custom dynamics dynamic ringz led turn signal inserts

Custom Dynamics Dynamic Ringz LED Turn Signal Inserts

SKU: , Feature an outer ring of 24 white LEDs for a bright coolwhite driving lightInner ring has 24 amber LEDS for an exceptionally bright amber turn signalWhen a turn signal is activated,the white LEDs turn completely off for the entire turn signal cycle,providing greater visibility to the amber turn signalMust be used with a clear or smoked lens sold separatelyAvailable in bullet and flat styles Not DOT ApprovedSold in pairs Buy Now

Custom Dynamics LED Turn Signal Inserts Pair- Harley

SKU: , Sold in pairsUpgrade conventional bulbstyle turn signals to LEDstyleAvailable in white dualfunction designPlugandplay designWide viewing angleBCMcompliantNOTE: Not DOT certified.NOTE: A load equalizer may be needed.

Custom Dynamics Clusters Front Turn Signal Inserts Amber

SKU: diameter LED cluster used for front turn signal applications using bulbsFeature 48 superbright LEDsInclude PosiTap connectors for easy installationAvailable for bullet and flat style turn signalsSold in pairs

Custom Dynamics Billet LED Ellipse Turn Signals- Amber

SKU: , FeaturesAircraft grade T Billet aluminum Chrome or Black Anodized FinishChoice of Cateye or Ellipse DesignStainless Steel Mounting Hardware120 Custom Dynamics Genesis II LEDs with Lifetime WarrantyHardware for Flush Mount or Surface MountIncludes Red,Clear,and Smoke LensInstallation InstructionsEllipse Dimensions: 4.85 Wide x 2.35 High x.92 DeepCateye Dimensions: 4.25 Wide x 2.20 High x.92 Deep

Custom Dynamics Dual Function Truwrap LED Turn Signals and

SKU: , Dualfunction LED fork wraparound turn signalsFeature white running lights with amber LED turn signals in a smoke tubeWhite running light LEDs are automatically deactivated when the turn signal lamp or hazard warning lamp is activated,and automatically reactivated when the turn signal lamp or hazard warning lamp is deactivatedLEDs function with 4way hazards and alarms when bike is on or offEasy to install,just clean surface with enclosed 3M Primer,peel liner from 3M tape,and wrap around the fork tubesInclude 6 PosiTaps for simple tapin installation or solder connectors with enclosed adhesivelined heat shrink tubingInclude stainless steel wire loom and chrome tie wraps for a professional clean installationSold in pairs Buy Now

Custom Dynamics Truwrapz LED Fork Turn Signals For 39mm Fork

SKU: , Finally a simple,easy to install full function LED fork wraparound that can be installed in approximately 30 minutes or less. TruWRAPZ are our amazing,easy to install LED turn signals that feature all of the TruFLEX advantages plus our Patent Pending Eclipze2 module.Dual Intensity running and turn signal Genesis LEDs or connect as Turn Signal Only for European Use.Amber LEDs,with Choice of Clear,Amber,or Smoke Tube.LEDs function with 4 ways hazards and alarms when bike is on or off.Simple to install,just clean surface with enclosed 3M Primer,peel liner from 3M tape,and wrap around your forks.Includes 6 PosiTaps for simple tapin installation or solder connectors with enclosed adhesive lined heat shrink tubing.Includes Stainless Steel Wire Loom and Chrome Tie Wraps for a professional clean installation.TruWRAPZ are 0.34 Wide X 0.30 HighSold in pairs Buy Now

Kuryakyn Panacea Rear Turn Signal Inserts - Flat - Smoke -

SKU: , Our Patent pending circuitry makes these L.E.D. turn signal inserts function as red running lights,red brake lights,and amber turn signals when combined with our Panacea Taillight. Simple plugin installation requires no wiring or alteration to your stock turn signal assemblies.Note: Panacea Turn Signal Inserts can only be used with Panacea Taillights.Sold as a pair. Buy Now

Kuryakyn Panacea Rear Turn Signal Inserts - Bullet - Black

SKU: , Rear turn signal insert.

