cables to go rg6u quad shield in wall coaxial cable

Cables To Go RG6/U Quad Shield In Wall Coaxial Cable

Impact Acoustics Dual RG6/U Quad Shield is ideal for antenna cable television and satellite installations. Make two cable runs at one time for dual LNB satellite or satellite and antenna installations. This cable is 18AWG copper clad steel center conductor surrounded by a foam polyethylene dielectric. A bonded aluminum foil and 60% aluminum braid over another foil and 40% aluminum braid provide 100% shield coverage. This UL listed cable meets UL and CUL specifications for CL1 CL2 CM CMX and CMG installa

SOLID COPPER RG6 QUAD SHIELD COAXIAL CABLE

CABLE INTERNET DIRECTV SATELLITE APPROVE IN-WALL RATED

COAXIAL TWIN CABLE RG6U CO-AX - TELEVISION SATELLITE COMMUNICATIONS

40 METRES of BRAND NEW TWIN COAX CABLE. £ Buyer to collect in LARNE. Product Info: Jacket Colour: Black Wire Gauge: 18AWG Conductor Area CSA: 0.78mm² No. of Max Strands x Strand Size: 1 x 1.01mm Jacket Material: PVC Conductor Material; Copper Coated Steel External Diameter 6.6mm Coaxial Cable Type: RG6U Impedance: 75ohm...... PLEASE NOTE: THIS IS CABLE ONLY. Ad ID:

CHARITY SALE - RG6U Foam AL Coaxial Cable 14W45A 082M

RG6U Foam AL Coaxial Cable 14W45A 082M Buyer collects from Dinas Powys CF64 Ad ID: Delivery Service Consumer Credit

RG6 TRI- SHIELD FBF 77% COAXIAL CABLE

Amphenol RG6 TRI-but 00FT WHITE PVC SHEATH Please note we have used a very small amount it is not the full 305m COLLECTION ONLY Ad ID: Delivery Service Consumer Credit

RG6 TRI- SHIELD FBF 77% COAXIAL CABLE

Amphenol RG6 TRI-SHIELD FBF 77% COAXIAL CABLE 3O5M/FT WHITE PVC SHEATH Please note we have used a very small amount it is not the full 305m Probably around 300m COLLECTION ONLY Ad ID: Delivery Service Consumer Credit

Cables To Go Quad Hex Crimp F Connector

These hex crimp F connectors are commonly used for antenna cable television and satellite television installations. Made from anodized brass to provide years of life free from oxidation. The nut on these connectors is larger than most F connectors available providing more threads for better shielding and a larger surface to finger tighten the connector. Easy installation using the # hex crimp tool. Features: Anodized brass for long life. More threads inside the nut provide better shielding. Larger nut surface to easily finger tighten the connector.

Cables To Go Telephone Cable

The High-Speed Internet Modem Cable from Cables To Go provides for the fastest internet connection possible. Ordinary phone cables often use low-quality materials with little or no shielding which can result in poor performance. The High-Speed Internet Modem Cable connects your analog or digital modem to a telephone wall jack allowing for data transmission up to 10 times faster. Connectors: RJ11 Male to RJ11 Male. Up to 10 times faster than an ordinary phone cable providing quick data transfer. 24k gold connectors provide corrosion resistance that provides for maximum conductivity. Snagless molded strain relief provides increased flexibility and durability. Ultra-flexible jacket makes installation easy. Double-shielded with foil and braid shield which reduces interference for high-speed error-free data transfer. Twisted-pair construction assists to minimize crosstalk ensuring high-speed error-free transmission. Compatible with analog and digital (DSL/ISDN) modems. Works great with telephones answering machines and fax machines.

Cables To Go Modem Cable

Cables To Go s Modem Cables are fully molded and foil shielded. This design ensures long lasting data integrity regardless of modem baud rates. The hoods have office quality appearance with long easy-grip slotted thumbscrews for neat and easy connections all with an industrial strength robustness. With lengths available up to 25ft your modem can be placed to organize your work area for maximum efficiency and comfort. For custom lengths or special handshaking configurations just give us a call. Connectors: DB25 Female to DB25 Male. Fully molded and foil shielded to protect against EMI/RFI interference. Connect a PC computer to an external modem via the DB25 serial port.

Cables To Go Serial Cable

Use your existing serial or modem cables with the help of Cables To Go s Serial Adapters. Whether you need to convert existing DB9 ports to DB25 or vice versa this is an inexpensive alternative to buying new cables. With their molded design providing a solid connection each adapter is shielded against outside EMI/RFI interference while giving you the flexibility to meet your connectivity needs. Connectors: DB9 female to DB25 male. Converts a DB9 male into a DB25 male or a DB25 female into a DB9 female. Fully shielded against outside EMI/RFI interference. Straight-through design. 100% Compatible with all serial devices.

Cables To Go Cable Tie

Cable Ties make wiring and cable installations clean and well organized. Used to bundle and secure wire and cable these cables ties are manufactured for maximum performance and quality. Cable ties are very easy to use; simply zip and snip. 100 cable ties per package. Features: Keep cable bundles clean and well organized. Simple to install; zip-n-snip.

