was no failure of the rigging in any way. They are all fork-ended. The three 5/8" ones were for 8mm wire, the four 7/16" ones for 6mm wire, which the photos show as they are, still attached. New bottle screws of these sizes and quality are around £ and £"). Would prefer to sell together, but would consider splitting. Also available are appropriate sized Stay-Lok fittings on the wire ends, visible in the photos, for which new cones are available, together with the seven lengths of ss wire. I also have available an 8mm forestay which was a fixed length, so had no bottlescrew, just fittings at each end. All 8mm wires are 40ft (12m) plus, 6mm wires were lower stays, around half that length. Asking £95 ovno for the bottle screws with toggles, or £25 each for 5/8in ones, £10 each for 7/16in ones. Asking £110 ono for the lot including all wires and fittings. Buyer collects, I could deliver in Portsmouth/Southampton area or could be sent by carrier at cost, probably around £, assuming it is under 30kg. Ad ID: