bespoke vintage 2 way bookshelf loudspeakers in vgc and fwo

Bespoke Vintage 2-Way Bookshelf Loudspeakers in VGC and FWO

Bespoke Vintage 2-Way Bookshelf Loudspeakers in VGC and FWO. Great sounding speakers with accurate tight bass in a rigid heavy sealed cabinet. Built locally during the early 70s when speakers were commonly sold in kit/ component form. Vintage Wharfedale drivers and crossover. You can make out the distinctive lilac tweeter widely used by Wharfdale in their speakers of the period. Happy to demonstrate and compare.

Bespoke Vintage 2-Way Loudspeakers

Bespoke Vintage 2-Way Bookshelf Loudspeakers in VGC and FWO. Great sounding speakers with accurate tight bass in a rigid heavy sealed cabinet. Built locally during the early 70s when speakers were commonly sold in kit/ component form. Vintage Wharfedale drivers and crossover. You can make out the distinctive lilac tweeter widely used by Wharfdale in their speakers of the period. Happy to demonstrate and compare. Read More

KEF Concord IV Floor Standing Loudspeakers in FWO/ VGC

KEF Concord IV is a free-standing loudspeaker system incorporating many features resulting from KEF’s programme of advanced research and development. Concord IV offers precise and stable stereo reproduction for the serious listener together with ample volume for the most extreme domestic use. A maximum acoustic output of 107dB spl can be obtained on programme peaks. Concord IV Features: High power handling capacity: 100 watts per channel. High acoustic output: 107dB spl on programme peaks. For use with amplifiers of more than 10 watts per channel. Interchangeable grille covers in black, brown, beige, blue, red green or grey to suit your decor. Concord IV Specifications Frequency range: - 60Hz to 20kHz ± 3dB at 2m on reference axis (-10dB at 40Hz and 25kHz); Directional characteristics: - Horizontal: within ± 2dB of axial response up to 10kHz for ± 20º - Vertical: within ± 2dB of axial response up to 20kHz for ± 5º; Maximum output: - 107dB spl on programme peaks under typical listening conditions; Character sensitivity level: - 87dB spl at 1m on measuring axis for pink noise input of 1W; Distortion: - Second harmonic: less than 2% from 20Hz to 80Hz, less than 1% from 80Hz to 20kHz; Third harmonic: less than 1% from 20Hz to 20kHz; Measured at 1m on measuring axis at mean spl of 90dB, anechoic conditions Enclosure type: - Closed box Programme rating: - 100W Maximum continuous sinusoidal input 28V rms from 60Hz to 2kHz reducing 10Vrms from 2.5kHz to 20kHz Minimum amplifier requirement: - 10W Nominal impedance: - 8 ohms Resonance frequency: - 68Hz Total system Q: - 0.8 Dimensions: - 692 x 280 x 315 mm Weight: - 12.7kg (28lb) Internal volume: - 38 litres Concord IV Benefits The addition of quality loudspeakers to an existing rack system or music centre - or even a portable radio - will dramatically improve sound quality. As loudspeaker specialists, KEF concentrate on the design and production of high fidelity loudspeakers, and have employed the latest computer aided analysis techniques to develop Concord IV. With and amplifier output of as little as 10 watts per channel, Concorde IV will produce more than enough volume to fill a generous sized room. With larger amplifiers, considerably louder volume levels can be achieved whilst maintaining realistic tonal quality. Concord IV is a medium-sized (38 litres) loudspeaker system combining a 25mm soft dome tweeter with two 200mm bass units to give extended bass performance down to 40Hz. The two identical bass units are arranged to work together over the lower part of the frequency range ensuring reduced distortion and remarkable power handling capability. To obtain an even distribution of sound a new filter system progressively reduces the output of the lower bass unit above 200Hz. At crossover frequency only one bass unit is operating with the tweeter. To allow the sound to reach the listener directly without troublesome reflections from walls, floor ceiling the drive units are arranged within the enclosure so that the full frequency response is enjoyed when the loudspeakers are positioned between 9” and 12” from the floor. Happy to demonstrate

