pintel mounted mast support for road trailing with holes for lighting board mount

Pintel mounted mast support for road trailing, with holes for lighting board mount.

Pintel mounted mast support for road trailing, with holes for lighting board mount.

For road trailing a sailing dinghy, this mast support bracket fits onto the dinghy's rudder pintles. It has bolt holes to attach your lighting board. It's 51cm (20") in long. The position of each of the fittings is on an adjustable slide to match your boat's pintles. The "y" piece has holes to tie down the mast. (your boat trailer should have a tall "Y" support at the front too.) I used it for a few years and it's perfect, a "Barton" make.

TOPPER DINGHY TRAILER LIGHTING BOARD & MAST SUPPORT

TOPPER DINGHY TRAILER LIGHTING BOARD & MAST SUPPORT

TOPPER DINGHY TRAILER LIGHTING BOARD & MAST SUPPORT Home made wooden trailer lighting board incorporating a slot and fixing for the mast. Pin and socket to fit the Topper Dinghy rudder assembly. Good Condition £ O.V.N.O. Ad ID: Delivery Service Consumer Credit

Related products pintel mounted mast support for road trailing with holes for lighting board mount: TOPPER DINGHY TRAILER LIGHTING BOARD & MAST SUPPORT
Thule tow ball mounted Bike Carrier and lighting board for sale. Takes two bikes

Thule tow ball mounted Bike Carrier and lighting board for sale. Takes two bikes

Very easy to fit tow ball mounted bike carrier. Comes with lighting board and foam bike protectors. Takes two bikes. Thule Xpress. Hardly used. Only selling as no longer have car with tow ball. To arrange to come and view (Newington), phone John on Ad ID: Delivery Service Consumer Credit

Towbar mounted cycle carrier with lighting board

Towbar mounted cycle carrier with lighting board

2 bike cycle carrier with trailer board by towsure Carrier fits to bracket on towbar leaving access to towball and tailgate Also includes security cable, clamps, padlocks and bungees Phone Dave £30 Burntisland Ad ID: Delivery Service Consumer Credit

Related products pintel mounted mast support for road trailing with holes for lighting board mount: Towbar mounted cycle carrier with lighting board
Towbar mounted bike rack with lighting board.

Towbar mounted bike rack with lighting board.

Towbar mounted bike rack. Easily removable, holds up to four bikes, four using complete kit, two on the short bar or one in space saving mode. Heavy duty construction. Easy to use, just slot into tow bar bracket and plug in electrics. Can be fitted and demonstrated. £60.ono Ad ID: Delivery Service Consumer Credit

wood veneer storage unit, ideal for under wall mounted tv, holes in rear for cables etc.

wood veneer storage unit, ideal for under wall mounted tv, holes in rear for cables etc.

wood veneer storage unit, drawer to one side, drop down front RH side, mm long x 550mm wide x 260mm high free to good home Ad ID: Delivery Service Consumer Credit

Related products pintel mounted mast support for road trailing with holes for lighting board mount: wood veneer storage unit, ideal for under wall mounted tv, holes in rear for cables etc.
Mast base and extension for windsurfer (compatible with a Hifly Superfun board)

Mast base and extension for windsurfer (compatible with a Hifly Superfun board)

This sale is for a mast base and extension (the bits that join a windsurfer mast to the board). I used it with a Hifly Superfun board in the 90s, so it's got some age, but its still in good condition. Please see also my other sale items - mast, boom, board and seat harness. Collection only. Ad ID: Delivery Service Consumer Credit

Car Tow bracket mounted Bike Carriers 2 sets for 2 or 3/4 bikes, lighting board,cable 7 pin plug

Car Tow bracket mounted Bike Carriers 2 sets for 2 or 3/4 bikes, lighting board,cable 7 pin plug

2 sets tow bar bracket mounted bike carriers by Track hardly used v.good as towball remains free l set carries 2 bikes 1 set carries 3/4 bikes with lighting board 2 m cable 7 pin plug complete with bolts and 2 extra padlocks easily installed, durable polyester finish durable ABS construction in original boxes as very very little use Ad ID: Delivery Service Consumer Credit

Related products pintel mounted mast support for road trailing with holes for lighting board mount: Car Tow bracket mounted Bike Carriers 2 sets for 2 or 3/4 bikes, lighting board,cable 7 pin plug
Seaview SM-18-R Mast Mount For Raymarine 2KW & GMR18 - Boat

Seaview SM-18-R Mast Mount For Raymarine 2KW & GMR18 - Boat

Mast Platforms. 18

Starboard Pro 9'8" SUP board with windsurf Inserts for mast foot and foot straps.

Starboard Pro 9'8" SUP board with windsurf Inserts for mast foot and foot straps.

