Opus BT-C100 Digital LCD Battery Charger
High Compatibility Li-ion: 3.7V and 3.85V batteries (with size from to ) NiMH / NiCd: AA, AAA, C, D LiFeO4 2.1A USB Output ● Only for Li-ion batteries ● Output mode is automatically selected according to the device attached ● Output parameters are measured and displayed on LCD Working Mode 4 working modes for Li-ion: Charge, discharge, test and impedance test 5 working modes for NiMH: Charge, discharge, test, refresh and impedance test ● Charging current can be selected from 200mA to mA (NiMH and Li-ion) ● Discharging current can be selected from 100mA to mA ● For Li-ion batteries, if charging current is over mA, its CV charging terminate current is 100mA. If charging current is less than mA, its CV terminate current is 50mA ● 0dv and –dv is automatically selected according to NiMH battery status to ensure battery is fully charged Over heat protection When temperature is over 60 degree centigrade, working current will be reduced until the condition is improved. If temperature is up to 75 degree centigrade, charger will shut down working process until temperature is lower than the safe limit Parameter: Input: AC V Output: 12V / 1A USB output: 5.0V 2.1A Operation: BAT Button ● Short press: LCD displays V, A, mAh, H (time), and MR (impedance) ● Long press for more than 2s to select working mode: Charge - discharge - test - refresh (only for NiMH) - impedance test. Press BAT to select working mode, and press USB to select working current ● Long press for more than 6s to activate Li-ion battery mode. Power up default 3.7V Li-ion batteries. Press BAT to select battery type, and press USB to exit and start to work USB Button ● Short press: Switch from showing A (current) and Ah (ampere hour) for USB output ● Long press for more than 2s to activate USB output function Boxed and brand new £15 Ad ID: Delivery Service Consumer Credit