peavey power amp xr

Peavey power amp xr

Rack mounted power amp watt very little use in excelent condition very little feed back due to built in function feedback ferret would suit both kareoke or profesional singer. Read more

2 x Peavey Eurosys 500XT XR Peavey Mixer Amp

I'm Selling my P.A it's a great sound but now surplus to requirements as I have purchased some powered speakers and will not need to use this kit again. It can be demonstrated all working and functional with no problems. Great for pub gigs/halls and all average sized venues. I need the space hence realistic price£250 ono Peavey XR Active Powered W Mixer Peavey powered mixer with built in amplifier and hard all-in-one plastic cabinet. This portable, all-in-one powered mixer / amplifier with 8 input channels is ideal for small bands, duo, karaoke bars, venues and school halls. The Peavey XR features new and improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. The Peavey XR- has new graphic equalizers with multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey`s patented FLS (Feedback Locating System). Specifications Total power w Built in amplifiers 2 x 500w RMS (600w program) power at 4 ohms 8 channels with 8 low noise microphone (Low-Z), 6 line level (Hi-Z) and 2 stereo inputs 48 Volt phantom power, 3 band EQ, monitor send and effects send on each channel Signal and Clip indicator on each channel 25 dB pad on channels 1 to 6 Dual Main or Main/Mon power amp mode switc Two 7-band graphic EQs with FLS® DSP based effects with parameter control Channel mute switch 2 x combination Speakon / 6.3mm (1/4") speaker output sockets (The socket accepts either a Speakon or a 6.3mm (1/4") male jack) Rugged plastic case Dimensions (HxWxD): mm) x mm) x mm) Weight: 41.5 lbs (18.9kg) Ad ID: Delivery Service Consumer Credit

Peavey XR mixer amp

Peavey XR mixer amp 2 x 600 watts per channel at 4 ohms. 8 channels with 8 low noise microphone (Low-Z), 6 line level (Hi-Z) and 2 stereo inputs. 48 Volt phantom power, 3 band EQ, monitor send and effects send on each channel. Signal and Clip indicator on each channel. 25 dB pad on channels 1 to 6. Dual Main or Main/Mon power amp mode switch. Two 7-band graphic EQs with FLS®. DSP based effects with parameter control. Channel mute switch. Rugged plastic case. Dimensions (HxWxD): mm) x mm) x mm) Weight: 41.5 lbs (18.9 kg) one graphic slider knob has broken off as shown in photo but good working order and any trial welcome. Read more

Peavey XR Powered Mixer Amp

15 months old Peavey XR powered mixer. Bought from new. Hardly used, hence the reason why I'm selling it. Console style mixer/amp, 12 channels with XLR mic inputs plus stereo line inputs on channels mm faders, 4 band EQ with mid-morph technology, 2 monitor sends, 1 EFX send, pan pot, PFL and Mute switches. Dual 600W @ 4 ohm Class D power amps, 2 combo (Speakon and 1/4") connecters per amp channel, digital EFX (w/footswitch defeat and tap function). Ad ID: Delivery Service Consumer Credit

Peavey XR 400 Mixer Amp

.Excellent Peavey XR h mixer amp. Made in but in great condition and is solid and reliable.Has 4 channels, reverb, 5 band EQ and inputs for auxiliares and effects.Designed obviously for P.A but I've used it effectively for guitar and bass(see also my other ad for Bass Speaker). So, all in all a classic, powerful and versatile amp at a reasonable price. Read More

Peavey XR 600B mixer amp head

Peavey XR 600B Mixer Amp head The amp is working including EQ Built in effects not working but effects can be achieved by using separate effects unit by send and return This amp is sold as seen, can be tried out before buying This is collection only due to the weight. Read More

Peavey Mixer Amp XR 600E in Runcorn

Peavey Powered Mixer AMP XR 600 E REDUCED! Illness forces sale!

peavey xr 696f mixer amp in Corby

peavey 696f mixer amp 8 inputs with effects w 2 x 600 w

peavey xr 696f mixer amp in Corby

peavey xr 696f mixer amp w 2 x 66w 8 inputs with effects

peavey xr 600e power mixer + speakers

Peavey powered mixer with pair speakers Good sound ideal for Dj just starting out or band Can provide leads if required, collection from Stoke on Trent Ad ID:

