jackson dk2 left handed made in japan

Jackson DK2 left-handed made in Japan.

Versions of the DK2 are nowadays often Asian-made at lower cost and quality than the Japanese ones. Bought in , this has an alder body, with a trans-blue finish over flame maple, and a maple neck with off-white binding. A rosewood fingerboard and jumbo frets. The Jackson Licensed bridge/tremelo is a copy of a Floyd Rose, and the pickups are "Duncan Designed" versions of the originals, with the hot humbucker plus two single coils. The neck quality could only be surpassed by a USA Jackson, and if the pickups were upgraded this one has lots of potential. Home use only, in excellent condition. If necessary, delivery can be by Parcelforce for approx. £20. Ad ID: Delivery Service Consumer Credit

Jackson DK2 Dinky Electric Guitar - Made In Japan

Jackson DK2 Dinky guitar for sale. This guitar has been serviced and setup, and it plays like an absolute dream. I've never owned a Jackson before but the Japanese craftsmanship is superb. The guitar looks lovely too with the flame Maple veneer top and natural finish It has been gigged by a previous owner so there are minor imperfections here and there, plus the tremolo cover is missing. The hard case is included. Read More

Jackson Pro series DK2 Dinky MIJ (Made in Japan)

For sale is a great, made in Japan (in ), Jackson DK2 (Pro series) for 300£ with hard case and extras (Gibson cleaning kit, will last for a year. Planet waves tuner, picks, etc) Condition: Overall great condition, the finish is still in great shape holding mirror finish on the transparent top. There are a couple of scratches and a bigger dent on the finish on the back (see photos) but nothing that affects the playability and it is not noticeable whilst playing. The neck is in pristine condition, the rosewood fretboard retains it's healthy brown colour.The hardware could be considered 4/5 as for looks but the tuners and bridge promptly hold the tuning (I would suggest that the springs should be replaced by better ones if you intend to use the tremolo seriously)..this guitar has been used live without any major problem. The volume pot is a bit scratchy but the issue can be solved (It will not hamper the signal when maxed out though). The hard case has seen better days but it is definitely usable ! Specs: Alder body with flamed maple top (transparent purple finish, it looks darker in real life, rare.) Made in the Japanese factory that has been making Jacksons for export for more than 20 years Rock maple bolt-on neck Bound rosewood compound-radius fingerboard Seymour Duncan designed pickups: STK-1 single-coil (mid and neck), JB TB4 humbucker (bridge) 24 Jumbo frets Matching headstock with pinstripe Jackson-licensed Floyd Rose low-profile double locking trem Sharkfin inlays Ivoroid binding Chrome hardware Sealed die-cast tuners Floyd Rose Licensed Jackson Low Profile JT580 LP double-locking 2-Point Tremolo Serial # Collection only, feel free to come and see it, unfortunately I don't have an amplifier as I moved here from Portugal not long ago. Reason for selling it: University and work. Ad ID:

Jackson DK2 (made in Japan) - great condition in Broadstone

A couple of tiny (barely noticeable marks. This guitar has hardly been played. I'm cutting down my collection. I would prefer cash on collection, but will post for £25 extra.

