dbx iEQ-31 Equalizer/limiter with TYPE V NR & AFS
one slide knob has been replaced. dbx iEQ-31Ā not only includes two 31-band channels of 1/3-octave equalization but it also gives you +12 dB input gain range, switchable +6 or +15dB boost/cut range and 40mm faders with nonconductive nylon sliders. The Advanced Feedback Suppression (AFS) feedback elimination module is provided. The AFS uses Precision Frequency Detection and state-of-the-art processing to determine the exact portions of a given frequency that is causing feedback without removing approximately half of the signal power, as is the case with the traditional method of moving the offending frequency's slider. In addition, the iEQ-31 provides dbx Type V noise reduction and PeakStopPlus limiting for taming unwanted peaks. XLR, 1/4" and Euroblock inputs and outputs and an intuitive user interface with comprehensive output and gain reduction metering round out this professional EQ that is perfect for touring applications or in installed sound venues. Features Advanced Feedback Suppression (AFSā¢) Type Vā¢ Noise Reduction PeakStopPlusĀ® Limiting 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of +6 or +15dB 18 dB per octave 40Hz low-cut filter +12dB input gain range XLR, TRS and Euroblock Inputs and Outputs Internal Toroidal Transformer Dynamic range of greater than 113dB User Power Up Features Relay Bypass for Power Failure System Protection Specification Input Connectors: 1/4" TRS, female XLR (pin 2 hot), and Euroblock Input Type: Electronically balanced/unbalanced, RF filtered Insert Impedance: Balanced 40k ohm, unbalanced 20k ohm Max Input: >+22dBu balanced or unbalanced CMRR: >40dB, typically >55dB at 1kHz Output Connectors: 1/4" TRS, male XLR (pin 2 hot), and Euroblock Output Type: Active-balanaced/unbalanced, RF filtered Output Impedance: Balanced >120 ohm, unbalanced >60 ohm Max Output: >+20dBu balanced/unbalanced into 2k ohm or greater Frequency Response: 20Hz to 20kHz, +dB Dynamic Range: >113dB, "A" weighted THD+Noise: Interchannel Crosstalk: Noise Reduction: Up to 10dB of dynamic broadband noise reduction Digital Resolution: 24 bits Sample Rate: 48kHz Latency: 2msec Operating Voltage: 120VAC 60Hz, VAC Hz Power Consumption: 17 Watts Power Connector: IEC receptacle Dimensions (WxHxD): 19 x 3.5 x 7.9" Weight: 9.25 lbs Ad ID: Delivery Service Consumer Credit