Peavey PA system / Peavey XR 696 F and Peavey pro 15's

Complete PA system. Peavey xr 696 F Mixer and amp all in one. Very good condition. w Peavey pro 15 x watts speakers? Good condition. Slightly older than the mixer / amp. Small wear in one corner of carpet. As shown in picture. Also comes with Konig and Meyer heavy duty stands. And set of pro power high quality. 10 metre cables. Ad ID: Delivery Service Consumer Credit

Peavey power amp

Perfect condition and working order,manual included.Super reliable,never out rack till now. Currently retails at £489. Stereo Mode: 4 ohms: 500W RMS x 2 Stereo Mode: 8 ohms: 300W RMS x 2 Bridge Mode-Mono: 8 ohms: W RMS Inputs: XLR, 1/4 inch and barrier strip Detented input gain control Binding post and Speakon output connectors Separate Speakon mono bridge output Mode switch for stereo or bridge operation Low-cut filter switch for 40Hz low cut filter Two built-in 150 Hz crossovers. Thru/low output jacks and high output jacks LED indicators for input signal, DDT and power Peavey's famous DDT compression system Frequency Response: 20Hz to 20kHz Rackspaces: 2U Product Dimensions: 57.4 x 15.7 x 53.3 cm Item Weight: 20 Kg

Peavey PV Power Amp

Massive power in a small package, Amp is in V.G.C, and P.W.O. Instruction Manual included The Peavey PV Power Amp is a 2u rackmount unit. 2 x 900W RMS @ 4 ohms, 540W RMS @ 8 ohms, or W RMS bridged mono. XLR, 1/4" and barrier strip inputs with DDT compression system, binding post and Speakon output connectors. Stereo Mode: 4 Ohms: 900 Watts RMS x 2 Stereo Mode: 8 Ohms: 540 Watts RMS x 2 Bridge Mode-Mono: 8 Ohms: Watts RMS Total Harmonic Distortion: Less than Hz to 20 K, 10 dB below rated power in stereo mode both channels driven Inputs: XLR, 1/4 inch, and barrier strip Detented input gain control Binding post and Speakon output connectors Separate Speakon mono bridge output Mode switch for stereo or bridge operation Low-cut filter switch for 40 Hz low cut filter Thru/low output jacks and high output jacks LED indicators for input signal, DDT, and power Peavey's famous DDT compression system Frequency Response: 20 Hz to 20 kHz Damping Factor: greater than 300 Hum and Noise: 100 dB Ad ID: Delivery Service Consumer Credit

Peavey PV Power Amp

The Peavey PV Power Amp is a 2u rackmount unit 2 x 900W RMS 4 ohms 540W RMS 8 ohms or W RMS bridged mono XLR 14" and barrier strip inputs with DDT compression system binding post and Speakon output connectors Read More

IPR Peavey Power Amp

2-channel power amp delivers 530W at 4 Ohms, 800W at 2 Ohms per channel Part of Peavey's IPR Series, the IPR Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The power amp has a resonant switch-mode power supply and a high-speed class D topology that yields the supremely high audio resolution and productivity. The Peavey IPR features two channels with independent, 100Hz crossovers and produces 530W per channel at 4 Ohms, or 800W per channel at 2 Ohms. Peavey's exclusive DDT speaker protection with multi-point clip sampling leads a protection-circuitry suite that also includes DC, Temp, Signal, and Active safeguards, all referenced on the front panel with LED indicators. It also features a variable-speed fan housed in a lightweight aluminium chassis Ad ID: Delivery Service Consumer Credit