JACKSON DK2 STRUNG THRU DINKY MADE JAPAN super strat custom

JACKSON DK2 STRUNG THRU DINKY MADE IN JAPAN super strat custom humbuckers shred metal made in japan factory sticker still on the back of the headstock BOUND MAPLE NECK W/ ROSEWOOD FINGERBOARD REVERSE SHARK FIN INLAYS JACKSON 6 IN ALINE MACHINE HEADS ALDER BODY STRUNG THRU BRIDGE NECK - UPGRADED TO A KCP CUSTOM PAF ZEBRA HUMBUCKER BRIDGE - UPGRADED TO A KCP CUSTOM DOOM SLAYER HUMBUCKER 1 VOLUME 1 TONE (THIS IS A DISABLED DUMMY POT) 3 WAY SWITCH fitted with schaller strap locks NECK FINISH HAS BEEN PRO DE SATINISED TO GIVE IT A MUCH SMOOTHER FEEL NOW HAS A NATURAL WAX & OIL FINISH TO IT ALA EDDIE VAN HALEN STYLE TONE POT IS A DISABLED DUMMY POT I NEVER USE THE TONE POT, SO HAS STRAIGHT THRU SIGNAL CHAIN NO BLEED OF LOSS TO THE TONE POT) NOTE UPGRADED THE PICKUPS ASWELL A KCP CUSTOM PAF ZEBRA IN NECK & A KCP CUSTOM DOOM SLAYER IN BRIDGE WHICH ARE HUGE IMPROVEMENTS OVER THE STOCK PICK UPS THAT WERE FITTED. THESE HAVE ALOT OF TONE TO THEM VERY GOOD USED CONDITION HAVE TRIED TO SHOW IN THE CLOSE UP PICS SOME SMALL LIGHT SCRATCH MARKS THAT THERE ARE IN THE TOP COAT ask to see thse pics Read More

Jackson DK2M made in Japan

This is one of my fav guitars and i swore if never sell it but ive seen something i really want so need the cash. Pickups have been upgraded to a set of Dimarzio Liquifire and Crunch Lab so it sounds amazing. Low action so this is an absolute shred machine. Comes with bulletproof Jackson fitted hardcase and a spare locking nut. Read More

Jackson DK2 PRO SERIES - Genuine Jackson hardcase

Selling my great condition Jackson Dk2 pro series. Comes with authentic Jackson hardcase worth over £100. Fitted with Seymour Duncan JB in bridge and Seymour Duncan at vintage hot stack noiseless single coils in middle and neck. Has a ebony fretboard and maple neck with only light laquer for smooth feel. Message with any questions. Not interested in trades. Get this great deal while available. Ad ID: Delivery Service Consumer Credit

JACKSON DR7 DINKY REVERSE 7 STRING MADE IN JAPAN custom

JACKSON DR 7 DINKY REVERSE 7 STRING MADE IN JAPAN custom humbuckers djent shred MAPLE NECK W/ ROSEWOOD FINGERBOARD REVERSE SHARK FIN INLAYS JACKSON 7 IN ALINE MACHINE HEADS ALDER BODY STRUNG THRU BRIDGE NECK - KCP PICK UPS ANNIHILATOR CUSTOM 7 HUMBUCKER BRIDGE - KCP PICK UPS ANNIHILATOR CUSTOM 7 HUMBUCKER 1 VOLUME 1 TONE 3 WAY SWITCH VERY VERY GOOD NEAR MINT UNUSED CONDITION NO CHIPS ON THE POINTY HEADSTOCK I HAD A MATCHED PAIR OF KCP PICK UPS ANNIHILATOR CUSTOM 7 HUMBUCKERS FITTED TO IT WHICH ARE HUGE IMPROVEMENTS OVER THE STOCK PICK UPS THAT WERE FITTED. THESE ARE POWERFUL PICK UPS THAT HAVE ALOT OF TONE TO THEM ASWELL hi e string buzzes abit when open thats just the super straight neck & the preffered action i have Read more

JACKSON MADE IN JAPAN RANDY RHODES FLYING V BODY custom

ASK TO SEE REST OF PICS JACKSON RR3 RANDY RHODES FLYING V MADE IN JAPAN BODY & SCRATCHPLATE for custom project spare parts was removed from a jackson made in japan rr3 can ofcourse be used on whatever guitar build project you want to use it for SPECS FROM JACKSON WEBSITE Body Material: Alder original back trem cover is included. the screwed in spring claw is included the attached earth wiring is included THE SCRATCHPLATE IS AN ORIGINAL JACKSON MADE IN JAPAN PART, IT STARTED LIFE AS A NICKEL MATT FINISH & I HAD IT PAINTED BLACK (not professionally, it is not perfect) from a fantastic early made in japan guitar A GREAT PROJECT FOR SOMEONE Read More

