norman 18 project boat

Norman 18 Project Boat

Norman 18 boat for sale comes with 15hp outboard engine, remote control gear and steer. Needs paint and cushions. Read More

Norman 18 shell, boat, project

Norman 18 shell. Just the shell. Nothing else. Twin trailer available separately not in pictures. Seems water tight. Ad ID: Delivery Service Consumer Credit

Norman 23 boat, project, Honda

Norman 23 with Honda 15hp. Boat safety for another year. It has a thames license. Currently moored on upper thames near Oxford(no mooring available) but loads available upstream. Had out water last year. It been my project but haven't got any time no more. Inside needs finshing. Any more information please text or phone (leave a message if not answered) on . Please do not email me fed up of time wasters Ad ID: Delivery Service Consumer Credit

Norman 20' day boat - project

Norman 20' day boat. Unfinished project (due to time and a new baby!). Good, solid hull, stripped inside and ready for paint and refit. Inside has. Even painters with red bilge paint. The boat is sat on a braked twin-axle trailer with 4 nearly new tyres. No engine. This would be a fantastic little project for someone who has a bit of time to do this boat up and make it good again. Also included if required are 2 large sheets of aluminium chequer plate for flooring. Open to reasonable offers. Can deliver if required for cost of fuel. Ad ID: Delivery Service Consumer Credit

Norman 20’ River Cruiser Boat Project

20’ Norman River Cruiser Boat Project. Hull is kind and floats, The rear canopy was new a few years ago and hardly used since. Inside needs renovating and the outside needs a good clean up. Has steering ready to take an outboard.

Norman 18.5 boat on trailer

Norman 18.5 boat,just been anti foul painted,comes with a good towable trailer,good condition canopy,comes with a toilet and cooker but has no engine,but the cables for controls,hence the price

BOAT Norman 18 ft Cabin Cruiser

Norman 18 ft displacement cruiser with center keel so has excellent stability in all conditions,suited for Canal, Loch or Sea,sitting on braked trailer with leaf spring suspension for smooth towing. Trailer can be adjusted to take boats fro 17 ft to 21 ft and has new easy recovery winch. Powered by 25 hp Johnson Seahorse with Suzuki 4 hp 4 stroke aux. Comes with complete canopy in very good condition,inflatable dinghy,boarding ladder, ship to shore portable radio,cooker,sink and toilet,fitted out for 12 and 240 volt supply,2 x anchors with chain and warp,4 adult life jackets self inflating,new battery and control cables and aux battery,Zero feedback steering,Electric boat mover, full set of fenders,bilge pump,2 x 25 lt built in fuel tanks with 2 x 20 lt metal Jerry cans, Loch Lomond registered and fees paid to . Boat always stored in secure under cover unit 25 mins drive from Loch Lomond Lots of other bits and bobs. Reason for sale,after 40 years of boating, time for something different. Price can be reduced by subtracting the cost of Aux Engine, Electric boat mover and Dinghy if not required. Ad ID: Delivery Service Consumer Credit

18 foot LOUGH NEAGH FISHING BOAT PROJECT £

I HAVE A BEAR HULL READY FOR FITTING OUT IT TAKES A INBOARD ENGINE OR CAN BE ALTERED FOR OUTBOARD, ITS,17ft 4" LONG X 6ft 4" WIDE 2ft DEEP TRANSOM 2ft 3" cuddy 6ft x4ft floor to head 53", GOOD PROJECT FOR SOMEONE Read More

free 18 foot restoration project boat in Darlington

Large boat 18 foot long restoration project boat must have trailer for collection

18 ft micro gem sailing boat project inc mast sails outboard

For sale is a 18ft retractable keel 8ft beam sailing boat Sold as a project. Started to revamp last year with being painted and sourcing parts but ran out of funds to complete. For sale either with the project or possibly separately is: 4hp mariner outboard 20ft (ish) mast main sail (23.5 x 10.5 feet) and jib (14 x 7.5 ft) Trailer (needs repair) The trailer the boat is currently on is unfit for long distance travel so the boat would have to be transferred to another trailer. This could be done at a slip way nearby. The trailer would be usable after repair. Open to offers for all items listed either together or separately Read More

18 ft micro gem sailing boat project inc mast sails outboard open to offers

For sale is a 18ft retractable keel 8ft beam sailing boat Sold as a project. Started to revamp last year with being painted and sourcing parts but ran out of funds to complete. For sale either with the project or possibly separately is: 4hp mariner outboard 20ft (ish) mast main sail (23.5 x 10.5 feet) and jib (14 x 7.5 ft) Trailer (needs repair) The trailer the boat is currently on is unfit for long distance travel so the boat would have to be transferred to another trailer. This could be done at a slip way nearby. The trailer would be usable after repair. Open to offers for all items listed either together or separately Ad ID: Delivery Service Consumer Credit

