reduced to electric single phase glass kiln nabertherm p300 controller incl shelf furniture

REDUCED TO £ Electric single phase glass kiln Nabertherm P300 controller incl shelf & furniture

Hi for sale is my Nabertherm Glass Kiln which I bought when I started university only reason for selling is I need a deeper one for pot melts and casting. It was second hand when I purchased it and I have only used it a handful of times with good results. It is in very good condition. It comes with 2 shelves and the props and the controller is a P300 the approx dimensions are Internal Length 37" Width 23.5" Height 9" External Length 42" Width including power box at back 33" Height including legs and castors 21" It has a slightly damaged top brick which can be seen in the photos 2.5" long slit which can be seen in the photos and a small section of the element has popped out of the groove so could do with being clipped back in. It is advertised on other sites. Collection is from Cheshire only as I do not have the means to pallet it Im sorry Ad ID: Delivery Service Consumer Credit

Electric Pottery Kiln Single phase

pottery kiln Single phase Runs from 30 amp cooker socket kilns and furnaces Good working order Ad ID: Delivery Service Consumer Credit

Nabertherm Plug in Kiln 60L

Nabertherm are the best kilns you can buy. They are made in Germany the largest plug in kiln you can buy is 60L and they are much harder to get. Usually plug in kilns are hobby kilns and only 40L. 60L kilns usually come in 3 phase not a single plug. My kiln is in excellent working condition and fires beautifully there is a little bit of damage to the inside of the lid but that was done when I first got it and if you know kilns you will know this does not effect the firing at all. There is a lot of kiln furniture. It fires to degrees so high enough for any hobby whether it is ceramics or glass. If you are interested please call me on Thank you for looking. Ad ID: Delivery Service Consumer Credit

Nabertherm Kiln N300/H and accessories

Nabertherm Kiln N300/H – Bought in and little used in fabulous condition. There are some shelves and props included - see picture PLEASE NOTE - The Kiln will require removal through a doorway which is one meter from the ground - purchaser to organise and pay for this. It weighs 550 Kg. Width 890mm - Depth mm - Height mm - It is 3 phase. Read More

Wanted - electric pottery kiln with controller

I am seeking a good condition electric kiln which must be single phase but can be up to 25 amps. I would prefer nearly new but as long as it is in good condition I would consider a kiln up to 10 years old. Must have a controller in working order. Read More

Single phase to 3 phase converter

Got this as apart of a package deal with a compressor but never has to use it, it's just been sitting in the corner. The person I got it from used it to run the compressor and said it was all working when I brought it. Any questions text or call Tim on Ad ID: Delivery Services Consumer Credit

Paragon Glass Kiln with a Touch n Fire II - DTC controller

This kiln, is the most versatile kiln available. Front door works great for glassblowers, 12" bead mandrels can be placed in the 13" deep kiln, it can fuse a decent sized project and it runs on common house hold power Dial control switch is included with this kiln. This kiln is insulated with fiber. The element is buried in the wall, no exposed elements. This helps prevent risk of electrical shock for beadmakers or glassblowers. These kilns can also be used for glass fusing/slumping, beadmaking, marblemaking, glassblowing, art clay silver, ceramics (up to degrees F.), copper enameling, or many different uses. Maximum temperature is degrees F. With the kiln and controller will come the following items: Kiln shelf x 3 Shelf supports x 11 (various) Circular slump mold Rectangular (tile) slump mold Slumping bowl Fritz (assorted) Glass paint (assorted) Assorted books on glass history, cutting, fusing and slumping Collection is in person or a collection service arranged by you only Ad ID: Delivery Service Consumer Credit

'Reduced to Clear' Small 3 Shelf Clear Glass AV / Hi-Fi / TV Unit Support, Boxed

Unused,still boxed For AV Equipment / Hi-Fi / LCD / TV Alphason Designs AD 3/51-LCD Clear glass/silver frame supports Instructions H51xW60xD40cm Weight 12KG Put together once,changed mind,put back in box. Cost £120 Was £15, now £10 Ad ID: Delivery Services Consumer Credit

REDUCED small raku kiln, Raku kiln By Fordham Thermal...

