inboard marine engine installation fittings
Removed from 19 foot sailing boat which I have just purchased and from the log, low hours as boat mainly sailed. Boat was left in car park last winter but due to owners poor health, cover was not checked and engine partially submerged in fresh water, As I will be converting the boat back to the original outboard version, engine removed and is being sold for spares or repair as a separate listing. Also I have removed all of the fittings that linked to the engine from the boat and should be just about everything needed for a new installation. Items include brass stern tube, prop and shaft, exhaust box and pipe,fuel tank and pipe work, wiring loom and control lever together with the other items shown. Engine is a Yanmar 1GM10 but possibly most of the fittings could be used with a different engine? All of the items shown in the pictures are included and the exhaust hose in total is just over 5m. Most of the jubilee clips are there and all of the items appear to be in a good used condition. The only thing missing is the battery isolator switch as that was heavily corroded on the terminals. Not sure how much all of this would cost to buy new but I would imagine a fair bit. Please note that at this stage would prefer the whole lot to go in one go and not be split up. Ā£300 ono Ad ID: Delivery Services Consumer Credit