JACKSON DR7 DINKY REVERSE 7 STRING MADE IN JAPAN custom

JACKSON DR 7 DINKY REVERSE 7 STRING MADE IN JAPAN custom humbuckers djent shred MAPLE NECK W/ ROSEWOOD FINGERBOARD REVERSE SHARK FIN INLAYS JACKSON 7 IN ALINE MACHINE HEADS ALDER BODY STRUNG THRU BRIDGE NECK - KCP PICK UPS ANNIHILATOR CUSTOM 7 HUMBUCKER BRIDGE - KCP PICK UPS ANNIHILATOR CUSTOM 7 HUMBUCKER 1 VOLUME 1 TONE 3 WAY SWITCH VERY VERY GOOD NEAR MINT UNUSED CONDITION NO CHIPS ON THE POINTY HEADSTOCK I HAD A MATCHED PAIR OF KCP PICK UPS ANNIHILATOR CUSTOM 7 HUMBUCKERS FITTED TO IT WHICH ARE HUGE IMPROVEMENTS OVER THE STOCK PICK UPS THAT WERE FITTED. THESE ARE POWERFUL PICK UPS THAT HAVE ALOT OF TONE TO THEM ASWELL hi e string buzzes abit when open thats just the super straight neck & the preffered action i have Read More

JACKSON MADE IN JAPAN RANDY RHODES FLYING V BODY custom

ASK TO SEE REST OF PICS JACKSON RR3 FMT RANDY RHODES FLYING V MADE IN JAPAN BODY & SCATCHPLATE for custom project spare parts was removed from a jackson made in japan rr3 can ofcourse be used on whatever guitar build project you want to use it on SPECS FROM JACKSON WEBSITE Body Material: Alder & FMT (ALDER WITH A FLAMED MAPLE TOP) original black metal control cavity cover is included original black plastic back trem cover is included (sorry forgot to pic) bridge spring claw & screws are included (as in pics howng BACK of guitar) the attached earth wiring is included (THE 2 TREM POST LUGS ARE NOT INCLUDED, THEY MIGHT SHOW IN A COUPLE OF PICS BUT WERE REMOVED) from a fantastic made in japan guitar A GREAT PROJECT FOR SOMEONE HAVE A GOOD LOOK AT THE PICS FOR CONDITION some small marks / dinks 1 large chipped fin SEE PICS IT IS THE WHAT YOU SEE IS WHAT YOU GET, NO OTHER PARTS ARE INCLUDED. only the body is for sale Read More

Jackson - RR3 - MIJ - Made in Japan - - Randy Rhoads -Upgraded dimarzio pickups

Awesome RR3, rare made in japan, high quality guitar with upgraded dimarizio pickups. text for viewings Ad ID: Delivery Service Consumer Credit

JACKSON WARRIOR WR MADE IN JAPAN & HARD CASE custom pick up

JACKSON WARRIOR WR FLOYD ROSE MADE IN JAPAN WITH CUSTOM HUMBUCKERS LARGE HARD CASE IS INCLUDED Radical Warrior body shape makes an immediate statement on stage. MAPLE NECK W/ ROSEWOOD FINGERBOARD OFFSET INLAYS JACKSON 6 IN ALINE MACHINE HEADS ALDER BODY Jackson JT 580 Floyd Rose-licensed tremolo. TREM BAR IS INCLUDED A MATCHED PAIR OF KCP PICK UPS F'IN CRUNCH CUSTOM PAF HUMBUCKERS 1 VOLUME, 1 TONE, 3 WAY SWITCH VERY NEAR MINT UNUSED CONDITION JUST NO CHIPS ON THE POINTS A VERY GOOD CONDITION LARGE HARD CASE IS INCLUDED Read more

