Current slide 1 of 1- Best-selling in Lawn Mower Parts
Current slide 1 of 1- Save on Lawn Mower Parts
These are high quality, and I couldn’t tell much of a difference in handling. They also took grease just fine. You will need the bushings out of your old wheels.
Verified purchase: Yes | Condition: New
Love the tires , they are supposed to be 5 in wide when they are about 5 & 3/8 inches . I had to remove the bearings and cut off material from each side ,reinstall the bearings before they would for in my casters on my zero turn mower . I'm fully equipped to do these things as I'm a master mechanic though many want be able to do this on their own .
Verified purchase: Yes | Condition: New
These arrived very fast and were super easy to put on. Total time to take off the old tires and mount these were around 10 minutes. Now I don't have to worry about flat tires or low air pressure anymore.
Verified purchase: Yes | Condition: New
perfect size and fit, was told how good they were by my son and after constant flats and pumping up tires before each use i decided to change to the air-less tire, best move i ever made,would recommend it to everyonr with zero turn mowers
Verified purchase: Yes | Condition: New
I bought this tire to replace the caster wheels on my 48" Scag zero-turn mower. They are a little taller, despite being listed as the same size wheel, but fortunately they still fit in the wheel fork. What I didn't expect was that the wheels do not have bearings, only bushings, so I expect given the heavy use and sandy soil here, the bushings will probably wear out before the wheel does. I will keep them well greased, so hopefully that will help. If these wheels had bearings, they would be a perfect replacement.
Verified purchase: Yes | Condition: New
I had been having issues with the front tires going flat and running off the bead. It was a constant headache. I ordered these and installed them and WOW what a difference. I NEVER have to worry about a flat again. Very economical but not cheap quality. A lot less than replacing the stock tires over and over. HIGHLY recommended !
Verified purchase: Yes | Condition: New
Great deal, was a 1/4 inch to wide for my craftsman zero turn, but after a little modifying fit great. would buy again for another mover. Hope this helps you decide, remember no Flats when you get ready to cut your grass.
Verified purchase: Yes | Condition: New
The size advertised and the size stamped on the tire IS correct but when I got home and tried putting them on, way too big!! Even measured with my own tape measure and they are way bigger than what is labeled on the tire. Then to top it off, I had to pay $21 in shipping to return them! Not shopping at this place again.
Verified purchase: Yes | Condition: New
You will need to tap the lip bearings out and grind the hub down about 1/4 inch on each side, file the minimal excess metal out of cavity, then tap the bearings back in. It will fit the 50 RZT then and do very well. I would rate it higher if installation did not require tools and skills that some people might not have available. Otherwise, the wheels look like they will last for many years.
Verified purchase: Yes | Condition: New
They fit perfect and worked great.
Verified purchase: Yes | Condition: New