Wharfdale Delta 30 Loudspeakers in FWO

A pair of British design and built Wharfdale Delta 30 Loudspeakers in FWO. Happy to demonstrate. Read More

Pioneer PL-12D Turntable in FWO and VGC

Pioneer PL-12D Turntable in FWO and VGC Great sounding and easy to use belt driven turntable. Specifications: Motor: 4-pole synchronous motor Drive: belt driven Speeds: 33 and 45rpm Speed accuracy: 1.0% or less Wow and flutter: 0.1% WRMS Rumble: 47dB Platter: 30cm aluminium alloy Tonearm: s-shaped pipe Effective length: 221mm Dimensions: 430 x x 349mm Weight: 7.5kg Happy to demonstrate

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg Read More

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC

Vintage TEAC A-360 Stereo Cassette Deck - FWO, VGC Highly regarded and sought after top loader classic. Specifications: Heads: Two: erase and record/playback; 4 track 2 channel stereo Type of Tape: Cassette tape C-60 and C-90 (Philips type) Tape Speed: 1-7/8 ips Motor: Hysteresis synchronous outer-rotor motor Wow and Flutter: 0.07% Frequency Response: - Hz (Chromium dioxide tape) Hz (Hi-Fi tape) Hz (regular tape) Signal to Noise Ratio: 58 dB (with Dolby process); 50 dB Fast Winding Time: Approximately 95 seconds for C-60 Inputs: - Line: 0.1 V, ohms or more Microphone: 0.25 mV/-72 dB ( ohms) Outputs Line: 0.3 V for load impedance of ohms or more Headphones: 8 ohms Power Requirements: V AC, Hz, 17.5W Type: 2-head, single compact cassette deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 1 x record/playback, 1 x erase Motor: hysteresis synchronous Tape Type: type I, CrO2 Noise Reduction: B Frequency Response: 30Hz to 16kHz (Cr02 tape) Signal to Noise Ratio: 58dB (dolby B) Wow and Flutter: 0.07% Input: 100mV (line), 0.25mV (mic) Output: 0.3V (line) Dimensions: 450 x 260 x 120mm Weight: 7.5kg

The Box PA 302 A Active 2 Way Full Range Loudspeakers in

The Box PA 302 A (2-off) Active 2 Way Full Range Loudspeakers New at Thomann Germany ¬ 255.- each Equipped with: 12" woofer and VCD horn 55 x with 44 mm Thomann Titanium driver Bi-Amp Power: 300 W woofer + 100 W tweeter Frequency range: 50 Hz - 18kHz / -3 dB Switchable 120 Hz Low Cut Microphone/Line XLR input with 2-Band EQ XLR Output 3x Flytracks with M8 thread on top Dimensions(H x W x D): 600 x 415 x 390 mm Weight approx. 23 kg

Vintage Goodmans Goodwood 3-way Classic British Loudspeakers

Vintage Goodmans Goodwood 3-way Classic British Loudspeakers. Great sounding speakers. Been part of my collection, that I am thinning out, for some time. All original drivers in full working order. Good, clean condition, general minor signs of wear as expected for their age. The bass unit of the Goodmans Goodwood speaker consists of a rigid die-cast frame carrying a massive ceramic magnet. The composite diaphragm uses a heavy fibrous cone with high internal damping, the front surface being finished with a plastic coating which also forms the roll surround. The mid-range unit is a small version of the bass unit and uses a 3-inch composite diaphragm of plastic polymer and fibre. The diaphragm is mounted on a rigid die-cast frame which also carries an unusually large ceramic magnet. The dome high frequency radiator (DT3) has a diaphragm moulded from synthetic fabric frontally finished with a homogeneous plastic coating. The dome is mounted at the rear of a short, moulded plastic exponential horn which ensures a wide dispersion angle, correctly loads the diaphragm and improves the overall linearity beyond the highest audible frequencies. In this unit, the diaphragm and magnet system are mounted on a plastic moulding and the rear is completely sealed. Inside the Goodmans Goodwood's cabinet, a synthetic gasket is placed between each drive unit and the front panel to ensure that the whole cabinet is completely sealed. Specifications: Drivers: - 1 x 30.5cm bass driver, 1 x 10.2cm mid-range unit, 1 x 2.5cm dome tweeter HC: - 50 watts (DIN) Frequency Response: - 40Hz to Hz Crossover: - 800Hz, 4kHz Peak Power: - 60 watts into 4 ohms Impedance: - 4 to 8 ohms Dimensions (w x d x h): - 36 x 27.5 x 76 cm Weight: - 18kg each Happy to demonstrate

