sony fa30es integrated amplifier

Sony FA30ES Integrated Amplifier...

Sony FA30ES Integrated Amplifier, Sony FA30ES Integrated Amplifier. Supplied with remote control. In good working and cosmetic condition. See my other ads for the Sony CD Player (XA20ES) and Tuner (SA3ES) if you are looking to create a stack. Buyer must collect. £, Haywards Heath,.

Sony Integrated Stereo Amplifier +Sony 100W Speakers

I'm selling an as New Sony Integrated Stereo Amplifier, including a couple of Sony 100W speakers. This is a great set up for aspiring DJ's, the amp & speakers produce a fantastic sound, very loud! This equipment has been in storage for the last few years, very well packaged & everything has also been tested. All still in 100% working order. Will deliver to serious buyers.

SONY TA-FE 370 Integrated Amplifier

Sony TA-FE Integrated Amplifier(silver) Phono/CD/Tuner/Aux/2 Tape/ inputs,headphone socket,remote,excellent condition,manual.No box so pick-up preferred. (Surrey) Read More

SONY TA-FE 370 Integrated Amplifier

Sony TA-FE 370 Integrated Amplifier(silver) 2x70w per channel, Phono/CD/Tuner/Aux/2 Tape/ inputs,headphone socket,remote,excellent condition,manual.No box so pick-up preferred. (Surrey) Read More

Sony integrated Amplifier with remote control 160W in

Sony integrated amplifier with remote control. TA-FE Watts. Hz. 6 Inputs. Good condition and seldom used.

Sony integrated amplifier with remote control in Southampton

6 outputs. hz 160watts.

Vintage Sony TA- solid state stereo integrated amplifier

s Vintage Sony amp. 1 owner, past down from grandparents. Looking for an appreciative home.

SONY TA-F411R INTEGRATED STERO AMPLIFIER WITH REMOTE CONTROL

Selling my Sony amplifier together with original remote control all in working order. Super sound output but no longer needed. For specifications please see picture taken from the instructions manual included. Please feel free to ask any questions. Read more

JVC INTEGRATED AMPLIFIER

JVC INTEGRATED AMPLIFIER, NEW, 40watts per channel: 2 channels for 2 pairs of speakers, black, treble & bass controls, loudness control, inputs: phono/cd/ aux/ tuner/ tape, size: 92H/ 435W/ 252D mm, £35, ... (click to reveal full phone number), BRIGHTON