23ft Norman Cruiser project

This boat has to go ! It is a 23ft Norman Cruiser hull and superstructure (no engine). In reasonable condition. It sits on an unroadworthy trailer which is good for the boat to sit on whilst working on it. Both must be transported away on a suitable Hiab or Crane Assisted vehicle. Read More

23ft Norman Cruiser project

I purchased this Cruiser as a winter project BUT my landlord says it must go !! Such a shame but I do not have any alternative. Hull and superstructure are in good condition although there is a slight leak on the superstructure somewhere. Also hull has 2 small cracks on the stern - easy repair. Will need a complete refit but these boats fetch amazing prices when restored (£). it is on a four wheel trailer which is NOT roadworthy and so must be lifted away complete. Read More

Ring Speed Boat 20ft V8 Inboard Project Boat

Ring Speed Boat - Bought as a Ring Extreme 21 but since been told it is a Ring 20. Paid £6k for it as a shell with electric and engine but no finishes, thousands spent on it but due to bereavement has sat since and has deteriorated. Letd get the bad bits out the way - The engine appears seized so either needs complete overhaul or new engine?? The wood around the engine cover has rotted and needs replacing. Some of the paint has cracked altho only noticeable up close. The wood on top of the trailer is ok for now but needs replacing. There is some cracking where the Volvo Penta is sealed onto the boat Good bits Tyres all look ok (one was bad but I have just replaced it in August for a new one) Everything was totally stripped out and replaced. I'm sorry I do not know much about boats - including this one. I have a pile of receipts inc all new eyes, Stainless Vents, Fuel Primer Bulb Pump, Oil filter, Battery cables, Ocean Water bilge pump, fuse box, Battery isolators, Stainless Steel Wheel, Battery Terminals, Fire Resistant Marine Hoses, Horn Switch, Heater Hoses, Bilge Water Alarm, Bucket Seats, Alternator, Boat Fenders, Braided Fuel Hose. New sound system and fully trimmed in white and blue, matching ball things that protect the sides (sorry I have no idea what they are called), It really is a beautiful boat and always gets comments. It needs some TLC but would be a perfect winter project ready for next year. Video available - please send me your email as you are not allowed to put links on ads. Any questions please ask. It is priced taking all of this into account so with all due respect please no time wasters. Read More

BOAT PROJECT - 21 FT CLINKER WOOD BUILT BOAT

COMPLETE WITH TRAILER AND ENGINE BOAT HAS NEW PLANKS ON PORTSIDE NEEDS FINISHING ON STARBOARD SIDE SOME PLANKS SUPPLIED WITH BOAT. 4 WHEEL HEAVY DUTY BOAT TRAILER TO BE ADAPTED FOR THE BOAT. BUKH DV 20 MARINE DIESEL ENGINE WITH NEW PARTS JUST FITTED CONTACT P.O.A

45' STEEL NARROWBOAT PROJECT BOAT NEEDING WORK BARGE BOAT SA

FOR SALE 45' STEEL NARROW BOAT PROJECT RARE OPPORTUNITY! IDEAL FOR D I Y ENTHUSIAST! BELIEVED TO HAVE BEEN BUILT BY THE RESPECTED HARBOROUGH MARINE OF MARKET HARBOROUGH AROUND . THIS IS AN ALL STEEL NARROWBOAT. THIS CRUISER STERN NARROW BOAT HAS JUST BEEN FULLY OVERPLATED AS REQUIRED BUT DUE TO CERTAIN DRAIN HOLE MISCALCULATIONS, HAS TAKEN ON WATER AND SUNK. THE VESSEL SPORTS A 3 CYLINDER 17HP YANMAR DIESEL INBOARD ENGINE AND IS CURRENTLY STORED ON THE HARD STANDING READY FOR ANY INSPECTION BUT CAN BE RE-FLOATED AND MOTORED AWAY. THE VESSEL IS CURRENTLY STORED AT A LANCASHIRE BOAT YARD AND MAY, BY ARRANGEMENT, BE WORKED ON WHERE IT IS. THERE IS A CRANE ON SITE IF YOU WANT TO TRANSPORT IT AWAY. COST OF LIFT AROUND £120 + VAT. HELP WITH TRANSPORT AVAILABLE. ANY INQUIRIES, OR TO ARRANGE TO VIEW, PLEASE PHONE: PAYMENT: CASH OR BANK TRANSFER ON COLLECTION. N.B. INTERIOR PICTURES WERE TAKEN PRE-INCIDENT AND ARE INDICATIVE OF THE GOOD LAYOUT. Read More

