galvanized metal post supports 4x

  Galvanized Metal Post Supports 4"x

        Galvanized 4 x 4 inch  Metal Post Bolt Grip Supports for 4" x mm x 100mm) Timber Fence Post                                                                  Bolt to Ground                      Position each bolt-down post bracket along the line at regular intervals to correspond with the width of your fence panels. It can be easiest to literally lay out the panels and posts to provide exact positioning. Simply mark (with a pencil or chalk) through the fixing holes. Put the bracket to one side and drill to the correct depth using a power drill. Here I’m using expanding bolts to fix the posts in place. On the side of the bolts (or packaging) is normally a figure that relates to the drill bit size you should use. Be as accurate as possible when drilling the holes.  Re-position the bracket, before inserting and securing the bolts. Each bolt may first need tapping in place with a hammer before using a spanner to tighten in place. You can also do this by using the correct size of spanner bit with your cordless drill. After inserting the post, tighten the socket bolts to secure the post in position. There may also be pre-drilled holes on the bracket where you can insert screws as extra fixings. As in the guide – ‘Erecting a fence on soft ground’, you should fit gravel boards along the bottom of the fence before fitting the panels in place using fence clips. If you need to dill further holes in the metal socket section of the bracket (in order to fix gravel boards) simply use HSS drill bits, which are designed for going through metal. Finally nail caps to the top of each post to protect the end grain from the weather

Metal Fence Post Supports

4 metal fence post supports 75mm x 75mm x 600mm, including 1 bag of postcrete. Read more

  Big Metal Post Supports 6"x mmx150mm)

                    EXTRA LARGE 6" X 6"   Brown Metal Post Bolt Grip Support for 6" x mm x 150mm) Timber Fence Post                                                                  Bolt to Ground                                                    All extra brackets ordered, only                                                  £3.50 delivery charge for each bracket                                Take a look at my other items for special offers                                                    on packs of 10  Position each bolt-down post bracket along the line at regular intervals to correspond with the width of your fence panels. It can be easiest to literally lay out the panels and posts to provide exact positioning. Simply mark (with a pencil or chalk) through the fixing holes. Put the bracket to one side and drill to the correct depth using a power drill. Here I’m using expanding bolts to fix the posts in place. On the side of the bolts (or packaging) is normally a figure that relates to the drill bit size you should use. Be as accurate as possible when drilling the holes.  Re-position the bracket, before inserting and securing the bolts. Each bolt may first need tapping in place with a hammer before using a spanner to tighten in place. You can also do this by using the correct size of spanner bit with your cordless drill. After inserting the post, tighten the socket bolts to secure the post in position. There may also be pre-drilled holes on the bracket where you can insert screws as extra fixings. As in the guide – ‘Erecting a fence on soft ground’, you should fit gravel boards along the bottom of the fence before fitting the panels in place using fence clips. If you need to dill further holes in the metal socket section of the bracket (in order to fix gravel boards) simply use HSS drill bits, which are designed for going through metal. Finally nail caps to the top of each post to protect the end grain from the weather

concrete in post supports...

concrete in post supports, X 4. Surplus to requirements. For 75cm (3") posts. Original cost £ 7.25 each. Selling as job lot. Collection only £, Bristol, .

  Pair of galvanized gate post hinges

Pair of galvanized gate post hinges Total lenbth about13.5 inches, post width about 5 to 10 inches good condition hinge post diameter about 3/4 inch, thread diameter about 3/4 inch

Steel Fence Post Holder Spike Supports (Metaposts)

Steel Fence Post Holder Spike Supports. 4" or 100mm square. Ideal for fencing or for a pergola. Just been removed from my garden so used but many years use left. 4 off in total. Collection only from Manea Ad ID: Delivery Service Consumer Credit

4x Mini DisplayPort 1GB Matrox M-ELAF, PCIe (x16) Passive Low Profile Supports 4 HD MONITORS

