sony cd radio tape and mini disc stereo in fareham

Sony cd, radio, tape and mini disc stereo in Fareham

Sony stereo with 2 speakers. Plays CDs, tapes and mini disc. Has radio tuner. Records to tapes or mini discs. Collection only.

Sony HiFi Stereo with 5 CD Changer, Mini Disc & Radio

I have for sale a Sony HiFi Stereo with 5 CD Changer, Mini Disc & Radio. Fully working and sounds amazing From a smoke free & pet free home Collection from Hornchurch or Brentwood Read More

Sony CD Radio Tape Stereo/Boombox/Speakers

A fully working, fun, boombox/stereo. It plays FM radio, CDs, and Tape. Read More

Stereo system with 3 cd's radio and tape in Cardiff

Stereo system with 3 cd's radio and tape. Good sound.

STEREO, CD, TAPE, RADIO in Ashford

SMALL STEREO MUSIC SYSTEM. PLAYS CD, TAPE, RADIO. CANNOT PUT PIC ON AS IT FAILS TO DO THIS. VERY NICE LITTLE SYSTEM. CASH ON COLLECTION. ====================

Sony radio, tape and CD casette player in Barnstaple

Sony portable radio/casette player CFD-S350L

Sony CMT-CP33MD Cd/Mini-Disc/Cassette Tape/FM Micro Hi-FI

Sony Micro Hifi CMT-CP33MD Excellent condition Mini-disc CD Cassette Tape FM Does not come with speakers Collection only Read More

Armstrong 521 Stereo Amplifier for disc/tape/MP3/CD* in

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the 70's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. £75 ono. Carefully packed and posts for £7.99 by courier to UK, insured and signed for. * Note that MP3 players will need a 3.5 mm stereo jack to male phono plugs cable to connect the earphone output to the amplifier 'radio' inputs, and a low volume setting from the MP3 player. Modern CD players with 2V level 'line' outputs will need a resistive attenuator to drop the level from 2V to 0.4V (or less), so a divide by 5 (-14db) or divide by db) in-line device will be required between the CD player line out and the amplifier 'tape' inputs. If the CD player has a headphone output (3.5 mm jack plug), then the same connection method as stated above for an MP3 player, can be used. Specifications: Output power (RMS): 2 x 20 W into 4 to 8 Ohms, 2 x 15 W into 15 Ohms Frequency response: 22 Hz to 20 kHz (-1 db) Distortion: Less than 0.5 % at 2 x 15 W output Inputs: 2 x 3.5 mV / 60 mV (switch selectable magnetic/ceramic cartridge), 2 x 0.4 V (tape), 2 x 0.1 V (radio), both at 100 k Ohm input impedance Noise level (RMS): -55 db (magnetic cartridge), -60 db (radio), -70 db (tape) Line output: 2 x 0.4 V (via adjustable tone controls) Headphone out: 1 x 6.3 mm stereo (low impedance, mutes main speaker outputs) Rotary controls: Volume, balance, treble, bass Push button controls: Power on/off, rumble filter (-5 db at 30Hz), treble cut 1 (-3 db at 6.5 kHz & -25 db at 10 kHz), treble cut 2 (-3 db at 4.5 kHz & -40 db at 9.0 kHz), loudness (-20 db at 1kHz produces +10 db at 70 Hz & +5db at 10 kHz), tape input, tape output, radio input, magnetic cartridge input, ceramic cartridge input Power supply: , Vac (selectable), Hz, transformer isolated, internal linear voltage regulated, ~ 20 W (idling) ~ 70 W (max) Cooling: Passive - air cooled Dimensions: 29.5 cm (W) x 29.0 cm (D) x 12.5 cm (H) Weight: 5.5 kg

Car radio and tape and 6 disc CD player

All in good condition collection only Ad ID: Delivery Service Consumer Credit

SONY cd,tape MP3 and radio player

SONY CMT-CPX11 (micro hi fi Component System) Perfect working order. Looks brand new. Speakers 91/2 by 61/4 by 91/2. Playing unit 91/2 by 7 by inches. 