Vintage Goodmans Goodwood 3-way Classic British Loudspeakers

Vintage Goodmans Goodwood 3-way Classic British Loudspeakers. Great sounding speakers. Been part of my collection, that I am thinning out, for some time. All original drivers in full working order. Good, clean condition, general minor signs of wear as expected for their age. The bass unit of the Goodmans Goodwood speaker consists of a rigid die-cast frame carrying a massive ceramic magnet. The composite diaphragm uses a heavy fibrous cone with high internal damping, the front surface being finished with a plastic coating which also forms the roll surround. The mid-range unit is a small version of the bass unit and uses a 3-inch composite diaphragm of plastic polymer and fibre. The diaphragm is mounted on a rigid die-cast frame which also carries an unusually large ceramic magnet. The dome high frequency radiator (DT3) has a diaphragm moulded from synthetic fabric frontally finished with a homogeneous plastic coating. The dome is mounted at the rear of a short, moulded plastic exponential horn which ensures a wide dispersion angle, correctly loads the diaphragm and improves the overall linearity beyond the highest audible frequencies. In this unit, the diaphragm and magnet system are mounted on a plastic moulding and the rear is completely sealed. Inside the Goodmans Goodwood's cabinet, a synthetic gasket is placed between each drive unit and the front panel to ensure that the whole cabinet is completely sealed. Specifications: Drivers: - 1 x 30.5cm bass driver, 1 x 10.2cm mid-range unit, 1 x 2.5cm dome tweeter HC: - 50 watts (DIN) Frequency Response: - 40Hz to Hz Crossover: - 800Hz, 4kHz Peak Power: - 60 watts into 4 ohms Impedance: - 4 to 8 ohms Dimensions (w x d x h): - 36 x 27.5 x 76 cm Weight: - 18kg each Happy to demonstrate Read More

Pioneer PL-12D Turntable, FWO, VGC, Shure M75ED Type 2

Pioneer PL-12D Turntable in FWO, VGC with Shure M75ED Type 2 cartridge and Shure N75ED-T2 stylus. Great sounding and easy to use belt driven turntable. Plenty of tight controlled bass. Suspension spring damping foam replaced. Specifications: Motor: 4-pole synchronous motor Drive: belt driven Speeds: 33 and 45rpm Speed accuracy: 1.0% or less Wow and flutter: 0.1% WRMS Rumble: 47dB Platter: 30cm aluminium alloy Tonearm: s-shaped pipe Effective length: 221mm Dimensions: 430 x x 349mm Weight: 7.5kg Happy to demonstrate Read More

Pair Q Acoustics Bookshelf Speakers. FWO. Graphite

Pair Q Acoustics Bookshelf Speakers. FWO. Graphite finish. Good condition. 75W. 6 ohms. Great sound.