JACKSON RR3 RANDY RHODES FLYING V BODY MADE IN JAPAN custom

JACKSON RR3 RANDY RHODES FLYING V MADE IN JAPAN BODY & CONTROL PLATES for custom project spare parts was removed from a jackson made in japan rr3 that was built in the late 's can ofcourse be used on whatever guitar build project you want to use it on SPECS FROM JACKSON WEBSITE Body Material: Alder or Popular (NOT SURE THEY WERE USING BOTH BACK THEN SO COULD BE EITHER OF) original black control cavity cover is included original black back trem cover is included both are shown in pics the attached earth wirings are included (THE 2 TREM POST LUGS ARE NOT INCLUDED, THEY MIGHT SHOW IN A COUPLE OF PICS BUT WERE REMOVED) from a fantastic made in japan guitar A GREAT PROJECT FOR SOMEONE HAVE A GOOD LOOK AT THE PICS FOR CONDITION I HAVE HI LIGHTED A PICS SHOWING SOME OF THE SMALL DINGS IN THE LAST PIC some small dings / dinks THE FINS DO HAVE SOME LIGHT PAINT CHIPPING WHICH IS VERY COMMON ON V GUITARS THAT IS WHERE YOU CAN SEE THE UNDERCOAT PAINT DIFFERENT COLOUR BOTH THEY DO NOT HAVE BIG CHIPS OR CHUNKS MISSING WHICH YOU SEE ALOT SEE PICS IT IS THE WHAT YOU SEE IS WHAT YOU GET, NO OTHER PARTS ARE INCLUDED. only the body is for sale Read More

JACKSON WARRIOR WR MADE IN JAPAN & HARD CASE custom pick up

JACKSON WARRIOR WR FLOYD ROSE MADE IN JAPAN WITH CUSTOM HUMBUCKERS LARGE HARD CASE IS INCLUDED Radical Warrior body shape makes an immediate statement on stage. MAPLE NECK W/ ROSEWOOD FINGERBOARD OFFSET INLAYS JACKSON 6 IN ALINE MACHINE HEADS ALDER BODY Jackson JT 580 Floyd Rose-licensed tremolo. TREM BAR IS INCLUDED A MATCHED PAIR OF KCP PICK UPS F'IN CRUNCH CUSTOM PAF HUMBUCKERS 1 VOLUME, 1 TONE, 3 WAY SWITCH VERY NEAR MINT UNUSED CONDITION JUST NO CHIPS ON THE POINTS A VERY GOOD CONDITION LARGE HARD CASE IS INCLUDED Read More

JACKSON MADE IN JAPAN KELLY KE EXPLORER BODY fr custom parts

ASK TO SEE REST OF PICS JACKSON MADE IN JAPAN KELLY KE EXPLORER BODY for custom project spare parts was removed from a jackson made in japan ke3 can ofcourse be used on whatever guitar build project you want to use it on SPECS FROM JACKSON WEBSITE Body Material: Alder original control cavity cover is included original lack plastic back trem cover is included bridge spring claw & screws are included (sorry not in pics showing BACK of guitar) the single volume pot is wired up to the 3 way switch & jack socket all ready to rock the attached earth wiring is included (THE 2 TREM POST LUGS ARE NOT INCLUDED, THEY MIGHT SHOW IN A COUPLE OF PICS BUT WERE REMOVED) from a fantastic made in japan guitar A GREAT PROJECT FOR SOMEONE Read More

JACKSON MADE IN JAPAN DINKY FMT BODY ROLAND GK MIDI custom

JACKSON MADE IN JAPAN DK DINKY FMT BODY WITH ROLAND GK MIDI PICK UP for custom shred build project SPECS FROM JACKSON WEBSITE Body Material: Alder w/ flamed maple top veneer stained & oil finish original back trem cover & control cavity covers are included. the screwed in spring claw with earthing wire are included fitted trem post lugs are included guitar is routed for 2 x single coil & 1 x humbucker set up roland gk midi pick up is installed & wired up ready to go guitar body does have some marks in it, it is an oil finish these are pictured small gap where the cover for the midi socket is from a fantastic early made in japan guitar A GREAT PROJECT FOR SOMEONE Read More

