drummond 3 12 metalworking lathe in brandon

Drummond 3-1/2" Metalworking Lathe in Brandon

This backgeared lathe (Bed Number:)is old but with little wear! - All mechanisms work smoothly and it comes complete with the following Gears: 55T; 50T; 45T; 40T; 38T; 35T and two 20T. It's mounted on the original cast iron Base, and I have found a Countershaft which could be utilised to give a range of speeds. There is a -Jaw Chuck with Key, and a 5-3/4" Faceplate which I am having some trouble screwing on!(but I am hoping to get another to replace it shortly). The Spindle Nose is 'as new' however. There is no Motor included, but I do have available a powerful 110-Volt motor with matched Transformer as an extra should you need one. The lathe will fit into the average car's boot, and can be lifted by two persons who've had their Weetabix for breakfast! Local delivery possible up to 50 miles for petrol cost. More email photos on request.

Zyto 3-3/8" Metalworking Lathe in Brandon

Built by Tyzack &Co in London up to the late 's and comes with a fairly rare cast-iron stand with countershaft. It's a back-geared, machine with tumble-reverse and almost a full set of screwcutting gears, and both bed and bearings are in very good unworn condition. For full details please call me for more photos and information.. Limited delivery from IP27 0RH may be possible, but would fit into most car boots with the stand dismantled. Can be used as a bench lathe if one bolts the countershaft onto to the bench.

Zyto 3-3/8" Metalworking Lathe

Built in London up to the late 's and comes with a fairly rare cast-iron stand with countershaft. It's a back-geared, machine with tumble-reverse and almost a full set of screwcutting gears, and both bed and bearings are in very good unworn condition. For full details please call me for more photos and information.. Limited delivery from IP27 0RH may be possible, but would fit into most car boots with the stand dismantled. Can be used as a bench lathe if one bolts the countershaft onto to the bench. Read More

Myford ML4 metalworking lathe in Colchester

Selling for my mum. My late fathers Myford ML4 metalworking lathe. The photos show the details, what's there is what's included, it needs reassembling, cleaning whatever so only £100 to get it gone before she moves. Collection from near Colchester, Essex. NOTE: If you can collect over the weekend of the 21st/22nd of January while i am in all day both days you can have it for £80:-)

Lathe - Drummond screwcutting Lathe

This is a reasonably small sized backgeared v-belt driven bench lathe with cast iron base, a set of screwcutting gears, a 6" faceplate, tailstock chuck, 5" 3-jaw chuck and in good renovated condition. Adjustable bearings are good as is bed surface. Included is a 3-pulley countershaft for wall (or?) mounting, and a suitable electric motor is available as an 'extra' should one be needed. can be carried easily by two people, or one person if partly dismantled. Delivery within 30 miles of Thetford/Cambridge is possible for petrol cost.

Drummond single phase lathe in Radstock

A nice compact Drummond single phase lathe with boxes of accessories.

Drummond metal workers lathe in Waterlooville

Good condition renovated engineers lathe.Comes with many boxes and tins of parts relating to the lathe, chucks etc. Drummond 21. Buyer collects

Drummond B Centre Lathe in Teignmouth

3 & 4 jaw chucks Change gears and tools etc.

Drummond Lathe

Drummond Lathe, used condition can be seen working, mounted on bench at moment some tools included, can help with loading or deliver local if this helps, selling for a friend with no internet Read More

Keen to get a small metalworking Lathe for renovation

If you might have a small Lathe, perhaps needing work, do please let me know. (I'm not a Dealer!) Can collect within about 50 miles of Thetford. Many thanks, Richard Read More

Keen to get a small metalworking Lathe for renovation

If you might have a small Lathe, perhaps needing work, do please let me know. (not a Dealer!) Can collect within about 50 miles of Thetford. Many thanks, Richard Read More

Early Drummond Lathe wanted

I need many parts for repairing my Drummond - would buy a whole lathe if you have one, Thanks, Richard Read More

Drummond Round Bed lathe

Made around 's. In good condition. With 240 volt motor. Tool post with tool. Spare gears. No drive belt. Read More

Drummond Round Bed lathe

Made around 's. In good condition. With 240 volt motor. Tool post with tool. Spare gears. No drive belt.WILL FIT IN MEDIUM SIZED HATCHBACK CAR. can be used to mill. Read More

Drummond Round Bed lathe

Made around 's. In good condition. With 240 volt motor. Tool post with tool. Bed rotates for versatility can be used to mill. Comes with history and instruction leaflet. WILL FIT IN MEDIUM SIZED HATCHBACK CAR. Read more

Metal lathe Drummond and brothers

Metal lathe good condition pick up Blackpool only Read more

Single Phase Lathe Motor in Brandon

Bought but never used, probably 1/4hp, but maybe 1/2hp! A heavy quality item. Not needed now, so selling cheaply. Collection only IP27 0RH due to weigh, although once paid, could deliver within 30 miles for petrol..

Drummond Round bed treadle lathe and treadle

Drummond Round bed treadle lathe and treadle Comes with 3 jaw chuck with St. Georges stamped on it the serial number is which makes it the tool holder as a position for boring the lathe has been stripped cleaned and oiled it is in excellent condition Read more

Lathe: Myford / Drummond with Myford stand...

Lathe: Myford / Drummond with Myford stand, Pre ML7 Myford lathe with selection of change wheels, 3 jaw and 4 jaw chucks, face plate and other attachments.On Myford stand, itself alone worth £350.A good solid machine, ideal for serious engineers and previously owned by a respected craftsman.Currently in storage and needs a new home soon as the space is required. Showing a little surface rust that doesn't affect the integrity and quality of the machine.Please give me a call or an email to arrange a viewing.Advertised on other sites. Serious offers considered. £, Bournemouth,.

nova g3 lathe chuck 3/4x16tpi for wood lathe brand new boxed

for sale a brand new boxed nova g3 chuck for wood lathe 3/4x16tpi all complete with chuck body a set of standard nova jaws. faceplate and worm chuck both fit in the chuck it is all there with manual and chuck key you can see all the pictures clearly on you can collect or have it posted at cost via hermes

Metalworking Lathe Chester MF42B, Chester MF42B

Metalworking Lathe Chester MF42B, Chester MF42B metalworking lathe. Virtually unused from new, believed to be around 10 years old. It has a collection of accessories to go with it and the robust wooden table is included in the deal. £, Guildford,.

12 inch...wheels in Brandon

Apollo Popstar child's bike.. all good.. located Lakenheath village Postcode IP27 9SD

12 inch..perfect..! in Brandon

Apollo child's bike.. all good.. located Lakenheath village Postcode IP27 9SD

Atlas metal lathe WANTED, 10" or 12" Atlas lathe wanted...

Atlas metal lathe WANTED, 10" or 12" Atlas lathe wanted that is in good useable condition. Cash waiting £, Hungerford, .

Myford Lathe ML10 (Metal lathe) in Guildford

Myford ML10, used condition, forward and backwards motor however the motor is underpowered for the machine. Has a new lead screw clutch fitted. Comes with some change wheels (see photo) Face plate. 3 jaw chuck. Lathe Manual Serial No.

Contact

• Next →