bearing pullers

Bearing pullers

Bearing pullers x 2 1 large 1 medium good condition. Looking for £30 for the pair ono

Bearing pullers and g and welding clamps

Bearing pullers and g and welding clamps Read More

Bronze Cutless Bearing Housing for 25mm diam Bearing & Shaft, also Inboard Bearing Housing Available

This is a used cutless bearing housing to take a 25mm diameter bearing and propellor-shaft. It is made of cast bronze, and takes a 50mm long bearing, which was rather short for our 1 metre long prop shaft, so we have changed to a 100mm long housing and bearing, which cost over £200. It will be fine for a short prop shaft, or a situation where there is not enough room for a longer bearing housing such as inside a rudder aperture on a long-keeler. The inboard end of the casting is threaded for attaching to the stern tube, and the threads are 16 TPinch, or 6TPcm, and inch diameter on a 1.5 inch diameter tube. The two anti-twist bolt holes are at 4.3 inch, 110mm, centres. A suitable new section of bearing is available at no extra charge. Asking £65 ono I also have available the bearing housing from the inboard end of the same stern tube, with the same thread. Would sell sperately for £60 ono, or together for £110 ono. Buyer collects or I could post it at cost. Ad ID: Delivery Services Consumer Credit

Bronze Cutless Bearing Housing for 25mm diam Bearing & Shaft, also Inboard Bearing Housing Available

This is a used cutless bearing housing to take a 25mm diameter bearing and propellor-shaft. It is made of cast bronze, and takes a 50mm long bearing, which was rather short for our 1 metre long prop shaft, so we have changed to a 100mm long housing and bearing, which cost over £200. It will be fine for a short prop shaft, or a situation where there is not enough room for a longer bearing housing such as inside a rudder aperture on a long-keeler. The inboard end of the casting is threaded for attaching to the stern tube, and the threads are 16 TPinch, or 6TPcm, and inch diameter on a 1.5 inch diameter tube. The two anti-twist bolt holes are at 4.3 inch, 110mm, centres. A suitable new section of bearing is available at no extra charge. Asking £65 ono I also have available the bearing housing from the inboard end of the same stern tube, with the same thread. Would sell sperately for £65 ono, or together for £120 ono. Buyer collects or I could post it at cost. Ad ID: Delivery Services Consumer Credit

Bronze Cutless Bearing Housing for 25mm diam Bearing & Shaft, also Inboard Bearing Housing Available

This is a used cutless bearing housing to take a 25mm diameter bearing and propellor-shaft. It is made of cast bronze, and takes a 50mm long bearing, which was rather short for our 1 metre long prop shaft, so we have changed to a 100mm long housing and bearing, which cost over £200. As it is the removable bearing that takes all the wear, it is is fine condition. It will be suitable for a short prop shaft, or a situation where there is not enough room for a longer bearing housing such as inside a rudder aperture on a long-keeler. The inboard end of the casting is threaded for attaching to the stern tube, and the threads are 16 TPinch, or 6 TPcm, and inch diameter on a 1.5 inch diameter tube. The two anti-twist bolt holes are at 4.3 inch, 110mm, centres. A suitable new section of bearing is available at no extra charge. Asking £65 ono I also have available the bearing housing from the inboard end of the same stern tube, with the same thread. Would sell sperately for £65 ono, or together for £120 ono. Buyer collects or I could post it at cost. Ad ID: Delivery Service Consumer Credit

Bronze Cutless Bearing Housing for 25mm diam Bearing & Shaft

This is a used cutless bearing housing to take a 25mm diameter bearing and propellor-shaft. It is made of cast bronze, and takes a 50mm long bearing, which was rather short for our 1 metre long prop shaft, so we have changed to a 100mm long housing and bearing. It will be fine for a short prop shaft, or a situation where there is not enough room for a longer bearing housing such as inside a rudder aperture on a long-keeler. The inboard end of the casting is threaded for attaching to the stern tube, and the threads are 16 TPinch, or 6TPcm, and inch diameter on a 1.5 inch diameter tube. The two anti-twist bolt holes are at 4.3 inch, 110mm, centres. A suitable new section of bearing is available at no extra charge. Asking £65 ono Buyer collects or I could post it at cost. Read More

Bronze Cutless Bearing Housing for 25mm diam Bearing & Shaft

This is a used cutless bearing housing to take a 25mm diameter bearing and propellor-shaft. It is made of cast bronze, and takes a 50mm long bearing, which was rather short for our 1 metre long prop shaft, so we have changed to a 100mm long housing and bearing. It will be fine for a short prop shaft, or a situation where there is not enough room for a longer bearing housing such as inside a rudder aperture on a long-keeler. (The brass tube from the old bearing is still in situ.) The inboard end of the casting is threaded for attaching to the stern tube, and the threads are 16 TPinch, or 6TPcm, and inch diameter on a 1.5 inch diameter tube. The two anti-twist bolt holes are at 4.3 inch, 110mm, centres. A suitable new section of bearing is available at no extra charge. (The new 100 mm housing cost nearly £200!) Asking £65 ono Buyer collects or I could post it at cost.

