perform 12 inch p specialty moulding bearing guided

PERFORM 1/2 inch P Specialty Moulding bearing-guided

New and wax-sealed in original packaging. 1.75" cutting diameter, 1" cutting length. Cash on collection only. No postage.

New PERFORM 1/2 inch P Specialty Moulding TCT router

New and wax-sealed in original packaging. Cutting diameter 1", cutting length 1". Cash on collection only. No postage.

Perform " TCT Specialty Moulding router cutter...

Perform " TCT Specialty Moulding router cutter, New, wax-sealed in plastic case. 1.75" cutting diameter, 1" cutting length. £, Worthing,.

PERFORM 1/2 inch P Cornice Moulding TCT router cutter

This is a large cutter and must be used in stationary table. Cutting length 2.25", cutting diameter 1.25". Cash on collection only. No postage.

PERFORM " TCT Cornice Moulding Cutter, New....

PERFORM " TCT Cornice Moulding Cutter, New. Stationery table use only. Cutting length 2.25" width , Worthing,.

Trend " Bearing Guided Cove Router Cutter...

Trend " Bearing Guided Cove Router Cutter, New, wax-sealed in foam-lined case. List price is £. The two bearings supplied offer the means of cutting different depths of mouldings. With allen key. £, Worthing,.

American Crafts 12 x 12 Specialty Scrapbook Paper - Pearl -

American Crafts 12 x 12 Specialty Scrapbook Paper - Pearl - 30 Textured Sheets, New American Crafts Speciality Paper - Pearl. " x 12" sheets in 12 Pearl colors and 2 textures. Premium brand papers. New & Sealed. Cash on collection or I can post by Signed for 2nd Class mail for an extra £5 with PayPal payment. Please contact me for an invoice. £, Seaford,.

Bearing shaft Assembly (incl P&P)

2 bearing shaft assys. 1 x 16mm shaft (approx) and 1 x 19mm (approx) both approx 12 inches long. One with a small pulley. Both have seen some use, but are not seized. Paypal accepted. Price includes UK Mainland delivery. Next day dispatch guaranteed. Read more

Orac Decor C800 XTERIO Cornice moulding Decorative moulding

For sale is 62 2 metre lengths of new Orac Decor C800 XTERIO Cornice moulding. Price is for each 2 metre length. Can possibly deliver if not too far.

Orac Decor C800 XTERIO Cornice moulding Decorative moulding

For sale is 2 metre lengths of Orac Decor C800 XTERIO Cornice moulding suitable for interior or exterior. Price is for each 2 metre length. 62 lengths available. Delivery can be arranged.

Bronze Cutless Bearing Housing for 25mm diam Bearing & Shaft, also Inboard Bearing Housing Available

This is a used cutless bearing housing to take a 25mm diameter bearing and propellor-shaft. It is made of cast bronze, and takes a 50mm long bearing, which was rather short for our 1 metre long prop shaft, so we have changed to a 100mm long housing and bearing, which cost over £200. As it is the removable bearing that takes all the wear, it is is fine condition. It will be suitable for a short prop shaft, or a situation where there is not enough room for a longer bearing housing such as inside a rudder aperture on a long-keeler. The inboard end of the casting is threaded for attaching to the stern tube, and the threads are 16 TPinch, or 6 TPcm, and inch diameter on a 1.5 inch diameter tube. The two anti-twist bolt holes are at 4.3 inch, 110mm, centres. A suitable new section of bearing is available at no extra charge. Asking £65 ono I also have available the bearing housing from the inboard end of the same stern tube, with the same thread. Would sell sperately for £65 ono, or together for £120 ono. Buyer collects or I could post it at cost. Ad ID: Delivery Service Consumer Credit

Bronze Cutless Bearing Housing for 25mm diam Bearing & Shaft, also Inboard Bearing Housing Available

This is a used cutless bearing housing to take a 25mm diameter bearing and propellor-shaft. It is made of cast bronze, and takes a 50mm long bearing, which was rather short for our 1 metre long prop shaft, so we have changed to a 100mm long housing and bearing, which cost over £200. It will be fine for a short prop shaft, or a situation where there is not enough room for a longer bearing housing such as inside a rudder aperture on a long-keeler. The inboard end of the casting is threaded for attaching to the stern tube, and the threads are 16 TPinch, or 6TPcm, and inch diameter on a 1.5 inch diameter tube. The two anti-twist bolt holes are at 4.3 inch, 110mm, centres. A suitable new section of bearing is available at no extra charge. Asking £65 ono I also have available the bearing housing from the inboard end of the same stern tube, with the same thread. Would sell sperately for £60 ono, or together for £110 ono. Buyer collects or I could post it at cost. Ad ID: Delivery Services Consumer Credit