AIWA mini HIFI stereo cd and tape player

Silver Compact AIWA stereo, good sound quality, (iPod connectivity with auxiliary lead possible) cd and tape player

Panasonic portable stereo w/ CD, tape & radio

Panasonic Power Blaster RX-DS28. Stereo CD system with AM/FM radio and tape player. Retro, but in perfect working order! Read more

Armstrong 521 Stereo Amplifier for disc/tape/MP3/CD*

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the 70's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. Posts by courier to UK. * Note that MP3 players will need a 3.5 mm stereo jack to male phono plugs cable to connect the earphone output to the amplifier 'radio' inputs, and a low volume setting from the MP3 player. Modern CD players with 2V level 'line' outputs will need a resistive attenuator to drop the level from 2V to 0.4V (or less), so a divide by 5 (-14db) or divide by db) in-line device will be required between the CD player line out and the amplifier 'tape' inputs. If the CD player has a headphone output (3.5 mm jack plug), then the same connection method as stated above for an MP3 player, can be used. Specifications: Output power (RMS): 2 x 20 W into 4 to 8 Ohms, 2 x 15 W into 15 Ohms Frequency response: 22 Hz to 20 kHz (-1 db) Distortion: Less than 0.5 % at 2 x 15 W output Inputs: 2 x 3.5 mV / 60 mV (switch selectable magnetic/ceramic cartridge), 2 x 0.4 V (tape), 2 x 0.1 V (radio), both at 100k Ohm input impedance Noise level (RMS): -55 db (magnetic cartridge), -60 db (radio), -70 db (tape) Line output: 2 x 0.4 V (via adjustable tone controls) Headphone out: 1 x 6.3 mm stereo (low impedance, mutes main speaker outputs) Rotary controls: Volume, balance, treble, bass Push button controls: Power on/off, rumble filter (-5 db at 30Hz), treble cut 1 (-3 db at 6.5 kHz & -25 db at 10 kHz), treble cut 2 (-3 db at 4.5 kHz & -40 db at 9.0 kHz), loudness (-20 db at 1kHz produces +10 db at 70 Hz & +5db at 10 kHz), tape input, tape output, radio input, magnetic cartridge input, ceramic cartridge input Power supply: , Vac (selectable), Hz, transformer isolated, internal linear voltage regulated, ~ 20 W (idling) ~ 70 W (max) Cooling: Passive - air cooled Dimensions: 29.5 cm (W) x 29.0 cm (D) x 12.5 cm (H) Weight: 5.5 kg Read More

STEREO CD SYSTEM, TAPE, RADIO, IMMACULATE, MAINS OR BATTERY

PANASONIC PORTABLE STEREO CD SYSTEM, TAPE AND RADIO. MAINS OR BATTERY. IMMACULATE CONDITION. RADIO FREQUENCY = FM AND AM REMOTE CONTROL Read more

Vintage Armstrong 521 Stereo Amplifier for disc/tape/MP3/CD*

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the late 60's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. £75 ono. Carefully packed and posts for £ by courier to UK, insured and signed for. * Note that MP3 players will need a 3.5 mm stereo jack to male phono plugs cable to connect the earphone output to the amplifier 'tape' inputs, and a low volume setting from the MP3 player. Modern CD players with 2V level 'line' outputs will need a resistive attenuator to drop the level from 2V to 0.4V (or less), so a divide by 5 (-14db) or divide by db) in-line device will be required between the CD player line out and the amplifier 'tape' inputs. Specifications: Output power (RMS): 2 x 20 W into 4 to 8 Ohms, 2 x 15 W into 15 Ohms Frequency response: 22 Hz to 20 kHz (-1 db) Distortion: Less than 0.5 % at 2 x 15 W output Inputs: 2 x 3.5 mV / 60 mV (switch selectable magnetic/ceramic cartridge), 2 x 0.4 V (tape), 2 x 0.1 V (radio), both at 100 k Ohm input impedance Noise level (RMS): -55 db (magnetic cartridge), -60 db (radio), -70 db (tape) Line output: 2 x 0.4 V (via adjustable tone controls) Headphone out: 1 x 6.3 mm stereo (low impedance, mutes main speaker outputs) Rotary controls: Volume, balance, treble, bass Push button controls: Power on/off, rumble filter (-5 db at 30Hz), treble cut 1 (-3 db at 6.5 kHz & -25 db at 10 kHz), treble cut 2 (-3 db at 4.5 kHz & -40 db at 9.0 kHz), loudness (-20 db at 1 kHz produces +10 db at 70 Hz & +5db at 10 kHz), tape input, tape output, radio input, magnetic cartridge input, ceramic cartridge input Power supply: , Vac (selectable), Hz, transformer isolated, internal linear voltage regulated, ~ 20 W (idling) ~ 70 W (max) Cooling: Passive - air cooled Dimensions: 29.5 cm (W) x 29.0 cm (D) x 12.5 cm (H) Weight: 5.5 kg

