crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out

Crest Audio X-Rack XRM - 10U Rack Mounted Mixer - Monitor Mixer (20 in/12 out)

Crest Audio X-Rack XRM - 10U Rack Mounted Mixer - Monitor Mixer (20 in/12 out)

For sale in excellent condition is this rather rare (and incredibly useful) Crest Audio X-Rack. Designed as an easy and cost effective way to create many individual monitor mixes; with loads of Ins and Outs I'm sure you can use your imagination as to how you could utilise such a mixer. The built in splitter (see rear photo) is a superb feature in this unit. I can also supply a PDF of the owner's manual. I bought it from a London theatre company and it has had light use in my studio - I'm off touring and no longer have use for it. Would be perfect for live bands, technicians, producers, studios and rehearsal rooms. Ā£600, open to offers. Features: - Optimized for "In Ear" monitor systems, capable of generating up to 6 stereo mixes (each input channel with individual level and pan controls) or up to 12 mono mixes. May be used as a stereo or mono monitor mixer or a combination of both, or a matrix mixer or for front-of-house applications. - 12 Mono inputs Plus 4 Stereo mic/line inputs (20 total), all with mic pre amps and individual (per channel) 48 Volt Phantom Power Switches. - Built in splitter system on all 20 XLR mic/line inputs with ground lift switches on each input channel. - Additional common stereo inputs on XLR and 1/4" connectors for use with click or Reference track sends to artists. - Four-band mid sweep EQ on mono and stereo input channels. - 18dB per octave high pass filter on mono input channels. - 12 fully balanced XLR outputs and XLR balanced bus inputs. - 10 Space Rack mount configuration. Ad ID:

Mixer Rack Flight case 10U +2U

Mixer Rack Flight case 10U +2U

Rugged ply flight case for angled 10U mixer plus 2U slot for amplifier or others such as CD player. Photos shown with mixer and amplifier fitted (not included for listed Ā£50) - see other ads for mixer and amp seperate

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: Mixer Rack Flight case 10U +2U
8u x 8u x 10u rack flightcase for mixer and outboard. 60cm x 53cm x 55cm

8u x 8u x 10u rack flightcase for mixer and outboard. 60cm x 53cm x 55cm

Professional road case / flight case with removable doors on the front and back which reveal 8u of rack space front and back with 45cm between them (to give you an idea of the size of gear you could get in there back to back if you so wished. 10u rack on the top, under another removable panel designed for a small mixing desk or turntable. There is 10.5cm clearence between the 10u horizontal rack in the top and the 8u vertical racks front and back. 60cm deep with the doors on, 55cm tall, 53cm wide. See my other ads for a smaller (4u x 4u) case. Ad ID: Delivery Service Consumer Credit

Rhino Shelved 18U Rack Mount Mixer Roller flight Case with 10U Upper Frame on wheels

Rhino Shelved 18U Rack Mount Mixer Roller flight Case with 10U Upper Frame on wheels

Up for sale is our Rhino shelved 18U Roller mixer case. This version also has the 10U retractable Upper Frame along with heavy duty wheels. We purchased this brand new around 6 months ago and it's simply not been used. The condition is excellent - effectively as good as new with no damage to the casing etc. The Rack Case is shock proof, Front Rear and Top Removable with a High Density foam interior. If you're looking at this, you probably already know that Rhino produce exceptionally high quality professional gear and this is no exception. Dimensions - 687 x x 615mm / 53KG Collection only on this please due to size and weight. Located in Metheringham, South Lincoln. Can arrange to deliver within a 40 mile radius for fuel costs, please contact me first. thanks for looking.

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: Rhino Shelved 18U Rack Mount Mixer Roller flight Case with 10U Upper Frame on wheels
American Audio, rack mount, mixer flight case.

American Audio, rack mount, mixer flight case.