Cables To Go Cable Bracket

Impact Acoustics(TM) Wiring System Brackets are an efficient and effective distribution solution for your home or small office audio/video/telephony/control system. Ideal for small systems in homes and apartments the smaller size also makes these brackets ideal for sub-system breakpoints within your home theater or distribution system. Brackets are available in 11in and in heights are single module width and include a wrap-around cover. These brackets accept Impact Acoustics(TM) structured wiring modules and have been designed to accommodate other common modules as well. Features: Two sizes: 11in and in. Single module width. Ideal for subsystems such as IR distribution. Includes high-impact wrap-around cover. Surface mount only.

Cables To Go 180° To 90° Serial ATA Cable

When connecting serial ATA devices to your motherboard or host controller you want a permanent solution. The last thing you need is a cable that could fatigue or even fail over time because of bending or stress occurring right at the critical connection. Our angled connectors deliver the cable at a more desired angle and are fortified to keep the cable lined up straight. So you`ll continue to receive the performance you expect from your serial ATA drive long after you ve plugged it in. We offer a variety of serial ATA cables which minimize clutter increase airflow and provide MAXIMUM transfer rates. Serial ATA cables by Cables To Go are designed to handle the differential signals implemented in today`s technology. This ensures increased throughput and reduced data packet loss. The 7-pin Serial ATA cables permit higher data transmission rates reduce crosstalk and improve signal integrity. And these cables reduce overheating and save internal space within the CPU unit for easy movement when adding or removing hard drives PCI cards or other adapters. Features: Connectors: Two 7-Pin Serial ATA Females; 180 degree to 90 degree. Devices Supported: 1. Cable Type: 90 Degree to 180 Degree 7 Conductor. Cable Length: 36 inches. Angled connectors ensure more compact look and reduce potential fatigue or cable failure. Supports transfer rates of up to 3G depending on the peripherals used.

Cables To Go M1 to DVI-D with USB Cable

M1 cables (also known as EVC or PandD cables) work with projectors and other devices with the new universal M1 connector. M1 can carry both digital and analog signals as well as USB. Many new projectors on the market utilize this new technology to provide the flexibility of connecting to either VGA or DVI inputs. Plus the USB component allows the use of a wireless presenter -- with just one cable! Compatible with the following projectors: Ask Proxima: C110 C130 C160 C170 C180 C410 C420 C440 C450 C460 M1 M2 M2+ C445 C450 C175 C185 DPX DPX DPX DPX. Dell: MP MP MP MP. Hitachi: CP-X CP-X. InFocus: LP120 LP130 LP335 LP340 LP340B LP350 LP500 LP530 LP540 LP600 LP630 LP640 LP70 LP70+ LP815 LP820 LP840 LP850 LP860 LP930 LS110 X2 X3 SP777 SP SP SP SP SP SP IN32 IN34 IN72 IN74EX. Toshiba: TDP-T3 TDP-S3 TDP-S2V TDP-T1 TDP-S1-US TPD-B1-US TDP-P4 TDP-P3-US TLP-XU. Viewsonic: PJ. *Check your product manual or our website for additional compatibilities.

Cables To Go IDC Female to DB-9 Male Cable Adapter

Ensure smooth data flow from either your serial or parallel port with an I/O Add-a-Port Adapter Cable from Cables To Go. Choose DB9-pin or DB25-pin male serial ports. These adapter cables connect to the motherboard or I/O adapter via flat ribbon cabling and attach to a port knockout on your computer case. Connectors: Internal 10-pin IDS dual row to external DB9 Male. Straight-through configuration. Compatible with Intel D815EEA and like motherboards. Application: Serial.

Cables To Go Cat5e Patch Cable

Today s advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data voice and video. Cables To Go s Enhanced CatMhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVC. Molded Snag-Free boot prevents unwanted cable snags. Applications: BASE-T; 100 BASE-T; 10 BASE-T (IEEE Mbps Token Ring (IEEE VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T Mbps ATM. Voice. Designed For: Network Adapters Hubs Switches Routers DSL/Cable Modems Patch Panels and other twisted-pair applications. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certifications: TIA/EIA; UL Listed.

Cables To Go DB9 Extension Cable

Use CTG s DB9 extension cables to extend your existing connections. Each extension connects all 9-pins in a straight-through configuration to support multiple applications. Plus every extension from CTG comes fully shielded to prevent against unwanted EMI/RFI interference and its fully molded design delivers excellent strain relief. Choose from various lengths and genders but don t forget that CTG specializes in custom configurations too. Primary InformationCable Type€:€€Serial extender€Cable Technology€:€€Shielded€Dimensions&MiscellaneousLength€:€€6 feet€Color€:€€Beige€ConnectionLeft Connector Gender€:€€Male€Right Connector Gender€:€€Female€Left Connector Type€:€€9 pin D-Sub DB-9 €Right Connector Type€:€€9 pin D-Sub DB-9 €Service&SupportService & Support Type€:€€Limited lifetime warranty€UNSPSC CodeUNSPSC Code€:€€€Product IDUPC:€€Manufacturer Part:€€