HI I AM SELLING MY MATROX M LP PCIe x16 QUAD MINI DP GRAPHICS CARD 1GB THE CARD FULLY WORKS & COMES WITH 1 MINI DP TO VGA CABLE WORKS WITH WINDOWS bit & 64bit High-resolution four DisplayPort monitor support Support resolutions up to x per output Native PCI Express x16 performance Maximum bandwidth to ensure best performance 1 GB of memory For enhanced performance in demanding multi-monitor applications Low-profile form factor To fit in a wide variety of systems; You can buy a bracket for full-height ATX form factor Passive cooling and low power consumption Fanless design eliminates noise and increases product reliability Stretched and independent desktop modes Expand your desktop across multiple monitors or set each monitor independent of each other Edge Overlap Easily and intuitively adjust the number of overlapping pixels to create a seamless, unified image on up to eight edge blending projectors. M-Series multi-card support1 Add an additional M-Series card into the same system to drive up to 12 displays from two cards Joined graphics card mode2 Insert two M-Series cards into the same system to drive even more monitors across a stretched desktop Matrox Clone View a copy of one display on the other displays Wide enterprise flexibility Unified driver package compatible with other Matrox products Matrox PowerDesk software Easily configure and manage program windows on multiple monitors Multiple operating system support Display drivers for Microsoft® Windows® -bit, 64-bit; non-WHQL), Windows Server® -bit, 64-bit), Windows 7 (32-bit, 64-bit), Windows Embedded Standard 7 (32-bit), Windows Vista® (32-bit, 64-bit), Windows Server R1 (32-bit, 64-bit), Windows Server R2, Windows XP (32-bit, 64-bit), Windows Server and Linux®3 CALL OR TEXT ANYTIME ONLY £40 DELIVERY CAN BE MADE FOR £5 - TRACKING WILL BE SUPPPLIED COLLECTION FROM CR7-8BT 250 BUS ROUTE Ad ID: Delivery Service Consumer Credit

Heavy duty, galvanized washing line post and socket

Heavy duty, galvanized steel washing line post, never been used. Please contact by text as not always able to answer phone. Cash on collection only please. Ad ID: Delivery Service Consumer Credit

Fence post extenders, metpost supports and repair spur wedge.

Used 75mm x 75mm post extenders, (10 items, brown) normally new about £6- £7 each. Used metpost repair spur wedge (2 items) normally new about £6 each. Used metpost 50mm x 50mm (5 items) normally new about £6 each. £ the lot (ovno) Ad ID: Delivery Service Consumer Credit

Galvanized metal gate

Galvanised metal driveway gate with gateway in good condition. 2x130cm wide and 100cm high gate and 95 cm gateway and 4 posts. Collection only. Please call to this number: Greg ... (click to reveal full phone number).

Galvanized Metal Gates...

Galvanized Metal Gates, Two wrought iron galvanized gates for possible driveway or entrance. Each one measures 4ft-9" wide X 3ft-5" height. £, Brighton, .

Dustbins galvanized metal x3

three galvanized metal dustbins, little rust on the bottom, lids have paint and the odd dent £5.00 each or £ for the three Ad ID:

  galvanized metal field gate

Metal gate previously used as driveway gate. 9' 11" x 3' 9" (3m 1.5cm x 1m15cm) Buyer to collect

metal galvanized steel gates

these mesh gates are ideal for cat/ dog pens.in very good condition with bolts measurements 6ft3in by 3 ft, 10 available. Read More

Plant/flower supports. Metal.

Three full circle, two half circle. Un used. Crawley. £10

Metal galvanized trough/ garden planter

Metal trough, a very good deal at this price so no offers please

Vintage galvanized metal containers, three

Two large round drinks coolers in galvanized metal, ideal for barbecues and summer entertaining! Also one tall one for flowers. Vintage, good condition, many uses. Read More

Vintage galvanized metal containers, three

Two large round drinks coolers in galvanized metal, ideal for barbecues and summer entertaining! Also one tall one for flowers. Vintage, good condition, many uses. Read More

  Galvanized metal "Bristol" Gate with

A Centrewire "Bristol Gate" width 236 cm, height 115 cm. The internal pedestrian gate width 67 cm.  A new post is included.