American Audio, rack mount, mixer flight case. Used but in good condition. The rack mount is sloping. Lid removes completely. Has a re-writable contents label. Would take a mixer of similar size, front to back, of a Soundcraft EPM6. Ad ID: Delivery Service Consumer Credit

Roland M-120 Line Mixer Rack Mounted

Roland M-120 Line Mixer Rack Mounted

If you're looking for a great clean way of plugging a dozen or so midi instruments through a rack then this mounted mixer is the answer. Roland know a little about recording gear. I've used this mixer for a couple of years and it's never enhanced my sound sources with annoying hisses. Collect from Brackley, Northants or add Ā£15 if you want it delivered (UK Mainland) Read more

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: Roland M-120 Line Mixer Rack Mounted
Spirit SX 20 Channel Mixer with rack mounts

Spirit SX 20 Channel Mixer with rack mounts

Excellent condition including power supply, never gigged, light studio use only. Buyer to collect or arrange courier service. Spirit SX is a flexible 4-bus mixer capable of producing Digital sound quality for both live and recording applications. It includes 20 inputs as standard and 18 outputs (including Auxs and Direct Outs). In addition to mix outs, two sub-buses allow groups of instruments to be sent to multitrack, to additional speakers, or sub-grouped to mix. There are also four stereo inputs for keyboards or other stereo instruments. SX's 8 Direct Outs are fader pre/post switchable so they are equally useful for recording in the studio or at a gig. 12 mic/line inputs are equipped with Soundcraft's UltraMicā„¢ preamp giving a full 60dB or gain range and +22dBu of headroom, meaning that the SX input stage can handle any mic or line device. In the EQ section, the classic British 3-band EQ with swept mid benefits for custom designed pots which give greater control across carefully chosen frequencies. There are 2 auxiliary sends, 2 of which can be assigned pre- or post-fader making them equally useful for monitor-heavy live mixes or effects-heavy recording. In addition, there is a separate Mono Output and 2 subgroup outputs. 100mm faders are used through giving more accurate control at mixdown and all pots have been custom designed to give even and consistent response around the entire sweep. The SX fits all of these features into a rugged, compact frame with integral carry handle which can be optionally rack-mounted in to a 10U space. Applications: Live Sound: Bands, Small Venues, Schools, Conference, Houses of Worship Studio Recording: Digital/Analogue Multitracking (4/8 track), Small/Home Studios, Pre- and Post-Production Submixing Location Sound Key Features: 20 inputs as standard 18 outputs including aux and direct outputs 12 mono channels with high quality UltraMicā„¢ pre-amps 4 stereo inputs 4-bus architecture, with sub-group routable to mix Direct outputs can be switched globally pre- or post-fade Inserts on all mono channels 3-bands 'British' EQ with swept mid-band Stereo 18dB/octave 100Hz high-pass filter to cut stage rumble +48V phantom power Channel On switch for mute control Two sub-group outputs Separate mono sum output Impedance balanced outputs Rugged aluminium chassis with integral carry handle Excellent protection against RF emissions Read more

16 Channel Mixer for Live /DJ, rack mounted in a very sturdy cabinet

16 Channel Mixer for Live /DJ, rack mounted in a very sturdy cabinet

For Sale, a SAMICK 16 channel rack mounted mixer, this is for live/DJ work, but also great for home studio mixing. It is situated in a very robust cabinet (which is worth a much as the mixer!) The cabinet has room for an AMP and other rack effects. It is in full working order. Ad ID: Delivery Service Consumer Credit

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: 16 Channel Mixer for Live /DJ, rack mounted in a very sturdy cabinet
10U Rack Case with slide out d

10U Rack Case with slide out d

10U Rack Case with slide out drawer mesh panels. Good condition ABS ()

DJ Mixer Citronic CDM Input 19" Rack 4-CHANNEL Mixing Disco Karaoke Sound Audio

DJ Mixer Citronic CDM Input 19" Rack 4-CHANNEL Mixing Disco Karaoke Sound Audio

Great Mixer for Disco DJ Karaoke mixing ect. Ā£40 ono. It has been used lots, but it does all work. There is one flip switch knob missing as per pics, also a few of the gain knobs are worn and a few of the LEDs on the Master Volume Indicator dont work. Does not stop performance at all. Technical spec i found off the internet 4 channel 19" (4U) 10 input DJ mixer Dual master mic inputs with individual gain control 3-band shared microphone EQ Individual gain controls on each music channel 3-band EQ per music channel 45mm rail glide replaceable crossfader with defeat function Crossfader assign switches Headphone mix control 12V BNC console light Booth output 10-bar LED monitor Balanced XLR master outputs Fader start compatible Ad ID: Delivery Service Consumer Credit