Sony TC-200 Vintage Reel-to-Reel c/w Speakers – VGC, FWO

Sony TC-200 Vintage Reel-to-Reel c/w Speakers – VGC, FWO Compact 7" R2R with separate speakers that form a small portable 'suitcase' when in the closed position. First manufactured in . Refer to YouTube that has numerous videos demonstrating the unit. Specifications: Track system: 4-track, 2-channel, stereo/monaural system Reel size: up to 7 inch reel Tape speeds: ips Wow and flutter: ips) Frequency response: 50Hz to 14kHz (7 1/2 ips) Signal to Noise Ratio: 46dB Output power: 1.5 watts Semiconductors: 2 x 2SD64, 2 x 1T22G, 1 x 1S125 Valve complement: 2 x x 30M-P23 Dimensions: 404 x 380 x 227mm Weight: 12kg Year: Read More

Mission 731 Bookshelf Loudspeakers

A pair of mission 731 bookshelf loudspeakers, Drive units are in great condition,theres obvious wear and tear to the cabinets, which would definitely benefit from a good clean and some minor repair work, I don't have the covers, grilles, for these, no idea what happened to them, but to be fair they should be used without the grilles in place and they do look far better with no grilles on them. Originally I used these as the rear surrounds in a 5.1 set up, then when I obtained a pair of omnidirectional rear surrounds I employed the missions in a pair, as a centre speaker, which performed admirably for many years, they've never been abused or pushed unreasonably etc. Am now looking at a b&w centre speaker to replace the 'physically large' pair of missions, as seen in photos, Am always open to sensible offers, cheers, thanks. Read More

Yamaha DSP-A - Receiver in FWO, VGC, Box – Phono Stage

Yamaha DSP-A - Receiver in FWO, VGC, Box, Manual, Remote – Phono Stage I have been using this audiophile quality heavyweight performer as a 2-Channel music amp for a number of years. These units sold for £ in and used the highest quality components (Nichicon etc.) and engineering know how. At over 20kg the build quality is of the highest standard. These are very musical amps with an abundance of power that can drive the most demanding of speakers. The phono stage is an impressive solid performer. Specifications: Power Output: 80 watts per channel into 8? (stereo) Surround Output: 80W (front), 80W (center), 25W (rear) Frequency Response: 20Hz to 20kHz Total Harmonic Distortion: % Input Sensitivity: 2.5mV (MM), 150mV (line) Signal to Noise Ratio: 96dB (line) Output: 150mV (line) Speaker Load Impedance: 4? to 16? Video Connections: composite, SVHS Dimensions: 435 x 170 x mm Weight: 21kg Accessories: remote control Happy to demonstrate Read More

Maxi Cosi 2 way Pearl car seat and 2 way fix base in

As described in title, from approx. 6 months to 4 years. Guarantee has not been in any accident. Fitted into grandparents vehicle so had very little use. Complete with instructions and vehicle compatibility. Feel free to come and inspect without obligation.

TV Aerial Loft Kit, 2 way, 3 way, 4 way, 6 way, 8 way Splitter Distribution

Aerial Kit from £36 TV loft aerial kit includes: - Wolsey QR12 WF Aerial (12db Gain) Lte protected - Triax splitter - F Connectors - Aerial bracket - 5 meters CAI approved coaxial cable 2 Way TV splitter distribution: Suitable for two TV points. 3 Way TV splitter distribution: Suitable for three TV points. 4 Way TV splitter distribution: Suitable for four TV points. 6 Way TV splitter distributions: Suitable for six TV points. 8 Way TV splitter distributions: Suitable for eight TV points. *6/8 way system require a good signal aerial. All equipment is new and approved. Prices 2 way system £36 3 way system £38 4 way system £40 6 way system £42 8 way system £44 Postage available with an additional fee! Ad ID: Delivery Service Consumer Credit

Black, JBL Control One 2-Way Bookshelf Audio Monito

Brand New, NEVER Used Black, JBL Control One 2-Way (4 Inch) Bookshelf Audio Monitor Speakers. Great for Studio mixing as they give a pretty accurate translation of music in the high and mid tones. Complete in original box, absolutely as bought as new in Maplins. (I purchased two pairs of JBLs - a black & a white pair and decided the white pair better suited my room decor hence the sale of the black pair etc) Read More