JACKSON GUITAR NECK MADE IN JAPAN BOUND 22 FRET for custom 4

JACKSON GUITAR NECK MADE IN JAPAN BOUND 22 FRET for custom spare parts build project shred machine tone monster RARE was removed from a jackson made in japan guitar can ofcourse be used on whatever guitar build project you want to use it on Neck Material: Maple & Rosewood BOUND 22 Frets original black trussrod cavity cover is included from a fantastic made in japan guitar A GREAT PROJECT FOR SOMEONE HAVE A GOOD LOOK AT THE PICS FOR CONDITION some small marks there is no damage to the pointy headstock SEE PICS IT IS THE WHAT YOU SEE IS WHAT YOU GET, NO OTHER PARTS ARE INCLUDED. only the neck is for sale Read more

Fender Stratocaster made in USA Left Handed

Hi Here's my 'Made In USA' left handed Stratocaster guitar. It was made in at the Fender plant in Corona California. The paintwork is in good condition for it's age, the plastic parts have started to yellow. It's all original spec' and will come with a fitted case. The price includes postage to UK only. £20 deduction if picked up in person Any questions please leave me a message and I will get in touch as soon as I'm able. Thanks for looking. Read More

Left handed Jackson guitar control plate and bridge trem

From a left handed Jackson Dinky guitar. Both come with screws. May fit other guitars (particularly the bridge / tremolo back plate).

JACKSON GUITAR NECK MADE JAPAN 22 FRET custom spare parts 2

JACKSON GUITAR NECK MADE IN JAPAN 22 FRET for custom spare parts build project shred machine tone monster RARE was removed from a jackson made in japan guitar can ofcourse be used on whatever guitar build project you want to use it on Neck Material: Maple & Rosewood 22 Frets original black trussrod cavity cover is included from a fantastic made in japan guitar A GREAT PROJECT FOR SOMEONE HAVE A GOOD LOOK AT THE PICS FOR CONDITION some small marks there is no damage to the pointy headstock SEE PICS IT IS THE WHAT YOU SEE IS WHAT YOU GET, NO OTHER PARTS ARE INCLUDED. only the neck is for sale Read more

JACKSON GUITAR NECK MADE JAPAN BOUND 24 FRET for custom 3

JACKSON GUITAR NECK MADE IN JAPAN BOUND 24 FRET for custom spare parts build project shred machine tone monster RARE was removed from a jackson made in japan guitar can ofcourse be used on whatever guitar build project you want to use it on Neck Material: Maple & Rosewood BOUND 24 Frets original black trussrod cavity cover is included from a fantastic made in japan guitar A GREAT PROJECT FOR SOMEONE HAVE A GOOD LOOK AT THE PICS FOR CONDITION some small marks there is no damage to the pointy headstock SEE PICS IT IS THE WHAT YOU SEE IS WHAT YOU GET, NO OTHER PARTS ARE INCLUDED. only the neck is for sale Read more

  Jackson DK2 Dinky Hot Rod Flames Electric

Near Mint and Beautiful!! Ships Internationally!!

Jackson DK2 with Flame Neck and EMG Pickup!

For sale I have here my Jackson Custom DK2 Dinky, with a rare flamed neck and EMG H4 pickup in the bridge. With awesome Seymour Duncan Designed pickups (SC101s in the neck/middle position), a licensed Jackson Floyd Rose locking tremelo system, volume and tone controls, 3 way pickup select switch and a rate flamed inlays neck this guitar is perfect for rock or metal! This is a UNIQUE guitar. There are no others like this in the world! Collection is from Letchworth Garden City or I can post at buyers expense. Thanks for looking! Read More

Left handed Taylor made

Left handed Taylor made driver 9.5 degree X shaft Key to adjust loft included New lampkin red grip Rocket ball stage 2 Head over included Ad ID: Delivery Service Consumer Credit

Contact

• Next →