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: DJ Mixer Citronic CDM Input 19" Rack 4-CHANNEL Mixing Disco Karaoke Sound Audio
Allen & Heath GR05 1U 5-in 4-out rack mount Analogue Zone Mixer

Allen & Heath GR05 1U 5-in 4-out rack mount Analogue Zone Mixer

Allen & Heath GR05 Analogue Zone Mixer (AH-GR05) Features: 2 mic inputs 3 stereo inputs 4 XLR outputs Routing Matrix Remote Controllable Ducking Expandable Lock out system Internal power supply Perfect working order, used for around 3 weeks. Comes with power lead and printed manual. I'm also going to throw in a 1U double RCA in/output panel (will upload pictures of it) Has been in an 8U rack connected to a Numark iDec Ā£500+ new Priced to sell @ Ā£300 Collection from Perivale UB6 (just off the A40 and on the Central Line) where it can be seen working and tested before purchase. Manufacturer Description: The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. ## Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained systems. Inputs: -22 to -58dBu, ohms, microphone; -28 to +8dBu, ohms, with pad selected for line level; -10dBV or +4dBu, ohms, stereo line. Response: 20Hz-50kHz, +0/-1dB. Distortion: %. Noise: -128dB RMS EIN, 150 ohm source, 22Hz-22kHz, microphone; -91dBu, preamp at 0dB gain, line; better than -86dB mix noise (all channels routed). Output: +20dBu maximum, 22k ohms load, balanced. Power consumption: 18VA maximum. Dimensions: 483 x 260 x (w x d x h) mm. Weight: 4kg Ad ID: Delivery Service Consumer Credit

Allen & Heath GR05 1U 5-in 4-out rack mount Analogue Zone Mixer

Allen & Heath GR05 1U 5-in 4-out rack mount Analogue Zone Mixer

Allen & Heath GR05 Analogue Zone Mixer (AH-GR05) Features: 2 mic inputs 3 stereo inputs 4 XLR outputs Routing Matrix Remote Controllable Ducking Expandable Lock out system Internal power supply Top condition, perfect working order, used for around 3 weeks. Comes with power lead and printed manual. I'm also going to throw in a 1U double RCA in/output panel (will upload pictures of it) Has been in an 8U rack connected to a Numark iDec Ā£500+ new Priced to sell @ Ā£350 No offers! Collection from Perivale UB6 (just off the A40 and on the Central Line) where it can be seen working and tested before purchase. Manufacturer Description: The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained systems. Inputs: -22 to -58dBu, ohms, microphone; -28 to +8dBu, ohms, with pad selected for line level; -10dBV or +4dBu, ohms, stereo line. Response: 20Hz-50kHz, +0/-1dB. Distortion: %. Noise: -128dB RMS EIN, 150 ohm source, 22Hz-22kHz, microphone; -91dBu, preamp at 0dB gain, line; better than -86dB mix noise (all channels routed). Output: +20dBu maximum, 22k ohms load, balanced. Power consumption: 18VA maximum. Dimensions: 483 x 260 x (w x d x h) mm. Weight: 4kg. Ad ID:

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: Allen & Heath GR05 1U 5-in 4-out rack mount Analogue Zone Mixer
Allen & Heath GR05 1U 5-in 4-out rack mount Analogue Zone Mixer