Great sounding KEF R100 Hifi bookshelf loudspeakers

2 x Kef R100 hifi bookshelf loudspeakers in Walnut finish. Approximately 18 months old. Excellent, detailed sound. Can be easily bi-wired, or used with a 2-wire set up. Great for use as part of a good hifi or in an AV set up with a sub-woofer and/or another 2 of the same speaker. Looks really stylish with the Removable speaker front covers taken off (Attached magnetically) Great sound from small speakers. CONDITION: Sonically excellent; a few small marks on the edges of the one speaker (back left at the top, front right vertical edge and top, front right edge. - photos can be supplied Only 3 photos allowed so main photos only initially. If you're looking to set up your first quality hifi, this is a good pair of speakers to start with. Specification: DESIGN Two-way bass reflex DRIVE UNITS Uni-Q driver array: HF: 25mm (1in.) vented aluminium dome LF/MF: 130mm (5.25in.) aluminium FREQUENCY RANGE 49Hz - 45kHz (-6dB) FREQUENCY RESPONSE 56Hz - 28kHz (±3dB) CROSSOVER FREQUENCIES 2.5kHz MAXIMUM OUTPUT 107dB AMPLIFIER REQUIREMENTS W SENSITIVITY 86dB (2.83v/1m) HARMONIC DISTORTION NOMINAL IMPEDANCE 8 Ohms (min.3.2 Ohms) DIMENSIONS 280 x 180 x 289 mm (11 x 7.1 x 11.4 in.) with grille and terminal WEIGHT 6.6kg (14.5lbs) UNIT MEASUREMENT Pair Buyer collects. Not included in the price, but matching the speakers are the strands I've been using with them. I also have and advert for some excellent 600mm tall Atacama Mosecco speaker stands also on this site for sale under under Music and Hifi... I might be prepared to move on price for anybody buying both items. Read More

Mission 760i 2-Way Reflex Bookshelf Speakers - Hi-Fi Stereo

Pair of Mission 760i bookshelf speakers in black. 2-way reflex, w/ch, 6ohms. Made in England. Dimensions: H 30cm, W 18cm, D 20cm. Please phone or email to take a look (sorry, I cannot reply to texts). Collection from Southsea.

MISSION 73 Series 731i BLACK 2 WAY bookshelf Speakers New

MISSION 73 Series 731i BLACK 2 WAY bookshelf Speakers NEW Boxed Read More

High Quality bargain KEF R100 Hifi bookshelf loudspeakers

2 x Kef R100 hifi bookshelf loudspeakers in Walnut finish. Approximately 18 months old. Excellent, detailed sound. Can be easily bi-wired, or used with a 2-wire set up. Great for use as part of a good hifi or in an AV set up with a sub-woofer and/or another 2 of the same speaker. Removable speaker front covers. (Attached magnetically) Great sound from small speakers. CONDITION: Sonically excellent; a few small marks on the edges of the one speaker (back left at the top, front right vertical edge and top, front right edge. - photos can be supplied Only 3 photos allowed so main photos only initially. Specification: DESIGN Two-way bass reflex DRIVE UNITS Uni-Q driver array: HF: 25mm (1in.) vented aluminium dome LF/MF: 130mm (5.25in.) aluminium FREQUENCY RANGE 49Hz - 45kHz (-6dB) FREQUENCY RESPONSE 56Hz - 28kHz (±3dB) CROSSOVER FREQUENCIES 2.5kHz MAXIMUM OUTPUT 107dB AMPLIFIER REQUIREMENTS W SENSITIVITY 86dB (2.83v/1m) HARMONIC DISTORTION NOMINAL IMPEDANCE 8 Ohms (min.3.2 Ohms) DIMENSIONS 280 x 180 x 289 mm (11 x 7.1 x 11.4 in.) with grille and terminal WEIGHT 6.6kg (14.5lbs) UNIT MEASUREMENT Pair Buyer collects. No time wasters, please. Please note below, not included in the price, but matching the sepakers If you need suitable speaker stands for these (recommended) I also have and advert for some excellent 600mm tall Atacama Mosecco speaker stands also on this site for sale under under Music and Hifi... and should you need some, 2 lengths of pre-terminated (banana plugs) QED XT40 hi quality speaker cable, also being advertised separately in the same section. The three together make an brilliant combination for somebody wanting to set up a really good hi-fi. I might be prepared to move on price for anybody buying all three items. Read More