REDUCED small raku kiln, Raku kilnBy Fordham Thermal Systems LTDIt measures internal 23 by 23 inchesThe lid was originally insulation material [see bag] contained within the metal circular frame and covered with thick foil [see bag]. The insulation material [ceramic fibre] is easily obtainable and cheap as is fire cementFor simpler lid you could just use a piece if thick ceramic material [from a kiln maker, materials supplier or repairer]The base has casters which still turn but need oiling, base is made of asbestos board but could just as well be lined plywood. The hole you see in the lower body is for the blow torch and the piece of brick can be cemented back in place [next to the hole]The round ceramic item with a hole is the flue which will be part of the lidIt is modular and can be extended upwards [with an extension]All in all an easy diy job for a lovely little portable kiln which is quick to heat up and very easy to lift, its ideal for demo's at events etc. or [cant read/reply to texts] £, Bristol, .

Kiln: very large heavy electric top loading kiln for sale

Large electric top loading kiln for sale. 10kW dedicated 240v mains supply needed (single phase). This is very heavy and will need at least four strong people to lift and collect it, using a big van or pickup. It will not fit in any car or small van! Buyer collects, with helpers although I can help to lift, it will need bringing other people to help. Photos to follow ASAP Ad ID: Delivery Service Consumer Credit

3 phase pottery kiln

Ulster Pottery professional kiln Very little used With controller Read more

single phase electric motor

Works perfectly, 240 volt, I bought this as a back up motor for my lathe but have since sold the lathe and no longer need the motor. Custard tin used for scale, not included in price Read More

Ulster pottery kiln, 3 phase

The kiln is 160 high, 112 deep and 82 wide in front. It weigh 450 kg Good condition Very little used Some glazes too Must be collected across border Donegal close to Glenties Read more

MAINS SINGLE PHASE ELECTRIC MOTOR

Single phase electric motor. Very heavy sturdy build on base board. The motor shaft is fitted with a Kopp heavy duty gearbox giving a useable shaft output speed that can be varied between 1 and 999 revs per min. I bought it years ago to fit a drum for gemstone polishing but never got round to it.. Collection only. Read More

Cromartie electric ceramic pottery kiln, open to offers.

This kiln runs off a 32amp supply. The following work needs to be done before it can be used: New 2m of 4mm2 3core HD flex from kiln to 32A industrial plug. Check condition and functionality of door interlock switch. Check characteristics of elements – insulation and resistance. Check condition of main contactor Replace damaged flexible conduit. Mount controller in a suitable place Wire controller to main contactor, pyrometer and mains supply. Test functionality of system. The kiln comes with metal stand and shelves. This would cost around £150 including materials & labour, if carried out by a qualified electrician. The bricks and elements appear to be in good condition. Once this work has been done you will have quite a large and powerful kiln made by one of the most reputable manufacturers of kilns, their modern equivalents cost over £. You will need to collect it from my studio, which has a loading bay. It weighs about 200kg so would need a few strong people to lift it. I'm open to offers to please email with any questions Ad ID: Delivery Service Consumer Credit

Reduced corner chrome toughened glass bathroom shelf

Good order, used for a short period expands from 1.5metres to 2.5 metres Purchased from Argos for approx £40 Buyer to collect as cannot post..boxed and instructions Collection LE9 area EArl Shilton Read More

Reduced corner chrome toughened glass bathroom shelf

Good order, used for a short period expands from 1.5metres to 2.5 metres Purchased from Argos for approx £40 Buyer to collect as cannot post..boxed and instructions Collection LE9 area EArl Shilton Read more

Electric pro Potters wheel and large Firing Kiln Priced to

Second hand - Electric Potters wheel and large 5ft x 3ft 3 phase Firing kiln - kiln obviously very heavy - buyer collects and arranges same Priced to clear - photos on request - near Sherborne