Allen & Heath GR05 1U 5-in 4-out rack mount Analogue Zone Mixer

Allen & Heath GR05 Analogue Zone Mixer (AH-GR05) Features: 2 mic inputs 3 stereo inputs 4 XLR outputs Routing Matrix Remote Controllable Ducking Expandable Lock out system Internal power supply Top condition, perfect working order, used for around 3 weeks. Comes with power lead and printed manual. I'm also going to throw in a 1U double RCA in/output panel (will upload pictures of it) Has been in an 8U rack connected to a Numark iDec Ā£500+ new Priced to sell @ Ā£300 Collection from Perivale UB6 (just off the A40 and on the Central Line) where it can be seen working and tested before purchase. Manufacturer Description: The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. ## Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained systems. Inputs: -22 to -58dBu, ohms, microphone; -28 to +8dBu, ohms, with pad selected for line level; -10dBV or +4dBu, ohms, stereo line. Response: 20Hz-50kHz, +0/-1dB. Distortion: %. Noise: -128dB RMS EIN, 150 ohm source, 22Hz-22kHz, microphone; -91dBu, preamp at 0dB gain, line; better than -86dB mix noise (all channels routed). Output: +20dBu maximum, 22k ohms load, balanced. Power consumption: 18VA maximum. Dimensions: 483 x 260 x (w x d x h) mm. Weight: 4kg Ad ID: Delivery Service Consumer Credit

Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions

Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions

Following kit for sale: Pulse 19in 7U flightcase rack (I don't have the front and back covers, the rack was solely used to house the below setup) - Allen & Heath GR05 5input 4output Analogue Audio Zone Mixer - Numark iDEC Playback and Recodring interface for iPod/phone - 2x 6input switchable power extension (1U) - lockable 2U metal draw - 1U dual RCA in/output Everything tested and perfect working order, in very good condition. The entire unit has only been used for about 3 weeks. Priced to sell @ Ā£450 and I'm not open to offers at all. Can be seen working / tested before purchase. Collection from Perivale UB6 (just off the A40) Sold seperately too, the Zone Mixer can be found among my ads. Numark iDEC Large, easy-to-use transport controls and selection wheel Universal dock for iPod syncs directly with iTunes Recording inputs with clip indication make recording to iPod a breeze Record directly to iPod (5th gen & Classic) and iPod nano (2nd or 3rd gen) Inputs: stereo line (RCA) Outputs: stereo line (RCA), S-Video, Composite video USB audio interface 19" 2RU rack-mountable design Solid steel industrial construction iDEC gives you professional rack integration of your iPod into any live DJ or music rig. With high-performance digital audio and video playback, quality audio recording, and its convenient interface with both the 19-inch rack world and docking to your computer. iDECā€™s universal dock for iPod lets you can play audio and video from any docking iPod out through integrated outputs, or instantly capture incoming audio at CD-quality 44.1 kHz sampling rate. Large transport controls enable easy iPod operation even on stage or in dark environments. Bands will find iDEC a great addition to their setups because it enables simple, convenient recording of gigs and rehearsals, and solo performers can use iDEC as a player for backing tracks on iPod. Heath & Allen GR05 The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained system Ad ID:

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions
Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions

Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions

Following kit for sale: Pulse 19in 7U flightcase rack (I don't have the front and back covers, the rack was solely used to house the below setup) - Allen & Heath GR05 5input 4output Analogue Audio Zone Mixer - Numark iDEC Playback and Recodring interface for iPod/phone - 2x 6input switchable power extension (1U) - lockable 2U metal draw - 1U dual RCA in/output Everything tested and perfect working order, in very good condition. The entire unit has only been used for about 3 weeks. Priced to sell @ Ā£300 Can be seen working / tested before purchase. Collection from Perivale UB6 (just off the A40) Sold seperately too, the Zone Mixer can be found among my ads. Numark iDEC Large, easy-to-use transport controls and selection wheel Universal dock for iPod syncs directly with iTunes Recording inputs with clip indication make recording to iPod a breeze Record directly to iPod (5th gen & Classic) and iPod nano (2nd or 3rd gen) Inputs: stereo line (RCA) Outputs: stereo line (RCA), S-Video, Composite video USB audio interface 19" 2RU rack-mountable design Solid steel industrial construction iDEC gives you professional rack integration of your iPod into any live DJ or music rig. With high-performance digital audio and video playback, quality audio recording, and its convenient interface with both the 19-inch rack world and docking to your computer. iDECā€™s universal dock for iPod lets you can play audio and video from any docking iPod out through integrated outputs, or instantly capture incoming audio at CD-quality 44.1 kHz sampling rate. Large transport controls enable easy iPod operation even on stage or in dark environments. Bands will find iDEC a great addition to their setups because it enables simple, convenient recording of gigs and rehearsals, and solo performers can use iDEC as a player for backing tracks on iPod. Heath & Allen GR05 The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained system Ad ID: Delivery Service Consumer Credit

Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions

Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions

Following kit for sale: Pulse 19in 7U flightcase rack (I don't have the front and back covers, the rack was solely used to house the below setup) - Allen & Heath GR05 5input 4output Analogue Audio Zone Mixer - Numark iDEC Playback and Recodring interface for iPod/phone - 2x 6input switchable power extension (1U) - lockable 2U metal draw - 1U dual RCA in/output Everything tested and perfect working order, in very good condition. The entire unit has only been used for about 3 weeks. Priced to sell @ Ā£400 Can be seen working / tested before purchase. Collection from Perivale UB6 (just off the A40) Sold seperately too, the Zone Mixer can be found among my ads. Numark iDEC Large, easy-to-use transport controls and selection wheel Universal dock for iPod syncs directly with iTunes Recording inputs with clip indication make recording to iPod a breeze Record directly to iPod (5th gen & Classic) and iPod nano (2nd or 3rd gen) Inputs: stereo line (RCA) Outputs: stereo line (RCA), S-Video, Composite video USB audio interface 19" 2RU rack-mountable design Solid steel industrial construction iDEC gives you professional rack integration of your iPod into any live DJ or music rig. With high-performance digital audio and video playback, quality audio recording, and its convenient interface with both the 19-inch rack world and docking to your computer. iDECā€™s universal dock for iPod lets you can play audio and video from any docking iPod out through integrated outputs, or instantly capture incoming audio at CD-quality 44.1 kHz sampling rate. Large transport controls enable easy iPod operation even on stage or in dark environments. Bands will find iDEC a great addition to their setups because it enables simple, convenient recording of gigs and rehearsals, and solo performers can use iDEC as a player for backing tracks on iPod. Heath & Allen GR05 The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained system Ad ID: Delivery Service Consumer Credit

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions
PreSonus SL-RACK EARS StudioLive  Digital Mixer Rack Mounting Ears

PreSonus SL-RACK EARS StudioLive Digital Mixer Rack Mounting Ears

PreSonus SL-RACK EAR KIT StudioLive Digital Mixer Rack Mounting Ears SKU: PRE16-SL-RACK EAR KIT Rack ears mounting kit For: StudioLive Mixer Includes: Left Ear Right Ear Ad ID: Delivery Service Consumer Credit

TECHNICS SH-DJ AUDIO MIXER & SOUND LAB DSM1 MIXER

TECHNICS SH-DJ AUDIO MIXER & SOUND LAB DSM1 MIXER

Technics SH-DJ & soundlab dsm1 mixer These legendary mixers were a staple of dmc culture back in the late 80s early 90s. The technics mixer(includes power cable) is missing the back bit (see picture above) not that it matters. Can easily find the part with a bit of persistence. Sound lab mixer has to power cable. Both are in really good condition concodering how old they are. Lots of wires not sure what goes with what. Delivery possibly available if you cover petrol cost.

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: TECHNICS SH-DJ AUDIO MIXER & SOUND LAB DSM1 MIXER
Quality Flightcase made in london (8u x 6u Mixer rack) v.g.c

Quality Flightcase made in london (8u x 6u Mixer rack) v.g.c

Quality Flightcase made in london (8u x 6u Mixer rack) v.g.c screws included vgc.no rips to tolex 4 x 10pence sixed holes drilled in bottom/ back for cable runs Padlock on one handle i can't find key for

