myford ml7 metal lathe in telford

myford ml7 metal lathe in Telford

MyFord ml7 in great condition I'm only selling it as I have moved to a smaller house and have nowhere to put my much-loved lathe, its sat under a tarp in the backyard so rather than let it go to ruin ive decided to sell it, everything is tight as it should be no missing teeth on the gears,the beds in good condition its been looked after, it comes with 11 extra change gears a Dewhurst fwd n RVs +safty on and of switch+myford rear toolpost two MyFord chucks 6in+4in on back plate two chucks for the tailstock a center + oil can + oiler for the lathe+quick change toolpost 2holders what you see in the pics is what you get this will make somebody a great lathe.collection only to heavy to post thanks for looking !!!

Myford ML7 Metal working Lathe, Myford ML7 modern small...

Myford ML7 Metal working Lathe, Myford ML7 modern small screw cutting Lathe.Distance between centres volt motor, complete with accessories. Mounted on a drip tray and cabinet. excellent condition. £, Horsham, .

Myford ml7 metal lathe...

Myford ml7 metal lathe, Myford ml7 metal lathe for sale with lots of bits very nice lathe perfect working order four jaw chuck vertical slide can be seen working ready to use please call for more details thanks £, Bristol, .

MYFORD ML7 metal working lathe

MYFORD ML7 LATHE In good working condition. Recent PAT test. Genuine Myford cabinet. Lots of accessories.

Myford ML7 metal lathe 240v with extras bench mounted

An excellent condition Myford gapbed lathe greatly sort after with a 3 jaw self centring chuck int and ext jaws, 4 jaw independent chuck, quick change tool post, set of screw cutting gears, 1/2" drill chuck, centre for the tailstock, etc. Single phase 240v. Any questions or to view please phone ... (click to reveal full phone number) located in Bexhill Now reduced price

Myford ml7 lathe + Myford stand...

Myford ml7 lathe + Myford stand, Myford ml7 lathe + Myford stand comes with forward and reverse switch + oiler lathe in good condition and working order. £, Brighton, .

MYFORD ML7 LATHE

Excellent condition, 3 jaw and 4 jaw chucks, vertical slide, changewheel set lathe has had low usage and is in very good condition Read More

MYFORD ML7 LATHE...

MYFORD ML7 LATHE, Myford ml7 lathe totally refurbished complete with new single phased motor comes with various tools and 2 new sets of cutters and comes with a dewhurst reversing switch can be seen working. £, Lydney, .

myford ml7 lathe

Selling a very nice Myford ml7 lathe which had been well looked after with plenty of tlc and is a great example of this popular machine. It comes with Fixed steady 7"face plate Tail stock chuck Revolving centre Full set change gears Tail stock die holder And a few turning tools Any questions please ask

MYFORD ML7 LATHE

Excellent condition, 3 jaw and 4 jaw chucks, vertical slide, changewheel set lathe has had low usage and is in very good condition Read More

myford ml7 lathe

For sale is a Myford ML7 metal working lathe and stand. Included in the sale is a Dewhurst switch (not wired in). The lathe comes with 2 chucks, vices, centre tool and various other items. I purchased this Lathe a couple of years ago with the idea of teaching myself how to use it. Sadly it has remained unused ever since I bought it. It uses a 13 amp supply and is currently wired up and working.

Myford ML7 lathe

Engineering lathe in excellent condition with stand and many accessories Read More

Myford ml7 lathe and accessories in Stoke On Trent

Nice little lathe, screw cutting and all the bits and cutters you need!

Myford ML7 Steel Turning Lathe....

Myford ML7 Steel Turning Lathe., Myford ML7 steel turning lathe. Ser. No. K Volt supply, including switch gear. On a green painted steel cabinet. Extras: 4 jaw Bernerd chuch 150mm, faceplate, work steadies, various running centres, new and sharpened tool steel, slocombes, slitting saws, also included, some new endmills etc. Condition. Not a great deal of useage. Totally rust free. and well cared for. £, Peterborough,.

