Waterco MultiCyclone MC16 Pre Filter
Used but great at getting rid of larger items before filter. Open to offers as upgrading pond. The New MultiCyclone Solids Remover from Absolute Koi is an innovative pre-filter device that is both capable of saving water and reducing filter maintenance. The MultiCyclone filter will filter out up to 80% of the incoming waste from your koi pond. The MultiCyclone filter works on the principal of centrifugal water filtration, with no moving parts and no filter media to clean or replace. These 'plug and Play' mechanical filters will provide years of maintenance free service. The MultiCyclone filter is best suited and designed as a pre-filter or from a skimmer unit, reducing the ammount of fine particules before entering your filter. The MultiCyclone Pre filters are pressure units and require the water to be pumped in to the unit. How Does MultiCyclone Filter Work? The incoming water from the base of the MultiCyclone filter is guided by a diverter plate so that it enters 16 multiple hydro cyclones tangentially, generating a strong centrifugal effect. This spins the sediment out to the hydro cyclone’s wall and then spirals it down to the sediment sump, while the cleansed water spirals upwards towards the centre of the hydro cyclone where the water flow reverses and then spirals upwards through the outlet at the top of the device. The accumulation of sediment can be visibly monitored through the MultiCylcone clear sediment sump. The MultiCyclone filter is cleaned by simply opening the 25 mm purge valve. Only 15 litres of water is discharged to clean the MultiCyclone filter of sediment. Ad ID: Delivery Service Consumer Credit