Peavey PV- Power Amp

Great Amp, only ever used to power 2 monitors. With all the features and proven reliability you've come to expect from Peavey, the PV- offers serious power and the proprietary DDT distortion detection technique which virtually eliminates distortion. Delivering 500 watts per side into 4 ohms and 750 watts into 2 ohms, this killer amp provides reliable and accurate sound for musicians, DJs, churches, clubs and other music venues. It also features the patented V-cooling design which cools the power transistors more evenly than traditional heat-sink designs. Features: Stereo mode: 4 ohms, 500 watts RMS x 2 Stereo mode: 8 ohms, 300 watts RMS x 2 Bridge mono mode: 4 ohms, watts RMS Inputs: XLR, 1/4 inch and barrier strip Detented input gain control Binding post and Speakon output connectors Seperate Speakon mono bridge output Mode switch for stereo or bridge operation Thru/low output jacks and high output jacks LED indicators for input signal, DDT and power Peavey's famous DDT compression system Total harmonic distortion: less than Hz to 20kHz, 10dB below rated power in stereo mode, both channels driven Frequency response: 20Hz to 20kHz Damping factor: greater than 300 Hum and noise: 100dB Rack spaces: 2 Size: 19"w x 16"d x 3.5"h. Wt. 35 lbs. CASH ON COLLECTION PLEASE IGNORE PAYPAL, ONLY BY PRIOR ARRANGEMENT COLLECTION ONLY, MAY POST, PLEASE ENQUIRE FIRST. ALL QUESTIONS WELCOME, CAN BE DEMO`D Ad ID: Delivery Services Consumer Credit

Peavey PV power amp

Peavey PV power amp watts x2 in perfect working order, £230. Please see my other listings for a top of the range collection of sound and stereo equipment, including some rare items. Ad ID: Delivery Service Consumer Credit

Peavey PV- power amp

Peavey PV- power amp, no box, in perfect working order, £375. Please see my other listings for a top of the range collection of sound and stereo equipment, including some rare items. Ad ID: Delivery Service Consumer Credit

Peavey IPR power amp

Up for grabs is one peavey IPR power amp. I have two for sale. Heres the blurb. Peavey IPR Power Amplifier Specifications: 530W RMS x 2 at 4 ohms. 900W RMS x 2 at 2 ohms. Two independent crossovers. Combi 1/4"/XLR inputs. Neutrik Speakon Combo 1/4" outputs. Weight: 6.2 lbs. used but in perfect working condition. I have two for sale. The flight case is sold. Postage would be £8.00 Any question,please ask, [Item is in Doncaster if you should want to pick it up] Read more

PEAVEY P POWER AMP

Used but in perfect working order. Only used for small venue dj work. All the features and proven reliability. The PV® features DDT™ distortion detection technique virtually eliminating distortion. It also features Peavey's patented Turbo-V™ cooling design, which cools the power transistors more evenly than traditional heat-sink designs. Features Two built-in 150 Hz crossovers500 watts (rms) per channel at 4 ohms300 watts (rms) per channel at 8 ohmsSeparate Speakon® mono bridge outputTwo-speed demand-sensitive fan2-rack-space stereo power amp featuring DDT protectionWeight Unpacked: lb( kg)Weight Packed: lb( kg)Width Packed: cm)Height Packed: cm)Depth Packed: cm) Ad ID: Delivery Service Consumer Credit

Peavey ipr w power amp

Peavey IPR watt power amp very flexible amp can be used with Bass or top end speakers or a combination of both. X.l.R & jack connection. Hi pass full range Sub selector switch for each channel. As new condition genuine reason for sale. Ad ID: Delivery Service Consumer Credit

PEAVEY CS PA/DISCO POWER AMP

PEAVEY CS PA/DISCO POWER AMP THIS IS A BEAST OF AN AMP ITS DONE LOTS OF WORK AND STILL WORKS ITS IN ROUGH COSMETIC CONDITION CAN BE SEEN WORKING BEFORE YOU BUY 550 REAL WATTS INTO 4 OHMS PER CHANNEL BUILT IN COMPRESSION SYSTEM TO AVOID CLIPPING AT MAX OUTPUT £45 SOLD AS SEEN Ad ID: Delivery Service Consumer Credit

Peavey CSH Power Amp in Sheerness

Here for sale i have a fully working peavey amp CSH. These are still selling for over a £ Each. Grab a bargain due to band retiring. Also i do have another same as the above listed that works but only in mono and not in stereo if interested. please see seperate listing. This will be an asking price of £350 due to this.

Peavey pv power amp and speakers

Great and and speakers Ad ID: Delivery Service Consumer Credit

2 Peavey Speakers & Power Amp in Southminster

Nearly new ST-15s Very Good Condition 2 speakers 300 watts, 8 ohms, 1 power amp - Peavey 900 and all leads.

Contact

• Next →