High Quality bargain KEF R100 Hifi bookshelf loudspeakers

2 x Kef R100 hifi bookshelf loudspeakers in Walnut finish. Approximately 18 months old. Excellent, detailed sound. Can be easily bi-wired, or used with a 2-wire set up. Great for use as part of a good hifi or in an AV set up with a sub-woofer and/or another 2 of the same speaker. Removable speaker front covers. Great sound from small speakers. CONDITION: Sonically excellent; 3 small marks on the edges of the one speaker (back left at the top, front right vertical edge and top, front right edge. - photos can be supplied Only 3 photos allowed so main photos only initially. Specification: DESIGN Two-way bass reflex DRIVE UNITS Uni-Q driver array: HF: 25mm (1in.) vented aluminium dome LF/MF: 130mm (5.25in.) aluminium FREQUENCY RANGE 49Hz - 45kHz (-6dB) FREQUENCY RESPONSE 56Hz - 28kHz (±3dB) CROSSOVER FREQUENCIES 2.5kHz MAXIMUM OUTPUT 107dB AMPLIFIER REQUIREMENTS W SENSITIVITY 86dB (2.83v/1m) HARMONIC DISTORTION NOMINAL IMPEDANCE 8 Ohms (min.3.2 Ohms) DIMENSIONS 280 x 180 x 289 mm (11 x 7.1 x 11.4 in.) with grille and terminal WEIGHT 6.6kg (14.5lbs) UNIT MEASUREMENT Pair Buyer collects. No time wasters, please. Please note below, not included in the price, but matching the sepakers If you need suitable speaker stands for these (recommended) I also have and advert for some excellent 600mm tall Atacama Mosecco speaker stands also on this site for sale under under Music and Hifi... and should you need some, 2 lengths of pre-terminated (banana plugs) QED XT40 hi quality speaker cable, also being advertised separately in the same section. The three together make an brilliant combination for somebody wanting to set up a really good hi-fi. I might be prepared to move on price for anybody buying all three items. Read More

Denon DRA-F100 Receiver and DCD-F100 CDP, VGC, FWO

Denon DRA-F100 Receiver and DCD-F100 CD Player - VGC and FWO Denon DRA-F100 - AM/FM Stereo Receiver Specifications: Tuning range: FM, MW Power output: 30 watts per channel into 4? (stereo) Dimensions: 270 x 84 x 289mm Weight: 4.1kg Denon DCD-F100 - Compact Disc Player Specifications: Disc format: CD Frequency response: 20Hz to 20kHz Dimensions: 270 x 84 x 264mm Weight: 2.7kg Great sounding, highly regarded, compact (midi) system. Happy to demonstrate Read More

Denon DRA-F100 Receiver and DCD-F100 CD Player - VGC, FWO

Denon DRA-F100 Receiver and DCD-F100 CD Player - VGC and FWO Denon DRA-F100 - AM/FM Stereo Receiver Specifications: Tuning range: FM, MW Power output: 30 watts per channel into 4Ω (stereo) Dimensions: 270 x 84 x 289mm Weight: 4.1kg Denon DCD-F100 - Compact Disc Player Specifications: Disc format: CD Frequency response: 20Hz to 20kHz Dimensions: 270 x 84 x 264mm Weight: 2.7kg Great sounding, highly regarded, compact (midi) system. Happy to demonstrate

Contact

• Next →