Dynatek Twin Fire Coils 2 Outputs 2 Coils 1.5 ohms
SKU: , These high tech,top quality coils are designed for maximum performance. They produce spark voltages in excess of volts and spark energies second to none. DYNA Coils are made to replace stock coils. Choose from three configurations and five variations of resistance for different applications. DYNA Coils work with point ignitions,aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil,check the coil primary resistance requirements as specified by the manufacturer of the ignition being used.FEATURES,BENEFITS: No exposed lamination to rust and degrade performance. High voltage and primary terminals machined from brass. Ultrasonically welded and sealed against moisture. Compact size fits easily under stock covers. Peak gap current in excess of 50mA. High impact thermoplastic housing. Over volts per output. Accepts 7 to 8.8mm wires. 1 year warranty. DYNA Ignition System Coil Requirements:DYNA Pro Ignition Must use DC91 or DC92. The DYNA ignition system is designed for racing only and is matched to the characteristics of the DC91 coil for optimum energy production., Recommended,DC71,DC81,DC101,DC31,DC61. Use coil with 5.0 ohms primary resistance for street use,3.0 ohms primary resistance for racing applications. Single Plug Head: Single Fire,Use two single output coils,street or strip. Dual Fire,Use one dual output coil,street or strip. Dual Plug Head: Single Fire,Use two dual output coils,street only. Dual Fire,Use two dual output coils,street or strip. Dual Plug Head,single fire racing applications: Use two DC ohm coils,connected in series for each cylinder. Since these coils are dual tower,one tower of each coil must be shorted to chassis ground. DYNA S nonHarley: Recommended,DC11. Use coil with 3.0 ohms primary resistance. Buy Now