Starboard Pro 9'8" SUP board with windsurf Attachments for mast foot and foot straps. This is the narrower 29" pro 9'8" that Starboard introduced a few years ago. It is in the lightest construction you can get that still includes the factory fitted windsurfing inserts This has also doubled as a brilliant board to teach my kids to windsurf. The Pro is fantastic in waves but still has pretty good glide on flat water. Our kids loved paddling this one on flat water as it has a slightly narrower width but still plenty of stability. This board is in really good condition overall with a couple of minor cosmetic scrapes to the gel coat from paddle dings. There are a few gel coat chips to the tail where the zip from the board bag wasn't closed properly. This is purely cosmetic and can be repaired very easily. This board has a 2/3 deck/traction pad which makes it very comfortable for longer flat water paddles and also gives great grip in the waves. I will consider any sensible offers but this is a fantastic opportunity to get a great board at a bargain price just before Christmas! I will also consider parcelling up at your own risk if you'd like to arrange a courier but it would obviously be better to pick up locally. Complete with Whasup custom made board bag. Ad ID:

Related products pintel mounted mast support for road trailing with holes for lighting board mount: Starboard Pro 9'8" SUP board with windsurf Inserts for mast foot and foot straps.
Thule 2 bike carrier for towbar, with lighting board etc

Thule 2 bike carrier for towbar, with lighting board etc

Thule 2 cycle towbar carrier with lighting board. Good condition. Collection only Ad ID: Delivery Service Consumer Credit

Windsurfer for sale. Vista kestrel sail board, sail, mast, boom, center board and skeg

Windsurfer for sale. Vista kestrel sail board, sail, mast, boom, center board and skeg

Full set up windsurfer. Vista kestrel. Board, mast, sail, center board, boom and skeg. Comes with sleeve for sail. Great condition. I bought this 2 weeks ago to holiday up north of scotland. Works fine just a bit big for me. I am only 5 foot 6. Will be perfect for someone taller. A bargain at £60

Related products pintel mounted mast support for road trailing with holes for lighting board mount: Windsurfer for sale. Vista kestrel sail board, sail, mast, boom, center board and skeg
FREE for Collector! ' windsurfer Board with15' mast.

FREE for Collector! ' windsurfer Board with15' mast.

A built Windsurfing Board, approx 12 ft long, and 26 inches wide, complete with wooden centre fin, and 15 ft mast with wooden mast step, in good condition. Sail still rolled up so not sure of condition, so assume not perfect. Built in Holland by 'Ten cate Sports', PO box 58 Almero, Holland. Makers name plate included numbers TCW FB77. Make a great paddle board!

Windsurf board, mast and sail. Ten Cate Runner complete with foot straps, mast, and 5.8m sail

Windsurf board, mast and sail. Ten Cate Runner complete with foot straps, mast, and 5.8m sail

Ten Cate Runner Windsurf board and all accessories. This is about twenty years old but still in working order. Sail is 5.8 sq m and has no tears or holes. The rubber lining the dagger board slot is perished, but this does not affect its ability to sail. Has always been rinsed off after use and stored indoors. Would suit learner - for use on lake or sea. Ad ID: Delivery Service Consumer Credit

Related products pintel mounted mast support for road trailing with holes for lighting board mount: Windsurf board, mast and sail. Ten Cate Runner complete with foot straps, mast, and 5.8m sail
Lanparte should mount support for dslr or blackmagic

Lanparte should mount support for dslr or blackmagic

Selling Lanparte shoulder support. Comes with shoulder pad, 2 sets of 15mm rods, a handle. Great build quality. Ad ID: Delivery Service Consumer Credit

BUZZ GEAR MOOSE TOW BAR MOUNTED BIKE RACK FOR 4 BIKES WITH LIGHT BOARD

BUZZ GEAR MOOSE TOW BAR MOUNTED BIKE RACK FOR 4 BIKES WITH LIGHT BOARD

FOUR BIKE RACK - USED - EXCELLENT CONDITION. See images (3 of actual item for sale and 3 from online ad) and You Tube Clip. Not boxed but comes complete with ties. Carries 4 adult bikes - easy to use and allows full access to car boot. Costs around £120 new. Key not included. We are also including a separate light board in the asking price (Cost around £ new) BUYER COLLECT ONLY Ad ID: Delivery Service Consumer Credit

Related products pintel mounted mast support for road trailing with holes for lighting board mount: BUZZ GEAR MOOSE TOW BAR MOUNTED BIKE RACK FOR 4 BIKES WITH LIGHT BOARD
Motorcycle 360 Degree Rotating Mount Holder Support for GPS

Motorcycle 360 Degree Rotating Mount Holder Support for GPS

SKU: , Material:Plastic; Color:Black; Dimensions (cm):9.5 x 4.8 x 14.3; Weight (kg): Buy Now