MYFORD ML7 LATHE FOR SALE

Myford ML7 Lathe For Sale Has been used for many years in domestic / hobby application - to include accessories. Based in Ayr. Call for more information. TM Ref: -01 Read More

Myford ML7 Lathe with chucks etc.

Myford ML7 Lathe, Still in use and can be seen working I have had this lathe for 15 years and only used for light hobby work, Comes with one three jaw chuck, one four jaw chuck, one tailstock chuck, one face plate and the original Myford base stand. Recently fitted with new drive belts and grease nipples. Read More

Myford ML7 lathe complete VGC, 3&4 jaw chucks, faceplate,...

Myford ML7 lathe complete VGC, 3&4 jaw chucks, faceplate, tailstock accessories etc sitting on a purpose built stand all VGC Bexhill £, Bexhill-On-Sea, .

Myford Lathe ML10 (Metal lathe) in Guildford

Myford ML10, used condition, forward and backwards motor however the motor is underpowered for the machine. Has a new lead screw clutch fitted. Comes with some change wheels (see photo) Face plate. 3 jaw chuck. Lathe Manual Serial No.

myford ml 10 metal lathe

MYFORD ML10 LATHE EXCELLENT CONDITION FORWARD AND REVERSE.THREAD FEED CLUTCH.BARNERD 4IN 3 JAW CHUCK. MYFORD 6 IN 4 JAW CHUCK 4 IN JAW CHUCK NEW MOTOR. QUICK. CHANGE TOOL POST Read more

Myford ML7 Tailstock Handwheel in St. Austell

Item in good condition with no apparent signs of wear. Reasonable offers will be considered, buyer to pay postage.

MYFORD BENCH MOUNTED METAL WORKING LATHE WITH VARIOUS

MYFORD BENCH MOUNTED METAL WORKING LATHE WITH VARIOUS TOOLS, Myford Bench Mounted Metalworking LatheBelt driven with 3 speedsMotor includedThere is a box with various toolsIncluding Dividing Head plate set, collet setSingle phase motor. £, Leeds,.

Myford ML " x 19" BGSC Metal Turning Lathe with

Myford lathe in nice condition with 3 jaw and 4 jaw chucks, various gear wheels, drill chuck and measuring instruments etc. 1 phase 240 volt electrics forward and reverse with clutch to make turning easier on makers stand with drip tray and raised blocks has been professionally repainted owned by family member ex toolmaker for over 20 yrs. In no hurry to sell looking for asking price if you don't need measuring instruments can do it £50 cheaper. This is far superior to any modern Chinese lathe might not look as pretty though. Study photo's to see condition not an abused one.

Myford ML7

I’m selling my Myford ML7, it’s used (obviously) but a nice tidy thing in good order. It’s single phase and imperial. Its got a decent three jaw chuck on it. It doesn’t come with the qr toolpost in the picture but will come with a toolpost ready to use. It’s mounted on a flat piece of wood with a small control box for on, off and reverse. I’m looking for £650 which I think is sensible. I can chuck a few bits of tooling in to get you going too. Read more

Lathe: Myford / Drummond with Myford stand...

Lathe: Myford / Drummond with Myford stand, Pre ML7 Myford lathe with selection of change wheels, 3 jaw and 4 jaw chucks, face plate and other attachments.On Myford stand, itself alone worth £350.A good solid machine, ideal for serious engineers and previously owned by a respected craftsman.Currently in storage and needs a new home soon as the space is required. Showing a little surface rust that doesn't affect the integrity and quality of the machine.Please give me a call or an email to arrange a viewing.Advertised on other sites. Serious offers considered. £, Bournemouth,.

myford Steel turning Lathe, lathe on original stand...

myford Steel turning Lathe, lathe on original stand manufactured approx 35 years is in good working order.3 jaw chuck andface plate £, Llanelli, .

Contact

• Next →