FISHING BOAT, DAY BOAT ON ROAD TRAILER GREAT EASY PROJECT

PLYMOUTH PILOT FISHING BOAT STRONG GRP HULL AND CUDDY 15FT LONG 5FT WIDE EXCELENT RARE PROJECT, THESE WEE BOATS DONT COME UP FOR SALE OFTEN BUT I DONT HAVE THE TIME I HAVE TWO JOBS, SOLID HULL WITH A DEEP CENTRAL KEEL AND TWO OUTER METAL KEELS WHICH WILL HELP KEEP THIS BOAT VERY STABLE IN THE WATER IT COMES WITH STEERING AND NAV LIGHTS, SITS ON A ROAD TRAILER THE WHEELS AND TYRES, WHEEL BEARINGS AND HUBS ARE IN GREAT WORKING ORDER WILL GET YOU WHEREVER YOU NEED TO GO GREAT PROJECT FOR SOMEBODY, WONT TAKE MUCH AT ALL ITS BEEN KEPT UNDER COVER AS I WANTED IT DRY INTENDING ON DOING THE WORK REQUIRED PRICE IS NEGOTIABLE TRY ME Ad ID: Delivery Service Consumer Credit

FAST FISHING BOAT 20FT KINGFISHER MK 2, BOAT ONLY PROJECT

Kingfisher MK2 cabin cruiser boat 20ft boat, in need of TLC. Its a project! Boat only, no outboard, no trailer. An original KINGFISHER MK2, 20ft which needs love and TLC. The forward cabin has twin bunks, with storage underneath, so you could easily overnight, or the family could shelter when the weather is bad. Cabin has a hinged door, to keep out the bad weather The boat needs TLC, but the boat is solidly built and you will end up with an excellent "Fast Fishing boat" or a very useful family motor boat when finished. There is no trailer or engine with this boat, but I do have a suitable sized snipe trailer available, if you need a trailer. for more info Ad ID: Delivery Services Consumer Credit

33ft project broads cruiser boat widebeam retro houseboat liveaboard amazing boat

