Fitted wardrobe with sliding doors
Set of Stanley sliding wardrobe doors. You have to construct these within an alcove or fit them into a corner with a separate end panel, which can be provided. This allows you then to create your own inside format, with hanging rails, shelves, cupboards etc, that you can build yourself. Existing format can be provided. The top and bottom rails are 122cm long (48”), there are 2 doors (light oak in colour) each 61cm (2 feet) wide and 236cm high (7 feet 9 inches) high. Floor to ceiling. The doors have connectors to attach to the top rail, and then slot into the groove on the bottom rail. The connectors on the top of the doors are adjustable if minor adjustments are needed. When fitted the doors overlap by an inch on either edge so there are no gaps. The inside is configured as follows and can be supplied, along with the end panel: Left hand side: 46cm wide, 2 shelves to the top, hanging rail below takes a full hanging item. Right hand side: 74cm wide with hanging rail to top and shelf in the middle. Cash and collect, no delivery. Offers invited. Read More