Maker hart Portable Audio Mixer 3.5mm Just Mixer 2 Gold

Maker hart Portable Audio Mixer 3.5mm Just Mixer 2 Gold

Maker hart Portable Audio Mixer 3.5mm Just Mixer 2 Gold Brand new, Genuine Maker hart Portable Just 2 Mixer Features VERSATILE & COMPACT - The perfect way to mix multiple sound sources incl. smartphones, tablets, computers, MP3 players, microphones, instruments, Amazon Echo, etc. STEREO 3 IN / 2 OUT CONFIG - 3 stereo channels (3.5mm / 1/8") incl. 1 AUX IN; 2 output jacks (3.5mm) AMPLIFIER GAIN - Increase input sources' volume levels by up to 45dB with LED indicator built in to monitor signal level EQ CONTROL - Fixed equalization knobs for the 2 main channels help shape the bass / treble tones to your liking USB AUDIO INTERFACE - The USB port simultaneously powers the mixer and can output for recording directly to your computer Meet the new and improved JUST MIXER 2! After the outstanding success from launching the original JUST MIXER, Maker Hart took into account user feedback and preferences to create a revamped mixer designed to better fulfil your everyday mixing needs. It is ideal for those who need a reliable and affordable option to combine audio from up to 3 stereo devices through 3.5mm input jacks and AUX cables. Now with two 3.5mm output jacks, you can plug in both headphones and/or speakers. Ultralight and compact, this portable mini mixer can be used just about anywhere, including on the go and in the car. What's Changed? Maximum amplification for CH1 & 2 upgraded from 20dB to 45dB! AUX input is 20dB USB Audio Interface: Output audio through USB cable directly to computer for better quality recording; compatible with multiple OS including Windows & Mac OS Replaced Balance Knobs with EQ Knobs, so users can adjust balance of frequencies Added a 3.5mm separate headphone output with volume control New sleek and stylish gold / silver finish USB Cable & Adapter included *As per design, JUST MIXER 2 is more suited for use with non-premium headphones and sound systems. Due to increased gain, limit additional noise levels by leaving volume of input device on low, and increase volume levels on mixer accordingly. CONTROLS AND JACKS 3 x 3.5mm STEREO INPUT (can be split into 4 x 1/4" mono; adapter required) 2 x 3.5mm STEREO OUTPUT POWER / OVERLOAD INDICATOR (LED shows power and distortion level) EQ KNOBS for CH1 and 2 MASTER and CHANNEL VOLUME SLIDERS USB POWER / OUTPUT JACK SPECIFICATIONS Gain: Max. 45dB Power: 5V micro USB power source Weight & Dimensions: 3.2oz / 92g; 2.5 x 4.1 x x 6.5 x 2.4cm Package Contents: JUST MIXER 2, USB to Micro USB Cable, 5V/1A Adapter, Pouch, Owner's Manual Please see my other items for sale

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: Maker hart Portable Audio Mixer 3.5mm Just Mixer 2 Gold
MIXER compact audio mixer phan

MIXER compact audio mixer phan

MIXER compact audio mixer phantom power XLRs + 1/4 inputs comes with mains adaptor 20 sub-zero ()

MIXER RACK CASE

MIXER RACK CASE

CUSTOM PLY MADE MIXER CASE WITH REMOVABLE TOP AND FRONTS. HAS RAISED TOP FOR MIXER WITH FITTED SURGE PROTECTED GANG SOCKET INSIDE. ROOM UNDERNEATH FOR EFFECTS OR MINI DISC PLAYER MEASURES 50 CMS X 50 CMS X 40 CMS. ANY TRIAL WELCOME Read More

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: MIXER RACK CASE
Reptile rack 20 x 4 litre hatching rack

Reptile rack 20 x 4 litre hatching rack

20 x 4 litre Hatching rack with heat mats.... No stat so you will need one Collection from Bradford or could deliver locally Read more

Gator Mixer Rack Case

Gator Mixer Rack Case

This is a great quality mixer rack case. The top fits 10 units. The front fits 2 units and the back fits 6 units. One of the rivets is missing of a latch for the top of the box. The latch still works fine in it's current state. Ad ID: Delivery Service Consumer Credit

Related products crest audio x rack xrm 10u rack mounted mixer monitor mixer 20 in12 out: Gator Mixer Rack Case
Rack mixer flight case

Rack mixer flight case

Selling rack mixer flight case as new condition came from flightcase warehouse on casters, please note this is for the case only, although the Midas mixer is for sale, Read More

Contact