Cutting board
Cutting board is produced by longitudinal sawing logs, observing the parameters of rectangular cross-section. Common parameters: width of the board (typically in excess of 200 mm) is greater than twice the thickness (less than 100 mm). There are several specific GOST standards board size of this species. The raw material for lumber are mostly softwood and some hardwoods. Timber is widely in demand for construction (floor, roof), external or internal finishing works, as raw material for the production of furniture, as well as for different applications in the sector. Cutting board is dried, which can be produced using different technologies. Our company produces logs in a special drying chamber. Then, on the modern equipment is processed kiln dried timber, resulting in a board of a given size, received in domestic and European standards. Drying the wood is carried out smoothly and without disturbances use technological standards. For the construction of high-quality wooden houses dried lumber company offers various types. At an affordable price you can buy dry boards of a given size, moisture content does not exceed 5%. Production of high-quality premium lumber produced with modern equipment, in compliance with all standards adopted in woodworking. Obtained by mechanical scabbling timber with 4 sides to give it a shape of a rectangle. From such a timber made joists, floor joists, support for ladders and other support structures. The material is usually a pine.