6 Galvanized metal planters with handles

These were used as centrepiece ice buckets for beers - easily held 12 bottles. They have been sprayed with a clear sealant to ensure they did not leak. Could be used for flowers. Stackable. Read more

Small Handmade Curved Metal Plant Supports

<img src="http://ti2.auctiva.com/web/aswCredit.gif" border="0"><br><a href="http://www.auctiva.com/?how=scLnk1" target="_blank"><img src="http://ti2.auctiva.com/images/sc1line1.gif" border="0"></a> Mini Curved Plant Supports - Rusted Style Manufactured by Homestead and Garden in our Lincolnshire Workshop Made from 6mm Mild steel. All approximately cm) across.Finish is simple & will give a rust effect in time. Helps blend in to the natural scenery. Mini curved plant supports for the delicate and small plants in your borders and pots. Same as our very popular large curved plant supports.Please see other adverts. 4 Heights now available 3 pack sizes. "Click the Buy It Now! button to have this made by Homestead and Garden, especially for you" Please see our other items for sale including: Log Baskets Plant supports of various styles and sizes Log Burners Boot scrapers & holders Wine glass and bottle holders to make your party go with a swing. S upport UK small business. THANK YOU FOR LOOKING. 0) { var flashPlugin = navigator.plugins['Shockwave Flash']; if (typeof flashPlugin == 'object') { /* need flash version 6 or higher (this code should work with future flash plugins.) */ if (flashPlugin.description.indexOf(' 5.') != -1) flashVersion = 5; else if (flashPlugin.description.indexOf(' 4.') != -1) flashVersion = 4; else if (flashPlugin.description.indexOf(' 3.') != -1) flashVersion = 3; else if (flashPlugin.description.indexOf(' 2.') != -1) flashVersion = 2; else if (flashPlugin.description.indexOf(' 1.') != -1) flashVersion = 1; else if (flashPlugin.description.indexOf(' 6.') != -1) flashVersion = 6; else if (flashPlugin.description.indexOf(' 7.') != -1) flashVersion = 7; else flashVersion = 8; } } else if (agent.indexOf('msie') != -1 && parseInt(navigator.appVersion) >= 4 && agent.indexOf('win')!=-1 && agent.indexOf('16bit')==-1) { if (window.sqHasFlash || typeof(window.andale_fv) != 'undefined') { if (window.sqHasFlash || andale_fv >= 6) { flashVersion = 6; } } else { document.writeln(' '); document.writeln('on error resume next'); document.writeln('dim obFlash '); document.writeln('set obFlash = CreateObject("ShockwaveFlash.ShockwaveFlash.7")'); document.writeln('if IsObject(obFlash) then '); document.writeln('flashVersion = 7 '); document.writeln('else set obFlash = CreateObject("ShockwaveFlash.ShockwaveFlash.6") end if '); document.writeln('if flashVersion '); } } } if (flashVersion >= 6) { document.writeln(' ');document.writeln(' ');document.writeln(' ');document.writeln(' ');document.writeln(' ');document.writeln(' '); document.writeln(' ');document.writeln(' ');document.writeln(' '); document.writeln(' '); document.writeln('

120mm FENCE WIRE STRAINER tensioner galvanized metal

dq-pp Fence wire strainers 120mm Click for more variations Fence strainers are used ease adjusting fences made of mesh and tensioning ropes, which in effect allows to stabilise the fencing. Our strainers are made of galvanised steel to increase their durability. Gallery Close Next Close Next Prev Close Prev Tech data L (size) [mm] A [mm] B [mm] C [mm] D (hole) [mm] E (hole) [mm] breaking load [kg]

METAL DRIVE GATES 97" WIDE AND GALVANIZED

DOUBLE GATES 97.5 X 39.5. THE GATES ARE GALVANIZED AND JUST NEED TO BE RE PAINTED. Will go into a wider opening in required 100" reduced to clear Read More

METAL DRIVE GATES 97" WIDE AND GALVANIZED

DOUBLE GATES 97.5 X 39.5. THE GATES ARE GALVANIZED AND JUST NEED TO BE RE PAINTED. Read More

Large Metal Spiral Plant Supports. Rusted Style.

<img src="http://ti2.auctiva.com/web/aswCredit.gif" border="0"><br><a href="http://www.auctiva.com/?how=scLnk2" target="_blank"><img src="http://ti2.auctiva.com/images/sc1line2.gif" border="0"></a> Rusted Style Plant Supports Manufactured by Homestead and Garden in our South Lincolnshire Workshop. Attractive plant Supports, that are pleasing to the eye whilst your plant is growing. It will provide discrete support, displaying the natural beauty of your plants as they mature. cm) diameter. 6mm mild steel. 4 Heights 4 Pack sizesSimple finish which will rust to give natural look. Ideal for tall and leggy plants and shrubs. Supports are made upon order.Please note we are happy to ship Worldwide. Please email for International postage costs before purchase.

Contact

• Next →