Bronze Cutless Bearing Housing for 25mm diam Bearing & Shaft, also Inboard Bearing Housing Available

This is a used cutless bearing housing to take a 25mm diameter bearing and propellor-shaft. It is made of cast bronze, and takes a 50mm long bearing, which was rather short for our 1 metre long prop shaft, so we have changed to a 100mm long housing and bearing, which cost over £200. It will be fine for a short prop shaft, or a situation where there is not enough room for a longer bearing housing such as inside a rudder aperture on a long-keeler. The inboard end of the casting is threaded for attaching to the stern tube, and the threads are 16 TPinch, or 6TPcm, and inch diameter on a 1.5 inch diameter tube. The two anti-twist bolt holes are at 4.3 inch, 110mm, centres. A suitable new section of bearing is available at no extra charge. Asking £65 ono I also have available the bearing housing from the inboard end of the same stern tube, with the same thread. Would sell sperately for £65 ono, or together for £120 ono. Buyer collects or I could post it at cost. Ad ID: Delivery Services Consumer Credit

Perform 10-inch table saw.

This is a Perform FMTCTK table saw complete with stand and extension top. The table measures 63cm x 45cm. The height is 81 cm with stand or 31cms without the stand. The extension, which is not shown in the photo, adds 32cms to the table length. Motor Watts It is complete with parallel and angle guides. It recently had a new blade fitted. It is in the Thisleberry area of Newcastle-under-Lyme. You might also want to look at my other item JCB 10-inch sliding mitre saw. Read More

Perform 10-inch table saw.

This is a Perform FMTCTK table saw complete with stand and extension top. The table measures 63cm x 45cm. The height is 81 cm with stand or 31cms without the stand. The extension, which is not shown in the photo, adds 32cms to the table length. Motor Watts It is complete with parallel and angle guides. It recently had a new blade fitted. A second brand new blade will also be supplied. It is in the Thisleberry area of Newcastle-under-Lyme. Read More

Miss guided playsuit 12

Miss guided pink silk satin playsuit. Been worn twice, in amazing condition, collection only X

miss guided playsuit size 12

size 12 miss guided playsuit new with tags can drop off local or can collect Please look at my other items have been doing a clear out Thanks Ad ID: Delivery Service Consumer Credit

Wolff "Inch Sewing and Craft Specialty Scissors Shears

SKU: wolff194-FE, Wolff "Inch Sewing and Craft Specialty Scissors Shears Trimmers, Stainless Steel, Thread Nippers, From Fly Tying to Buttonholes, Bendable Handles

Miss guided boots brand new £12

Brand new miss guided boots with clear heel lovely boot, size 8 £12 Ad ID: Delivery Service Consumer Credit

Miss Guided Shift Dress Size 12 NEW

Miss Guided Shift dress, violet in colour, size 12, brand new with tags. From a smoke free home, Any questions please don't hesitate to ask! Ad ID: Delivery Service Consumer Credit

Redcat Racing Bearing P

SKU: , Redcat Racing Bearing P

Miss guided skirt with tag £10 Size 12

Miss guided midi skirt with tag Size 12 Never worn Read More

TWO ' AVENIR PERFORM' ADULT ROAD BIKES - 21.5 inch FRAME

Both Bikes include ‘Avenir’ Pannier Rear Racks, Chromoplastic Full Length Mudguards and Zefal Bottle Cages. Key features include: • Lightweight aluminium road frame • Straight blade alloy forks • Shimano 14 speed gears with Shimano STI shifters • Alloy caliper brakes and levers • Deep section alloy rims with front Q/R hub • Schwalbe Racepac 700x23c tyres • Double butted alloy oversize drop bar with A-head stem • Avenir road saddle with alloy micro adjust seat post • Pedals with toe clips & straps NB: Slight dent to handlebars on one of the bikes, otherwise in good condition. Price is for both bikes but will consider selling separately. Ad ID: Delivery Service Consumer Credit

Power Crystals Guided Journal: A Guided Journal to Magical

It is no wonder that crystals have always been regarded as a source of power. Bright and flashy,and impressive no matter what their size,crystals hold an aura of mystery. With Power Crystals Guided Journal, you can work your way through hundreds of crystals,gems,and stones that have been revered and used for healing for thousands of years as well as five exciting,newly discovered stones. Enjoy exploring the history,mythology,and symbolism of the crystal in addition to its

Unusual Bowl Made From 12 Inch L.P Record in Havant

A very arty style bowl made from a John Denver long playing 12 inch record.

Contact

• Next →