details about sprenger kk ultra bit

Details about   Sprenger kk ultra bit

Kk ultra 5" loose ring snaffle, I have measured it the best I can and I think it's 15mm in diameter.

Details about   Sprenger KK Ultra bit 18mm

used only twice, comes with box,  mm collection preferred,

Details about   Sprenger KK Ultra bit 18mm

used only twice, comes with box, 18mm collection preferred,

Details about   Sprenger KK Ultra Full Cheek bit

DUE TO NON-PAYING FOREIGN BUYER I am re-listing for sale a full cheek Sprenger KK Ultra bit 5 " in very good condition - hardly been used at all.  See manufacturer's description below: KK ULTRA – Compared to conventional bits, the double jointed KK ULTRAs have a middle link – also known as the bean – that is shortened and angled forward by 45°.   Only with this angle the middle link lies gently on the tongue resulting in even and constant contact to allow clear instructions through the reins.   The innovative KK ULTRA bits take advantage of the exceptional sensitivity of the horse‘s tongue which multiplies the perceptions from signals given by the bit. When the reins are pulled the middle part of the KK ULTRA fully rests on the tongue without squeezing and the connection rings roll on the tongue. The tongue‘s sense of touch is utilised and clear instructions can be given.   The KK ULTRA bits provide an incomparable precisely contact between rider and horse. A huge improvement can normally be seen immediately when switching to a KK ULTRA bit.   UK BIDDERS ONLY PLEASE - I WILL SEND REGISTERED POST FOR THE NOMINAL POSTAGE STATED

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 135 mm thickness 16 mm, with stainless steel rings 70 mm its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 1 23 mm thickness 21 mm, with Stainless steel rings 70 mm, its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 154 mm thickness 21 mm, with Aurigan rings 70 mm its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 123 mm thickness 21 mm, with Aurigan rings 70 mm its only 1 x test, it have simple used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 145 mm thickness 14 mm, with Aurigan rings 70 mm, they are not really round its not often used, it have simple use tracks and discolorations, for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   SPRENGER AURIGAN KK ULTRA SNAFFLE BIt 5"

I am selling a Herm Sprenger Aurigan KK ultra bit. It is  5" long, with Aurigan mouthpiece and stainless steel rings.  It is brand new and never been used. UK bidders only Please see my other items.

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 149 mm thickness 16 mm, with stainless steel rings 70 mm its only test, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 137 mm thickness 14 mm, with stainless steel rings 70 mm its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 1 14 mm thickness 18 mm, with stainless steel rings 55 mm, its only 1 x test, it have only simple used tracks and discolorations, for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   Sprenger KK Ultra snaffle bit, 13cm / 5

Sprenger KK Ultra bit 13cm (5.25 ins) Aurigan mouthpiece with aurigan rings Small neat rings so can be used as bradoon, snaffle on a small head and also looks good on an in-hand bridle Diameter of mouthpiece 14mm 55mm aurigan rings Very good used condition - some teeth marks on mouthpiece but no rough edges.

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 137 mm thickness 18 mm, with Aurigan rings 70 mm, they are not really round its used, it have strong use tracks and discolorations, for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK ultra Argentan Bradoon bit

Top high quality from HS Sprenger Germany kk ultra conrad Argentan Training Bradoon Bit, The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. Argentan (65% copper, nickel free) size mm), the size between the rings is 126 mm thickness 14 mm, with Argentan rings 55 mm its used, it have used tracks and discolorations, its in a good condition ts i n a good conditionits a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 117 mm thickness 18 mm, with stainless steel rings 55 mm its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 1 24 mm thickness 21 mm, with Aurigan rings 70 mm its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 172 mm thickness 16 mm, with stainless steel rings 70 mm its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 153 mm thickness 21 mm, with stainless steel rings 70 mm its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 1 26 mm thickness 18 mm, with Stainless steel rings 70 mm, its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 136 mm thickness 21 mm, with Aurigan rings 70 mm its used, it have used tracks and discolorations, for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 164 mm thickness 18 mm, with stainless steel rings 70 mm its used, it have used tracks and discolorations, for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 136 mm thickness 16 mm, with stainless steel rings 70 mm its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Details about   HS Sprenger KK conrad ultra Aurigan bit

Top high quality from HS Sprenger Germany kk ultra conrad Aurigan (85% copper, 4% Silicon, rest zinc) The corner of the middle piece was turned around 45 °, with it the olive with the suit of the rein full on the tongue lies without squeezing. The sense of touch of the tongue is demanded by the new position of the lateral set of teeth parts increasingly by which the rein support of the rider becomes even more exact. size mm), the size between the rings is 146 mm thickness 14 mm, with stainless steel rings 70 mm its used, it have used tracks and discolorations, its in a good condition for more bits ask me: Insured dispatch to UK and europe is  £ 4,50

Contact

• Next →