Vintage Armstrong 521 Stereo Amplifier for disc/tape/MP3/CD*

Very nice example of this highly acclaimed Hi-Fi stereo amplifier from the late 60's. Unmodified - with original AL102 germanium power transistors and two pin speaker plugs. Has been cleaned and all functions checked after a long period of storage (Bias, main caps checked and switches cleaned). Teak sleeve case is in very good condition. Collectors item. £75 ono. Carefully packed and posts for £ by courier to UK, insured and signed for. * Note that MP3 players will need a 3.5 mm stereo jack to male phono plugs cable to connect the earphone output to the amplifier 'tape' inputs, and a low volume setting from the MP3 player. Modern CD players with 2V level 'line' outputs will need a resistive attenuator to drop the level from 2V to 0.4V (or less), so a divide by 5 (-14db) or divide by db) in-line device will be required between the CD player line out and the amplifier 'tape' inputs. Specifications: Output power (RMS): 2 x 20 W into 4 to 8 Ohms, 2 x 15 W into 15 Ohms Frequency response: 22 Hz to 20 kHz (-1 db) Distortion: Less than 0.5 % at 2 x 15 W output Inputs: 2 x 3.5 mV / 60 mV (switch selectable magnetic/ceramic cartridge), 2 x 0.4 V (tape), 2 x 0.1 V (radio), both at 100 k Ohm input impedance Noise level (RMS): -55 db (magnetic cartridge), -60 db (radio), -70 db (tape) Line output: 2 x 0.4 V (via adjustable tone controls) Headphone out: 1 x 6.3 mm stereo (low impedance, mutes main speaker outputs) Rotary controls: Volume, balance, treble, bass Push button controls: Power on/off, rumble filter (-5 db at 30Hz), treble cut 1 (-3 db at 6.5 kHz & -25 db at 10 kHz), treble cut 2 (-3 db at 4.5 kHz & -40 db at 9.0 kHz), loudness (-20 db at 1 kHz produces +10 db at 70 Hz & +5db at 10 kHz), tape input, tape output, radio input, magnetic cartridge input, ceramic cartridge input Power supply: , Vac (selectable), Hz, transformer isolated, internal linear voltage regulated, ~ 20 W (idling) ~ 70 W (max) Cooling: Passive - air cooled

Sony Aiwa Stereo, cassette and CD player with Radio Fm and

This Sony Aiwa Stereo has 2x cassettes and 3x Cd player and radio, It is in very good condition like NEW. £50 or near offer

SONY CD/TAPE/RADIO

SONY CD/TAPE/RADIO player. In good condition. Speakers seperate from main section. Read more

SONY RADIO, TAPE BUT CD HOLDER WILL NOT OPEN. in Ashford

Sony, radio and tape. Cd holder will not open. MUST BE COLLECTION.

Sony Radio/CD/Tape Player

Sony Radio/CD/Tape player in very good condition. Mains or battery powered.With Bass Boost. Read More

Sony portable cd, radio, tape player

Sony portable cd, radio, tape player all in working order cash on collection in Leicester £7 will post for a small postage price in the UK. Read More

Sony 5 disc Cd changer stereo

Sony 5 disc CD changer radio and cassette tape player. Excellent quality like brand new. Amazing sound!! Collection only Read More

Sony stereo CD/ Radio/ cassett

Sony stereo CD/ Radio/ cassette player /DAB/ speakers and remote 30 ()

Sony stereo CD/ Radio/ cassett

Sony stereo CD/ Radio/ cassette player /DAB/ speakers and remote 35 ()

SONY MINI HI-FI ALL-IN-ONE AUDIO SYSTEM with radio, CD, and

Sony mini Hi-Fi all-in-one audio system with radio, CD and audio input Plays CDs Audio input – connect your digital music players or phones and play Headphone out DAB radio, FM, AM Sleep timer 18W capacity With speakers and remote control Working perfectly. Fully functional and in great condition. Small, yet loud and strong. £10 Read more

Contact

• Next →