larvic woodturning lathe acres willington derby in

Larvic Woodturning Lathe-Acres 'Willington' Derby in

LARVIC LATHE-ACRES 'WILLINGTON' DERBY This lathe was bought by my partner 3 years ago with the intention of learning to do woodturning. Unfortunately, he has not had the time to achieve this, so it now requires a deserved home! The lathe is in good condition and of solid construction. It has a 3 speed pully system, but is missing the face plate required for bowl turning. However, these are readily available at a reasonable price via auction site shops. There are some chisels included (see photo), and we will also provide 20 kg of various hardwoods (oak, walnut, beech) to start you off. The lathe can be dismantled for transport.. Local delivery may be arranged by agreement. £225

Larvic Woodturning Lathe-Acres 'Willington' Derby

LARVIC LATHE-ACRES 'WILLINGTON' DERBY This lathe was bought by my partner 3 years ago with the intention of learning to do woodturning. Unfortunately, he has not had the time to achieve this, so it now requires a deserved home! The lathe is in good condition and of solid construction. It has a 3 speed pully system, but is missing the face plate required for bowl turning. However, these are readily available at a reasonable price via auction site shops. There are some chisels included (see photo). The lathe can be dismantled for transport.. Local delivery may be arranged by agreement. Read More

woodturning lathe,lathe,woodturning, turning,woodworking

Spindle turning - 890mm between centres and 140mm swing over bed, there are two tool rests (125mm and 155mm). Bowl turning - the head swivels to any angle, and has a swing of 195mm over the bed with a third tool rest (155mm). This lathe is variable speed with a reverse switch and has inbuilt indexing. Included in sale is a 150mm face plate, a 70mm face plate, a 8mm screw chuck and both centres that can be seen in photos. The price is ono.

WOODTURNING LATHE in Falkirk

Used wood turning lathe ideal for beginner,hobby wood turning approx 10" turning can be achieved comes with in and out faceplates also long and short tool rests and bowl turning rest collection only due to weight (can be easily demounted for transport will fit into any car boot) may include some chisels. Recently stripped down and cleaned and reassembled ready for sale. Recent purchase of upgraded lathe is the reason for sal

Jet Woodturning Lathe in Ilminster

Jet B Lathe complete with Axminster Evolution SK114 chuck. In excellent condition except for a few stains where the polish spilled a little. Comes with several sets of Axminster chuck jaws and various attachments. Can be seen working and/or tested. Due to the size and weight this is definitely collection only. No offers.

Myford ML8 woodturning lathe. in Saltash

Excellent condition. Located near Redruth, TR153TN

Myford ML8 woodturning Lathe in Abingdon

Myford ML8 woodturning Lathe Comes on original stand/workstation Has all the various attachments to start turning, and even some various bits of wood to work on Good working order, very solid and well built Local Pickup South Abingdon £450

RECORD POWER WOODTURNING LATHE WITH ACCESSORIES in

£ O.N.O. Record Power CL1 woodturning lathe in excellent condition. Comes with drive centre, revolving tail centre, faceplate, 10" toolrest, set of Marples chisels, full face protective polycarbonate mask, & instruction manual. Must be collected from PE4.

Axminster AWVS Woodturning Lathe in St. Austell

Trade rated, excellent condition, electronic variable speed, comes with head stock,tail stock and bowl attachment, distance between centres 400mm, max diameter over bed 178 mm, speeds and rpm, excellent star ratings on reviews, cost me £ 535 for lathe plus £ 222 for stand so bargain at £450 (please no time wasters). St Austell, Cornwall, may be able to deliver if local ??

al-ko kober woodturning lathe in Kidderminster

hi i have a al-ko kober wood lathe good working order good condition 3 speed about 5ft long and 4 ft high with 3inch face plate and chuck looking to swap for another lathe

Axminster AWVS Woodturning Lathe in St. Austell

Excellent condition, trade rated, variable speed, with head stock,tail stock and bowl attachment, distance between centres 400mm, speeds and rpm, lathe cost me £535 and stand another £222 I`m asking £450 so grab a bargain, excellent reviews for this lathe on line, check out current price on line also, way more than i`m asking, St Austell.

large woodturning lathe nu tool in Castleford

Woodturning lathe quite large overall size is around 4' 5" turning capacity between centres is around a metre

Scheppach DMV 200 Woodturning Lathe in Wirral

I am selling on behalf of my school a 3-phase Scheppach DMV 200 Woodturning Lathe. (Power label on back of machine states 3/PE 50HZ AC -400V 2.05A) PLEASE NOTE: THIS MACHINE WILL NOT WORK FROM A 13 AMP PLUG INTO A 240V MAINS SUPPLY!! This is an excellent lathe. It has had absolute minimal use and can be considered in as new condition and as a result of very little use we have decided to sell the machine. It is around 960mm between centres maximum and has capacity for around 400mm bowl turning, though the cut out in the bed right below the drive end could increase this by quite a lot on shallower work such as platters etc.... If you would like to view it, it is located in Wirral, Merseyside. Offers around £550 Thanks for looking.

Record Power DML/24 Lathe Plus 12 Woodturning Tools. in

Record Power DML/24 Lathe Plus 12 Woodturning Tools. Ready to use and fully working. I can take it off the bench and pack it up and box etc if you want to send your own courier for it With or without bench i can take it off the bench if you dont need it. tools may need a clean and maybe a sharpen There is even a bowl on the lathe already for you to finish off. Comes with some other chucks and jacobs chuck plus few other tools etc. Welcome to come and view and test it out.

woodturning lathe

Nutool woodturning lathe with chucks chisels face plates in good working order can be seen running buyer collects Read More

Woodturning Lathe...

Woodturning Lathe, a nu-tool lathe with a 42in bed which you can reduce to 21in if req.3/4hp motor all in very good working condition, 4 speeds to chose from to suit any job. £, Lewes, .

WOODTURNING LATHE

APTC M900 AXMINSTER WOODTURNING LATHE WITH INSTRUCTIONS Read more

woodturning lathe

twin bar system all chisels and rests three speed made by carpenter. Read More

Woodturning Lathe

Nu Tool woodturning lathe, working order, a few years old but plenty of life left in it yet, collect only Read more

WOODTURNING LATHE

APTC M900 AXMINSTER WOODTURNING LATHE WITH INSTRUCTIONS Read more

WOODTURNING LATHE

Record DML36SH, legstand, bowl rest, collet chuck, tools, almost unused. Call for more information. TM Ref: -01 Read more

Woodturning Lathe...

Woodturning Lathe, AxminsterCCL Lathe 2MT spindle Free Standing variable speeds, Can be seen workingComes complete with Chuck £, St. Leonards-On-Sea, .

woodturning lathe...

woodturning lathe, Wood turning lathe 26inch bed 3ft in length I believe this is a clacks 2.0 lathe electrics need to be connected in good condition £, Hailsham, .

Woodturning Lathe

Scheppach dmt450 wood turning lathe. 3 months old and as new. Upgrading to larger machine. Ad ID: Delivery Services Consumer Credit

Woodturning lathe

One year old Axminster AH-vs, vgc, comes with 80mm diameter face plate, live center and spur drive center, Collection only, Read more

Contact

• Next →