Cables To Go Serial270 Serial Cable

Bring ultimate flexibility to RS-232 applications with the patented Serial270o DB9 Extension Cables by Cables To Go. The 270. DB9 connector on each end rotates from side to side in almost a complete circle allowing easy positioning of the cable to fit the installation. The connectors feature detents or (click-stops every 90 degrees ensuring signal integrity is maintained. The oversized thumbscrews are slotted for easy connection to equipment. With Serial270o the days of not having the right connector orientation on your cables are over. FeaturesRotating 270 degree connectors on each end move from side to side in almost a complete circle Oversized slotted thumbscrews make connecting to equipment easyConnectors: DB9 Female to DB9 FemaleUsed to convert an existing DB9M/M cableFully shielded to prevent unwanted EMI/RFI interferenceAll lines wired straight through Warning: Forcing the connector past the click-stops will break the connector and possibly damage the cable.

Cables To Go Cat5e Patch Cable

Today s advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data voice and video. Cables To Go s Enhanced CatMhz Crossover Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Cables To Go 350Mhz Crossover Patch cables are available in a variety of colors to easily color-code your network installation and are labeled as crossover for easy identification. With a Cables To Go Enhanced CatMhz Crossover Patch Cable and a network adapter you can easily network two Windows-based computers in a Peer-to-Peer Networking configuration. In addition this cable can be used for hub-to-hub transceiver-to-transceiver or repeater-to-repeater ethernet connections. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 4-pair 24 AWG Stranded Copper. Jacket: PVC. Applications: BASE-T; 100 BASE-T; 10 BASE-T (IEEE Mbps Token Ring (IEEE VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T Mbps ATM. Designed For: Peer-to-peer hub-to-hub transceiver to transceiver or repeater to repeater ethernet connection. Exceeds Category 5e specifications. Wired: TSB 568B (ATandT 258A). Certifications: TIA/EIA; UL Listed.

Cables To Go Cat6 Patch Cable

With Cables To Go s CatMhz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data voice and video. These cables will deliver stable performance to 550 MHz. Each comes UL verified and meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1 draft 9 standards. These cables will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go CatMhz Snagless Patch Cables are available in a variety of colors to easily color-code your network installation. Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. Molded Snag-Free boot prevents unwanted cable snags. Applications: Gigabit BASE-T; 100 BASE-T; 10 BASE-T (IEEE Mbps Token Ring (IEEE VG-AnyLAN. 100 Mbps TP-PMD (ANSI X3T Mbps ATM. Voice; T1. High bandwidth applications such as 622 ATM Wideband. Designed For: Network Adapters Hubs Switches Routers DSL/Cable Modems Patch Panels and other twisted-pair applications. Certifications: UL Listed. Standard: Category 6 TIA/EIA- 568-B-2.1 draft 9.

Cables To Go SCSI-3 Cable

Ultra SCSI or SCSI-3 is the latest of the ever improving SCSI standards and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2 except it accommodates addressing up to 32 devices over a 16 bit single cable bus. This new style also increases data through-put up to 20 Mbps in single-ended applications. Single-ended SCSI-3 is limited to 4 devices over 3 meters or 8

Cables To Go Cat6 Snagless Crossover Cable

Fast fast fast - the three words that describe Cables To Go s Cat6 network cables. Perfect for distributing data voice and video these 550MHz rated patch cables ensure you always have the necessary throughput to handle today s and tomorrow s bandwidth-intensive applications. Each cable is fully tested and quality inspected ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1 draft 9 standards are met. Note: These cables are for ethernet only and wil not work for gigabit ethernet since only two pairs of this cable are crossed. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire which ensures error-free transmission! This is accomplished by bonding together each of the individual pairs helping to maintain the twist-spacing throughout the line right up to the termination. Construction with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. Our all-new molded snag-free clip prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief so that the cable is not damaged even when pulled on excessively. Features: Connector: 50-micron gold plated RJ-45 Male to Male. Conductor: 24 AWG Stranded Copper. Jacket: PVC. All-new molded snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports. Crossed pin configuration allows you to connect two computers peer-to-peer without the need for a hub or switch. Perfect for connecting network switches and hubs without an uplink port to other switches and hubs.

Cables To Go Cat. 6a Patch Cable

Experience the next generation of networking with Cat6a Patch Cables from Cables To Go. These network cables enable 10-Gigabit data transmission over a 4-connector twisted-pair copper cable allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is

Cables To Go Fiber Optic Patch Cable

Our multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. High-quality LC to ST Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the wo

Cables To Go Fiber Optic Patch Cable

Our multicolored fiber optic patch cables enable you to quickly identify various applications present in your fiber distribution system. The connectors on each end are color-coded for easy identification in a congested patch field. We offer high-quality LC to SC Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet Fibre Channel ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the

Contact

• Next →