Large Single phase Power Supply Unit Battery charger PSU
This unit is made by Legg Industries of Wolverhampton in the late s and was installed in a school laboratory as a power supply to distribute low voltage AC/DC to the benches. It has been used as a 12V battery charger for some time. Input V single phase @ 50cps Output 0V to 14V AC/DC maximum 40A Output 14V to 18V AC/DC maximum 32A Still in working order for AC output, but trips the on/off at higher DC voltages (see photos of multi-meter showing outputs), also the AC input amps meter is stuck at full scale deflection. Other controls and meters are working ok. Ventilation holes on the top with a little surface rust (cosmetic). There are 6 mounting holes at rear for bolting to a wall (see photos). Long 4.2m power cable attached with 13A plug. Two 50mm wheels (rear) & two 50mm castors (front) for easy movement. Dimensions 26in high x in wide x 16.5in deep (19.5in over switch) ie 66cm high x 58cm wide x 42cm deep (50cm over switch) This PSU is very heavy at an estimated 50kg therefore collection is recommended Alternatively, delivery arrangements can be made by the purchaser at their own cost. Arrangements to view can be made if desired.