Cyrus 8 integrated amplifier

Cyrus 8 Integrated Amplifier Remote contol & Power cord included. Very Good condition. Reason for selling Upgrading. I would prefer collection. Can post if neccesary. Below is the techincal info 8 - Integrated Amplifier Given a top quality source the Cyrus 8 will paint a truly 3 dimensional acoustic picture with stunningly focused staging of images. Over the last 20 years Cyrus has learned to tune each section of the musical range accurately, so today the Cyrus 8 is able to faithfully recreate the subtle balance between length of single notes and tonal balance. For more than a year we continued to tune the Cyrus 8's sophisticated circuitry until we are satisfied that important low level musical information is transferred accurately to the listener. Only once this is correctly balanced can the amp provide the precise sense of timing and rhythm upon which much of music's magic is based. Accurate interplay between musicians is based on subliminal information and is absolutely vital to the overall success of the system performance. It is this ability of Cyrus to finely balance circuitry throughout our systems that makes our components sing.  The Cyrus 8 was we believe a significant step forward in integrated amplifier design and will form a valuable and long-lasting cornerstone for your system.   Further Information The previous Cyrus 7 amplifier carved an enviable reputation in our industry for delivering first-class sound quality from within its compact, stylish Cyrus chassis. The ‘impossible’ brief for the Cyrus 8 amplifier was to take this formula even further, with more output power, higher output current, better power supply rejection, improved PSX-R upgrade and more sophistication in the control system. In the process of upgrading these performance ideals it was also appropriate to review the sound performance of the amplifier to establish the sound signature of the ‘8 series’ of products. Higher output power - They said it couldn’t be done! The Cyrus 8 delivered the most power yet from our chassis. Despite the power amplifier delivering a true 70W+70W RMS power into 8 ohms, no compromises have been made elsewhere in the amplifer. True to the Cyrus tradition the chassis also houses a traditionally designed power supply featuring an oversize 330VA power transformer and extra-large electrolytic reservoir capacitors.  The performance gains in the Cyrus 8 have been possible through new higher efficiency power amplifier circuitry, new thermal management techniques and a higher current output stage. High efficiency power amplifier – Dual charge pumps and linear post-regulators increase the voltage and stabilise the power supply available for the voltage amplifier stage, eliminating any trace of power supply ripple and noise, with no sag under load. The extra headroom that this provides swings the current amplifier further towards its rails, giving a full 70W 8 ohm performance. Higher current output stage - When driving real music into a real loudspeaker load, massive currents are demanded from a power amplifier stage. For the Cyrus 8 our designers have effectively doubled the peak current capability of the power amplifier and halved its output impedance to enable a far greater transfer of energy from the power supply into difficult speaker loads.  Audiophile component specification - In the Cyrus 8 particular attention has been paid to every single signal processing component within the preamplifier stage. Both active and passive components were selected without budgetary compromise and through exhaustive listening tests, delivering an unprecedented level of transparency to the sound. The same scrutiny has been applied to the selection of components in the Pre-Out signal path, essential where the Cyrus 8 is included in a bi-amplified system. Competent audio engineers will immediately recognise the quality which has been invested ‘under the hood’ of this amplifier. Advanced thermal management – New thermal measurement techniques are employed by the computer control system of the Cyrus 8 to intelligently control the outer skin temperature of the casting, maximising the thermal performance available to the amplifier in any environment.    Technical Information  Electrical Line inputs - 5 Line + 2 TapeOutputs - Bi-wire Loudspeakers, Tape-out, Preamp-out, Headphone Power Supply - 330VA Toroidal transformer with 5 regulated railsExternal  - Highly regulated PSX-R upgradeableCommunications  - MC-BUS™ System BUSRemote Control  - Supplied with Cyrus Amp/CD/tuner system remote control  Specifications Continuous Power - 70W/CH (both driven into 8 Ohms) 110W/CH (both driven into 4 Ohms) Burst Power - 340W (IHF, one channel driven into 1 Ohm) Distortion - kHz (into 8 Ohms) kHz (into 4 Ohms) Frequency Response - -3 dB, 0.2Hz and 85kHz Damping Factor - (1kHz) 150 Sensitivity - (50W) Line: 200mV Input impedance - 50kOhm (RCA). Output voltage - 200mV (Tape out), 380mV (Pre out)S/N Ratio - 101dBA (ref. 50W)Channel Balance - ±0.2dB (0dB to -63dB) Volume control accuracy - ±0.1dB (0dB to -63dB) Dimensions - (H x W x D) 73 x 215 x 360 (mm) Weight - 5.5kg Finish - Silver   Read More

Trio KA- Integrated Amplifier

Collectable 70's powerful Stereo music amplifier. Yes the kind that we used to buy in Laskys. Excellent condition still with box. 55 watts per channel Frequency response 20hz - 40hz Dimensions. 380 x140 x 255 mms Collection or local delivery only Read more

Mcintosh MA Integrated Amplifier

Mcintosh MA Integrated Amplifier 220V Minimum sine wave continuous average power output per channel all channels operating is: 200 watts into 2 ohm load 200 watts into 4 ohm 200 watts into 8 ohm load Rated Power Band 20Hz to Hz Total Harmonic Distortion Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output Dynamic Headroom 2.4dB Frequency Response +0, -0.5dB from 20Hz to Hz +0, -3dB from 10Hz to Hz Sensitivity Phono, 2.5mV for 2.5V rated output (0.5mV IHF) High Level, 250mV for 2.5V rated output (50mV IHF) Power Amplifier Input, 2.5V for rated output Signal To Noise Ratio (A Weighted) 90dB (84dB IHF) below 10mV input, Phono Input 100dB (90dB IHF) below rated output, High Level 110dB below rated output, Power Amplifier Intermodulation Distortion Maximum Intermodulation Distortion if instanta- neous peak output per channel does not exceed twice the rated output, for any combination of fre- quencies from 20Hz to Hz, with all channels operating is: % for 2, 4 or 8 ohm loads Input Impedance Phono, 47K ohms, 65pF High Level, 22K ohms Maximum Input Signal Phono, 90mV High Level, 8V Preamplifier Maximum Voltage Output Phono, 8V at tape output High Level, 8V at tape output Main Out, 8V at preamp output Voltage Gain High Level to Tape: 0dB High Level to Main: 20dB Wide Band Damping Factor Greater than 40 Power Requirements 100 Volts, Hz at 5.2 Amps 110 Volts, Hz at 4.8 Amps 120 Volts, Hz at 4.4 Amps 220 Volts, Hz at 2.45 Amps 230 Volts, Hz at 2.35 Amps 240 Volts, Hz at 2.25 Amps Note: Refer to the rear panel of the MA for the correct voltage. Overall Dimensions Front Panel: inches (cm) wide, 7-1/8 inches (cm) high. Depth behind front mounting panel is inches (cm). Clearance required in front of the Front Panel is 1 inch (2.54cm) for knobs. This Amp is in excellent, like-new condition Read More