Car Plastic 18 LED Turn Signal LED Side Marker Light

SKU: , Type:LED; LED Quantity:18; Unit Dimensions / LxWxH (cm):; Net Weight (kg):; Function:Decorative Lamp,Turn Signal Light; Chip Type:SMD LED; Material:Plastic; Features:Waterproof,Decorative,Warning Strobe; Input Voltage:12V; For:Car; IP Grade:IP 65

Baron Custom Accessories TURN SIGNAL MOUNT - Kawasaki Vulcan

SKU: , This polished stainless steel bracket allows you to add custom marker lights to your bike quickly and easily. Bracket installs in existing fender holes below stock tail light. Accepts most aftermarket marker lights,such as our Bullet Marker Lights BA,sold separately.

Baron Custom Accessories Replacement Turn Signal Bulb for

SKU: , Replacement turn signal bulb for the Barons Ultimate Light Bar. Buy Now

Signal Dynamics Back Off Brake Light Signal Module -

SKU: , This compact solid state electronic module converts your ordinary brake lights into your choice of two attention getting visual alerting signals when you apply your brakes:,User Selected Mode One:Emit a visual signal of 3 short light flashes,followed by 1 long light flash 3.5 seconds. The signal automatically repeats itself as long as the brakes are applied. This pattern is not random,but has been selected because of its ability to retain following drivers attention. User Selected Mode Two:Emit a visual signal of 5 short flashes,followed by a steady on light that remains steady on as long as the brakes are applied. Optional:Motorcycle Emergency Flasher or Automobile BackUp Flasher. Most states drivers handbooks recommend that you flash your brakes when slowing or stopping. The BackOFFXP automatically facilitates compliance and enhances safety. Install the BackOFFXP and see how much more effective your brake light can be. Features: Easy Installation Simply install the BackOFFXP Module in line with the brake light wire leading to the brake light and connect a ground wire. Large power capacity 12 volts DC,Maximum Capacity 10 Amps,Compact size 214L x 158W x 58H,Sealed Weather Resistant heat sink case.

Signal Dynamics Back Off Brake Light Signal Module -

SKU: 954, The BackOFF MC Brake light signal module automatically flashes the brake light to capture the attention of following drivers. When installed,the motorcycles brake light becomes significantly more noticeable because the brake light modulates three short flashes followed by one steadyon pulse of four seconds. This pattern automatically repeats itself as long as the brakes are applied. Specifications:12V DC,max. capacity 10A,Sealed weather resistant heat sink case. 214 inch long x 58 inch high x 158 inch wide

Custom Dynamics Cat Eye LED Light Black Case -

SKU: , FeaturesAircraft grade T Billet aluminum Chrome or Black Anodized FinishChoice of Cateye or Ellipse DesignStainless Steel Mounting Hardware120 Custom Dynamics Genesis II LEDs with Lifetime WarrantyHardware for Flush Mount or Surface MountIncludes Red,Clear,and Smoke LensInstallation InstructionsCateye Dimensions: 4.25 Wide x 2.20 High x.92 Deep

Custom Dynamics Magical Wizard LED Wheel Lightz Black -

SKU: LEDs in an oval dish for 360 degree coverageFeatures 7 ft wire leads and choice of chrome or black casePretaped with 3M diecut automotive adhesiveWaterproof constructionMounts on inside of brake caliperFits any bike where back side of brake caliper is flat and there is 58 inch clearance between the caliper and wheelDimensions 2.6 inch X 2 Inch X.5 InchRequires Magical Wizard Kit CUSTDYNAMICSTMWZ01,CUSTDYNAMICSTMWZ02,or CUSTDYNAMICSTMWZ06 Buy Now

Custom Dynamics Trueflex Professional Grade Flexible 75 LED

SKU: , TruFLEX is a new flexible LED lighting strip that has been engineered from the ground up for maximum performance and reliability.,It is unlike any other flexible LED strip on the market today in terms of look,performance,flexibility,reliability,or warranty.,Every aspect of the design has been engineered for performance and reliability. TruFLEX,can be used for running lights,turn signals,tail lights,or brake lights on any 12VDC system including motorcycles,automobiles,trucks,boats,ATVs,and snowmobiles. Our unique tube design with Flat Side Surfaces allow TruFLEX to be mounted on either side surface with our optional side mount kit or mount Standard on the bottom surface.,Available with Red,Amber,or White LEDs in a choice of Clear,Amber,Red,or Smoked Tubing., TruFLEX is a 2 Wire System,Single Intensity Select a Dual Converter to Convert to a 3 Wire Dual Intensity System ie runbrake or runturn Engineered for improved flexibility can be flexed into a small radius circle without warmingheating120 degree viewing angle Genesis surface mounted LEDsUV Stable constructionUnique faceted design increases viewing angle and improves performanceCan be used for running lights,turn signals,tail lights,or brake lights on any 12VDC systemAvailable with Red,Amber or White LEDs in choice of Clear,Amber or Red smoked tubingSold each Buy Now