Boat for sale Great project boat 33ft very wide A beautiful retro broads cruiser It is a bit of a project  However is a good solid boat! The pics are awful as you can see there is a crack in camera I will try to upload better pictures asap...... I brought this as a project about 6 months ago And I have started the majority of the work.... I have completed the main structural jobs.... Such as  Cut and remove 90% of the reinforcing timbers, which are fibreglassed into the bottom of the hull.  To give it more rigid strength. So I Grinded all the inside of the hull and fitted brand new timbers and cross beams  and fibreglassed them back into the hull.... Which was a filthy job and got through a lot of materials.... Over £350 on epoxy alone... The original timber floor in the wheelhouse had rotted and collapsed, and the timber floor in the aft cabin had also rotted... Front sections are in small panels and are in good condition. All rotten broken timbers and floor were replaced with good quality ply And fitted with all new timber bearers.... Front of the boat still has the large double bed at the bow. Which converts to two singles. Also has its original dining seats and table. Which convert to another double bed. Also has a toilet and stainless steel wash hand basin. Then you go up 2 steps  Into the wheelhouse.... Which is very spacious with a removable roof  Which would make a lovely dining room and plenty of space to seat 8 people spaciously ........................ All original dials and controls are all still fitted to the boat  Although I exspect the condition of it is very poor  Down another 2 steps  Into the aft cabin  Which is a lovely spacious double cabin  Which would give you plenty of seating space plus king size bed..... With also plenty of room for storage And bedside sink unit and wardrobe... Further back from this in a separate sealed compartment is the engine room Which originally held two Perkins Diesel engines  On outdrives  These had been removed along time ago..... Therefore I was going to convert the rear transom to a outboard mounting as you have a 4 knot speed limit up most rivers and inland water ways.... So running two inboard Diesel engines would be costly and pointless.... By fitting the outboard it would be much easier to maintain much easier to convert  This would also be completely silent inside the boat And you would gain 5ft long by full beam of the boat of very good usable storage space........ Therefore you would have more room for water tanks storage tanks  Boat washing machine freezer etc......... Access to engine room is via 2 massive hatches on the rear deck of the boat..... Which you then step down into the engine room  Hatches are not in photos but I do have them !!!!! I just took them home to do a small repair which has been done to them... The water in engine bay has been there a week  Due to tarp blowing off All together it is a great boat  Just needs finishing off  Needs bed in rear cabin finishing off  Seating area making in wheelhouse  New galley fitting Rest is just paining cleaning and millions of odd jobs  Just to summarise  Boat is 33ft  Wide beam Boat has a removalable wheel house roof which is ultra light weight designed for going under bridges Boat has aft cabin Boat is designed as a 6 berth Which you could make more if you design wheel house correctly  Boat has large separate engine room no noises or smells into rest of boat Bags of storage space Boat is made of thick fibreglass.... With all new strengtherning fibreglassing Has all opening windows Has toilet and wash basin with room for shower Has cushions up front Boat has large forwards hatch Large aft cabin hatch Hatch lid missing on aft cabin but easy to make.... As for engine you can easily fit two new engines with outdrives Boat is very cleverly designed so that the engine room is in 3 separate bays...... So you can have twin engine  Or single engine  As I said I was gonna make into outboard..... Please note boat is being sold  As is........... As a project! All pics have just been taken today although don't do justice If you wish to view boat your more than welcome  I will need a little notice  Also if you live on the mainland I do no the number of a amazing haulage company....... Who can move boat as very competitive prices I'm happy to pass details on....... For you to arrange with transport company........ I am happy to accept PayPal Bank transfer Or cash on collection.............. I'm on the Isle of Wight I live approx 10 mins from boat.... Any questions feel free to ask Grab a bargain  This is a lovely boat  90% is dirt and cosmetics  Would make amazing liveaboard or canal cruiser  I'm just sorry I cant do it myself due to other commitments  px swap  No time wasters please..... UPDATE............................. I ORIGINALLY FORGOT TO MENSION THAT I HAVE A FULL STAINLESS STEEL HANDRAIL WHICH GOES AROUND THE WHOLE OF THE BOAT  WHICH IS IN PERFECT CONDITION AND IS INCLUDED IN THE SALE OF THE BOAT AND IS ORIGINAL TO THE BOAT ITSELF.... I also have a large water tank and a very nice gas oven fuel filler and various other items  which I brought for the boat which I will chuck in FREE I'm looking for £950 Ad ID: Delivery Service Consumer Credit

14 foot project boat with trailer selling due to a bigger boat

Selling sue to getting a bigger boat so got no where at home to store so its had to be laid up else where project boat with trailer no engine outside has no holes Init but inside the boat needs work doing but floor is ok inside just need getting rid of as got no time or space to do it Ad ID: Delivery Services Consumer Credit

PRICE DROPPED 33ft project broads cruiser boat widebeam retro houseboat liveaboard amazing boat