Clarke Devil Kw Single Phase Industrial Electric Fan Heater

Clarke Devil Kw Single Phase Industrial Electric Fan Heater RRP - £109/heater Heaters were used for one winter - only overnight - never on full speed. Recently passed all commercial testing. If both were taken by one buyer - discounted price £100 for both. Clarke Devil 3Kw Single Phase Industrial Electric Fan Heater. A rugged 230V electric powered fan heater which is ideal for use in small to medium sized premises. Suitable for use in both commercial & home workshops, garages & shops. The Devil is housed in a robust steel cabinet and has variable heat output, with thermostatic control, to achieve desired room temperature. Features Adjustable 1.5 to 3kW heat output 3kW max. absorbed power / 230V 1ph supply 512m³/h max. airflow rate Encapsulated stainless steel heating element Safety thermostat prevents overheating Insulated handles for safe handling Dimensions (DWH) 295x265x425mm / Weight 5.5kg Some details from original selling page: Weight Brand Clarke Power Products Finish No Fuel type No IP Rating No Suitable for Open Spaces 0 Suitable for Enclosed Spaces Yes Area (enclosed) m3 No Area (open) m2 No Heat Output (kw) Remote Control No Thermostat Yes Casters No Power consumption (W) Frequency (Hz) No Running Current 13 Voltage (V) 230 Height (mm) 425 Width (mm) 265 Depth (mm) 295 Warranty (years) 1 Filter No Timer No Noise Level (dB) No Ad ID:

Doors colonial internal x3 incl furniture white + 2 glass

3 internal doors good condition pet smoke child free bedroom doors handles and hinges collect only ts15 yarm cleveland 27 inches wide could deliver locally from 15 pounds also 2 part glass internal doors (12 small panels, taking 2/3 of the door bottom third wood) painted white, 50 pounds for the 2 or near offer Read More

Tempered Glass Office Table with Glass Keyboard Shelf and Little Glass Shelf On Top

Great offer!!!! All tempered glass office table in very good condition with some minor scratches on the Chrome Handle. Comes with glass keyboard shelf and little glass shelf on top of the desk. Perfect for your home office or living room. Category: Tables Subcategory: Desks Room Type: Office Material: Glass Dimensions(WxHxL): 120cm x 70cm x 60cm The item has the below faults: Scratches on chrome handle / one loose screw for keyboard draw. The item is located at this postcode: e179nf Ad ID: Delivery Service Consumer Credit

Eastcoast P300 P Electric Bass Guitar in Sunburst for sale.

Eastcoast P300 P Electric Bass Guitar in Sunburst for sale. Right Handed, Pickups: 1 x PB Controls: 1 x Volume + 1 x Tone. Body: solid Alder Neck: Hard Maple, bolt-on, 867 mm, (34.2 in.) Fingerboard: Rosewood, 20 frets Bridge: "PB" Classic Machine Heads: Standard "P", nickel Reason for sale = I am purchasing a new bass guitar as I have had this bass for learning and jamming, I have developed my bassist skills rapidly so I am ready for a new bass. NOTE: nothing is faulty, broken or damaged on this bass.

BROTHER ELECTRIC CLUTCH MOTOR 400 WATT. SINGLE PHASE. V SWITCH UNIT

BROTHER CLUTCH MOTOR. CONDENSER MOTOR. MD-344-A PHASE 1 POLE 2 WATTS 400 HERTZ 50 VOLTS AMPS 2.5 RPM SERIAL NUMBER BROTHER SWITCH UNIT. GOOD WORKING ORDER. RECENTLY REMOVED FROM SEWING MACHINE UNIT. BUYER MUST COLLECT. Ad ID:

Solid pine shelf/display unit REDUCED TO SELL

Solid pine unit. 51 inches tall, 38 inches wide and 9 inches depth. Buyer collects please. Cash on collection. Thank you.

Startrite bandsaw 3 phase (Can be altered to single

Startrite bandsaw 3 phase (Can be altered to single phase), Startrite bandsaw (3 phase) with tilting table, light and cutting guide. This is a well made quality piece of machinery. Can be viewed during working hours at Kings Lynn. This can be altered to single phase by changing the motor which is quite an easy and low cost job to do.No texts please. £, King's Lynn,.

Contact

• Next →