Custom Dynamics Trueflex Professional Grade Flexible 100 LED

SKU: , TruFLEX is a new flexible LED lighting strip that has been engineered from the ground up for maximum performance and reliability.,It is unlike any other flexible LED strip on the market today in terms of look,performance,flexibility,reliability,or warranty.,Every aspect of the design has been engineered for performance and reliability. TruFLEX,can be used for running lights,turn signals,tail lights,or brake lights on any 12VDC system including motorcycles,automobiles,trucks,boats,ATVs,and snowmobiles. Our unique tube design with Flat Side Surfaces allow TruFLEX to be mounted on either side surface with our optional side mount kit or mount Standard on the bottom surface.,Available with Red,Amber,or White LEDs in a choice of Clear,Amber,Red,or Smoked Tubing., TruFLEX is a 2 Wire System,Single Intensity Select a Dual Converter to Convert to a 3 Wire Dual Intensity System ie runbrake or runturn Engineered for improved flexibility can be flexed into a small radius circle without warmingheating120 degree viewing angle Genesis surface mounted LEDsUV Stable constructionUnique faceted design increases viewing angle and improves performanceCan be used for running lights,turn signals,tail lights,or brake lights on any 12VDC systemAvailable with Red,Amber or White LEDs in choice of Clear,Amber or Red smoked tubingSold each

Custom Dynamics 24-LED Universal Light Bar - STARACPT

SKU: , Superbright amber LEDs for turn signals and superbright red LEDs for running and brakelights are integrated into one sleek light barWork great under lips of fenders,Tour Paks,on license plate frames and tag bracketsCome pretaped with 3M doublesided tape and can be mounted on the back or either side surfaceInclude 3 wires for simple mountingFlexible and waterproof Buy Now

BikeMaster Universal LED Turn Signal Mirror Set - Black -

SKU: , Class 2 super bright integrated LED turn signals. Precision locking adjustments.Sold as a pair. Buy Now

Custom Dynamics Trueflex LED Dual Converter 3 For Single

SKU: , Engineered for improved flexibility can be flexed into a small radius circle without heatingwarming120 degree viewing angle Genesis white LEDs0.5 Inch LED spacingK color temperatureUV stable constructionUnique faceted design increases viewing angle and improves performanceFeatures white LEDs in clear tubingConverters sold separatelySold each Buy Now

Custom Dynamics Trueflex LED Dual Converter 1 For Single

SKU: , Engineered for improved flexibility can be flexed into a small radius circle without heatingwarming120 degree viewing angle Genesis white LEDs0.5 Inch LED spacingK color temperatureUV stable constructionUnique faceted design increases viewing angle and improves performanceFeatures white LEDs in clear tubingConverters sold separatelySold each

Custom Dynamics Replacement Bulb For LED Front Fender Tip

SKU: , Replacement LED White Bulb for Custom Dynamics LED Front Fender Tip Sold Each

Custom Dynamics Magic Flex Cruiser LED Engine Light Kit

SKU: , Features:48 Color Coded Wire in High Temp Protective Black SheathingPretaped with 3M TapeExtremely Versatile,FlexibleHigh Output Surface Mount LEDsLifetime LED Illumination Warranty120 Degree Viewing AngleConformal Coated for 100 Waterproof2,MagicFLEX 24 LED3,MagicFLEX 6 LED1,Complete LED Installation Kit3,Mounting Blocks Buy Now

Custom Dynamics Replacement Bulb For LED Front Fender Tip

SKU: , Replacement LED Amber Bulb for Custom Dynamics LED Front Fender Tip Sold Each

Show Chrome Accessories Front LED Amber Turn Signal Kit -

SKU: , These LED Amber Turn Signal Kits provide a unique honeycomb clear lens to the OEM turn signals. LEDs are brighter than stock bulbs providing added safety. LED circuit boards plug into OEM bulb socket replacing the stock bulb. Each LED circuit board has a polished chrome face plate to enhance illumination. Come as sets.Lights measure 3 in diameter and contain 21 LEDs each. Requires a Dual Load Equalizer,BBP,to return flashers to stock rate,one per kit.Kit works with 120 degree pin and face mount lenses up to cc.

Contact

• Next →