Hague suction mount for DSLR or Camcorder - camera support

Hague suction mount for DSLR or Camcorder - camera support

Hague SM1 Car Camera Suction Mount With Double Ball Tilt Head Description from Hague: The Hague SM1 Car Camera Suction Mount can be attached to any non-porous surface, which makes it ideal for mounting the camera onto a vehicle whether inside or out. It can be fixed either vertically or horizontally. The camera fastens to a reversible camera plate, which enables the camera to be mounted above or below the suction mount. This makes it ideal for use on a car windscreen, the camera can be positioned to look through the windscreen or into the vehicle. A fully adjustable double ball bracket has a single lever for locking the camera into the required position. It's ideal for all types of handheld cameras up to 1.5kg. I have used this personally with DSLR mounted to glass (similar to pictured) taking time lapse shots of shop build. Also suited for mounting camera to car for action shots. (price plus postage or free to collect) Ad ID: Delivery Service Consumer Credit

Related products pintel mounted mast support for road trailing with holes for lighting board mount: Hague suction mount for DSLR or Camcorder - camera support
Satellite dish supporting mast 12ft x 2inch dia with 2 support brackets

Satellite dish supporting mast 12ft x 2inch dia with 2 support brackets

Satellite dish supporting mast with 2 support brackets Aluminium 12ft x 2 inch diameter As new condition £50 ono Located in td5 (near Ednam) Phone Les on Ad ID: Delivery Service Consumer Credit

BIC VELOCE 328 WINDSURF SET, BOARD, 2 SAILS, MAST & BOOM, GREAT FOR BEGINNERS & INTERMEDIATES

BIC VELOCE 328 WINDSURF SET, BOARD, 2 SAILS, MAST & BOOM, GREAT FOR BEGINNERS & INTERMEDIATES

COMPLETE WINDSURF SET GREAT FOR BEGINNERS, READY FOR FUN, GREAT CONDITION Complete windsurf set, easy to set up and use. Bic Veloce 328cm board, 68cm wide, very buoyant and stable 185 litres of volume and with a fully retracting centreboard. Great learning platform that's also good for intermediates to learn higher speed turns in stronger winds. Board in excellent condition with only minor wear marks. Board in excellent condition with only minor marks from normal use. Fitted with 4 removable foot-straps, adjustable sliding mast track and connection pin to rig. Rig/sails comprise 2 part mast (435cm Arrows brand 25% carbon content), Bic adjustable boom with clamp-on fitting to mast, Arrows 4.6m2 sail and Bic 5.7m2 sail, adjustable mast extension, Bic mast base and up-haul rope. Both sails have adjustable heads and the monofilm is in excellent condition. The rig parts are all in very good condition with only minor marks from rigging and normal use. Everything works as intended and the set is ready to use. Ad ID: Delivery Service Consumer Credit

Related products pintel mounted mast support for road trailing with holes for lighting board mount: BIC VELOCE 328 WINDSURF SET, BOARD, 2 SAILS, MAST & BOOM, GREAT FOR BEGINNERS & INTERMEDIATES
Lighting board for trailer etc.

Lighting board for trailer etc.

I have used this several times when towing various trailers but no longer have a tow bar so it will not get used again by me. Attaches with a couple of bungee cords (not included) always stored indoors. It was working when I last used it, and have confidence it still works perfectly. Cash on collection preferred due to the size of this item. If you insist on postage, I think it would have to go by courier so the additional cost would be down to the buyer. Ad ID: Delivery Service Consumer Credit

Lighting Board for Cycle Rack

Lighting Board for Cycle Rack

4 Feet Wide Lighting Board for attaching to a rear cycle rack etc. Includes cable with standard electrical connections. Space for Number Plate. Good Condition. Read More

Related products pintel mounted mast support for road trailing with holes for lighting board mount: Lighting Board for Cycle Rack
DSLR Rig Shoulder Mount Movie Kit Support for Video Camcorder Fit Canon Nikon

DSLR Rig Shoulder Mount Movie Kit Support for Video Camcorder Fit Canon Nikon

DSLR Rig Shoulder Mount Movie Kit Support for Video Camcorder Fit Canon Whether overhead, high angel or low angle shot, it allows you to use imagination to your own needs. Being the best DSLR stabilization system! 1x DSLR Rig Multi-function Steady Shoulder Mount Kit. Shoulder Mount. Read full description new in box

Thule lighting board for bike carriers

Thule lighting board for bike carriers

Thule lighting board to go with Thule bike rack avaliable for sale separately. Ad ID: Delivery Service Consumer Credit

Related products pintel mounted mast support for road trailing with holes for lighting board mount: Thule lighting board for bike carriers
Towbar mounted 3 x Bike Carrier for 4x4's with rear mounted spare wheel

Towbar mounted 3 x Bike Carrier for 4x4's with rear mounted spare wheel

4x4 towbar mounted bike carrier for upto three/four bikes. The carrier itself comes in three parts; the fixed towbar mount, which is bolted to between the tow hook and the towbar, the vertical bar (curved so as to avoid the spare wheel) and the twin bar bike mount. The carrier is designed to suit all 4x4 vehicles with a rear mounted spare wheel, such as Freelander's, Rav4's etc. Ad ID: Delivery Services Consumer Credit

Contact