Boat for sale Great project boat 33ft very wide A beautiful retro broads cruiser It is a bit of a project  However is a good solid boat! The pics are awful as you can see there is a crack in camera I will try to upload better pictures asap...... I brought this as a project about 6 months ago And I have started the majority of the work.... I have completed the main structural jobs.... Such as  Cut and remove 90% of the reinforcing timbers, which are fibreglassed into the bottom of the hull.  To give it more rigid strength. So I Grinded all the inside of the hull and fitted brand new timbers and cross beams  and fibreglassed them back into the hull.... Which was a filthy job and got through a lot of materials.... Over £350 on epoxy alone... The original timber floor in the wheelhouse had rotted and collapsed, and the timber floor in the aft cabin had also rotted... Front sections are in small panels and are in good condition. All rotten broken timbers and floor were replaced with good quality ply And fitted with all new timber bearers.... Front of the boat still has the large double bed at the bow. Which converts to two singles. Also has its original dining seats and table. Which convert to another double bed. Also has a toilet and stainless steel wash hand basin. Then you go up 2 steps  Into the wheelhouse.... Which is very spacious with a removable roof  Which would make a lovely dining room and plenty of space to seat 8 people spaciously ........................ All original dials and controls are all still fitted to the boat  Although I exspect the condition of it is very poor  Down another 2 steps  Into the aft cabin  Which is a lovely spacious double cabin  Which would give you plenty of seating space plus king size bed..... With also plenty of room for storage And bedside sink unit and wardrobe... Further back from this in a separate sealed compartment is the engine room Which originally held two Perkins Diesel engines  On outdrives  These had been removed along time ago..... Therefore I was going to convert the rear transom to a outboard mounting as you have a 4 knot speed limit up most rivers and inland water ways.... So running two inboard Diesel engines would be costly and pointless.... By fitting the outboard it would be much easier to maintain much easier to convert  This would also be completely silent inside the boat And you would gain 5ft long by full beam of the boat of very good usable storage space........ Therefore you would have more room for water tanks storage tanks  Boat washing machine freezer etc......... Access to engine room is via 2 massive hatches on the rear deck of the boat..... Which you then step down into the engine room  Hatches are not in photos but I do have them !!!!! I just took them home to do a small repair which has been done to them... The water in engine bay has been there a week  Due to tarp blowing off All together it is a great boat  Just needs finishing off  Needs bed in rear cabin finishing off  Seating area making in wheelhouse  New galley fitting Rest is just paining cleaning and millions of odd jobs  Just to summarise  Boat is 33ft  Wide beam Boat has a removalable wheel house roof which is ultra light weight designed for going under bridges Boat has aft cabin Boat is designed as a 6 berth Which you could make more if you design wheel house correctly  Boat has large separate engine room no noises or smells into rest of boat Bags of storage space Boat is made of thick fibreglass.... With all new strengtherning fibreglassing Has all opening windows Has toilet and wash basin with room for shower Has cushions up front Boat has large forwards hatch Large aft cabin hatch Hatch lid missing on aft cabin but easy to make.... As for engine you can easily fit two new engines with outdrives Boat is very cleverly designed so that the engine room is in 3 separate bays...... So you can have twin engine  Or single engine  As I said I was gonna make into outboard..... Please note boat is being sold  As is........... As a project! All pics have just been taken today although don't do justice If you wish to view boat your more than welcome  I will need a little notice  Also if you live on the mainland I do no the number of a amazing haulage company....... Who can move boat as very competitive prices I'm happy to pass details on....... For you to arrange with transport company........ I am happy to accept PayPal Bank transfer Or cash on collection.............. I'm on the Isle of Wight I live approx 10 mins from boat.... Any questions feel free to ask Grab a bargain  This is a lovely boat  90% is dirt and cosmetics  Would make amazing liveaboard or canal cruiser  I'm just sorry I cant do it myself due to other commitments  px swap  No time wasters please..... UPDATE............................. I ORIGINALLY FORGOT TO MENSION THAT I HAVE A FULL STAINLESS STEEL HANDRAIL WHICH GOES AROUND THE WHOLE OF THE BOAT  WHICH IS IN PERFECT CONDITION AND IS INCLUDED IN THE SALE OF THE BOAT AND IS ORIGINAL TO THE BOAT ITSELF.... I also have a large water tank and a very nice gas oven fuel filler and various other items  which I brought for the boat which I will chuck in FREE IVE DROPPED PRICE iM LOOKING FOR £600 Ono as want sold No time wasters please...... Ad ID: Delivery Service Consumer Credit

Caprice 19' sailing boat, regularly used, ready to sail (not a project boat)

Our much-loved Caprice MKIII is for sale. She's been a perfect boat for us to learn to sail on between Chichester, the Witterings and the Isle of Wight. We're selling because we're upgrading to a bigger family boat, so more of us can sail together. Moored in Chichester, Hants. Length: 19ft (5.79m) GRP/fibreglass hull - recent anti-fouling in March Draft (max): m Rig type: Fractional sloop Year built: Twin bilge keel 2 stroke Yamaha outboard engine 2 berths (officially 3, but 2 comfortably) Upholstery in good and clean condition Small gas cooker Varnished interior plywood Sails included History: Originally designed by Robert Tucker. First built in in marine ply but our Caprice III round-bilged fibreglass version was built some time later. An earlier plywood version of the Caprice (the MK1 'Shrimpy') famously sailed around the world. Please call to arrange a viewing. Ad ID: Delivery Service Consumer Credit

Norman cruiser boat

Norman cruiser boat,just been anti foul painted,good fold down hood,toilet room,there is no engine but the throttle and gearchange mechanism is there,the trailer is included and you can tow it home

Norman 20 boat

Norman 20 comes with brand new trailer, mariner 9.9 outboard Read More

20foot boat on trailer everything there to make a nice fishing boat, unfinished project.

Hi Unfinished project, needs a new cab build from marine ply or removed altogether. It is a solid hull and outdrive. the engine is ford pinto with petrol tank. Engine is needing the starter motor fitted along with Sea water pump which is all there. It needs new battery the battery that is there no longer holds a full charge. Any questions call ask for Dave Ad ID:

Contact

• Next →