NAD 310 integrated amplifier

Used amp. Works fine. Minimal signs of wear & tear. Read more

NAD C316BEE Integrated amplifier...

NAD C316BEE Integrated amplifier, This is less than six months old and is now surplus to my requirements. There are some damage marks to the bottom left and right of the front panel - see photos. Complete with remote control.Specification can be seen here:-https://dl.dropboxusercontent.com/u//Datasheet_C316BEE.pdf £, Stroud, .

Kenwood KA- Integrated Amplifier

Kenwood KA- Integrated Amplifier in full working order & very good condition. All pots & selectors are smooth in action with no wear play. This is a powerful, robust and reliable amplifier that I have owned and used over the last 5 years or so. Gold phono RCA sockets. Power output: 80 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 220 Input sensitivity: 0.2mV (MC), 2.5mV (MM), 200mV (line) Signal to noise ratio: 69dB (MC), 87dB (MM), 110dB (line) Channel separation: 60dB (MM), 56dB (line) Output: 200mV (line) Dimensions: 440 x 148 x 396mm Weight: 11.8kg I can demonstrate driving various demanding speakers.

Rotel ra921 integrated amplifier

ideal for someone starting up a hi fi system Read more

Krell integrated amplifier KAV300i

Excellent condition amplifier from the legendary Krell! Only selling as it has a bit too much power (150 wpc into 8ohms, 300 wpc into 6ohms!) for my listening room, hence I've decided to downgrade and let someone else get the true benefit Includes manual and remote control Open to sensible offers Read more

Luxman-590ax-integrated amplifier

Luxman-590ax-integrated amplifier -Excellent condition.with box,manual and accessories..Near Mint. No issues. 1 year old before repackaging into box. Read More

JVC ax v5 integrated amplifier

Surround sound. JVC ax v5 integrated amplifier. Full working order with original remote. Excellent condition and sound. Collection only Crossgates Leeds First come first served Read More

Trio/Kenwood stereo integrated amplifier

Trio/Kenwood stereo integrated amplifier KA- watts per channel minimum. No longer required. Boxed.With instruction manual. Offers taken Read More

Arcam A19 2CH integrated amplifier

Arcam 2ch Amplifier for sale. Great for a 2ch stereo system or looking to upgrade music system. This amplifier is in mint condition and comes with handbook unopened COLLECTION ONLY Read more

NAD 310 stereo integrated amplifier

NAD 310 stereo integrated amplifier. Very good quality with excellent sound. Buyer to collect Read more

Cambridge Audio A1 integrated amplifier

Here is a Cambridge Audio A1 integrated amplifier, in very good condition and includes the original packaging. All inputs/ outputs, adjustment dials work - balance, volume, tone, input select, tape monitor etc. Other information/ photographs etc. are available. These amps are suppose to be good entry-level amplifiers, and I've found the Cambridge Audio amps I've owned to have produced high-quality audio, although the sound produced will be affected depending on your other equipment etc. Thanks for reading. Read More

Pioneer A-400 Integrated Amplifier

Highly regraded & sort after amplifier in full working order. Amazing detailed sound. Great soundstage and punchy bass. Built in Phono Stage. Voted in at number 5 in the top 50 HiFi Choice's 'HiFi That Rocked the World' list - this is a very capable & engaging amplifier. Power output: 50 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.03% Input sensitivity: 0.2mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 69dB (MC), 87dB (MM), 108dB (line) Output: 150mV (line) Dimensions: 420 x 352 x 126mm Weight: 8kg Refer to the internet for reviews of this sort after amplifier. I can demonstrate driving various demanding speakers.

Integrated 4 zone mixer amplifier

Integrated 4 zone mixer amplifier And 2 speakers Pick up m Read More

Contact

• Next →