Bronze Cutless Bearing Housing for 25mm diam Bearing & Shaft

This is a used cutless bearing housing to take a 25mm diameter bearing and propellor-shaft. It is made of cast bronze, and takes a 50mm long bearing, which was rather short for our 1 metre long prop shaft, so we have changed to a 100mm long housing and bearing. It will be fine for a short prop shaft, or a situation where there is not enough room for a longer bearing housing such as inside a rudder aperture on a long-keeler. The inboard end of the casting is threaded for attaching to the stern tube, and the threads are 16 TPinch, or 6TPcm, and inch diameter on a 1.5 inch diameter tube. The two anti-twist bolt holes are at 4.3 inch, 110mm, centres. A suitable new section of bearing is available at no extra charge. Asking £65 ono Buyer collects or I could post it at cost.

Sealed High Speed Bearing Snowblower Bearing For Ariens &

Quantity: Change country: -Select- Australia Austria Bahrain Belgium Brazil Bulgaria Canada Chile Colombia Costa Rica Croatia, Republic of Cyprus Czech Republic Denmark Dominican Republic El Salvador Estonia Finland France Germany Greece Guatemala Honduras Hong Kong Hungary Indonesia Ireland Israel Italy Jamaica Japan Korea, South Kuwait Latvia Lithuania Malaysia Malta Mexico Netherlands New Zealand Norway Panama Philippines Poland Portugal Qatar Romania Russian Federation Saudi Arabia Singapore Slovakia Slovenia South Africa Spain Sweden Switzerland Taiwan Trinidad and Tobago Ukraine United Arab Emirates United Kingdom United States There are 55 items available. Please enter a number less than or equal to 55. Select a valid country. Postcode: Please enter a valid postcode. Please enter up to 7 characters for the postcode

Zipper Pullers

Make zips easier to grip... and add some style! Pack of 3 beautiful zip pullers ideal for coats, hoodies, bags or anything which features a zip! Simply clip onto a zip. Pack Includes: 1 x faux pearl colour, 1 x grey faux pearl colour, 1 x diamante. Each measures diam 1.3cm. Ad ID: Delivery Service Consumer Credit

sykes picavant pullers

mechanical twin / triple leg multi. puller kit, good condition, not had much use. price includes UK postage, or collect. Read More

Nissan 300ZX Bearing Race Timken Nissan Bearing

SKU: TM, TIMKEN TRANSFER CASE OUTPUT SHAFT BEARING CONE, SOLD INDIVIDUALLY -- This is a high quality, OE replacement transfer case output shaft bearing cone.. Auto Parts Warehouse has extensive Timken Bearing Race catalogs.We are now offering FREE shipping on all Timken Bearing Race orders over $. Our secure timken bearing race catalog is available every hour of everyday. Shop with confidence for all your timken bearing race needs. Timken Bearing Race are In Stock and available today. Save up to 60% off dealer price on your next Timken Bearing Race purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices Buy Now

Set 3 Zipper Pullers

Makes zips easier to grip.....and adds some style! Pack of 3 beautiful zip pullers ideal for coats, bags, hoodies, anything which features a zip. Simply clip onto a zip. Pack includes 1 faux pearl colour, 1 faux grey pearl colour and 1 diamante. Each measure Diam. 1.3cm Really sets off a Cardigan or Jacket. Helpful for elderly or infirm. Remove before washing item.

Set 3 Zipper Pullers

Makes zips easier to grip.....and adds some style! Pack of 3 beautiful zip pullers ideal for coats, bags, hoodies, anything which features a zip. Simply clip onto a zip. Pack includes 1 faux pearl colour, 1 faux grey pearl colour and 1 diamante. Each measure Diam. 1.3cm Really sets off a Cardigan or Jacket. Helpful for elderly or infirm. Remove before washing item.

Chickens/hens pullers POL

For sale... 280 warren/battery hens weeks old Most of them have been vaccinated £5 each. Minimum order 4 Any questions please ask I'm only available Sundays Ad ID:

Details about   Antique Boot Pullers

Old antique boot pullers with a bit of rust here and there, handles are in good condition, made in England  

ARCHERY QUIVER AND ARROW PULLERS

CARTEL QUIVER WITH BELT + ARROW PULLER SEEN LITTLE USE SO IN GOOD CONDITION Read more

Details about   Pair of boot pullers

These were very handy when l was riding, recently given up. Hope someone can make use of them.

45 new peg pullers free local delivery

45 brand new tent peg extractors All still in original packaging £10 for the lot Ad ID: Delivery Service Consumer Credit

Fishing bits hooks swivels knot pullers pellet bands

Fishing bits and bobs As a job lot or sell as single items Starting from 50p each Please message me on if interested thanks Ad ID: Delivery Service Consumer Credit

Details about   Pair of Beech & Steel Boot Pullers.

Pair of Beech & Steel Boot Pullers. in Sporting Goods, Equestrian, Horse Wear & Equipment

Details about   Farrier tools Horse Nail Pullers 12"

Farrier tools Horse Nail Pullers  12"

2 x pole top kits with side pullers

Long power top kits with side pullers. 19mm £15 for the pair. Collection Lincoln Ad ID: Delivery Service Consumer Credit

shimano technium 13mtr pole 3 top 2s elasticated 2 with pullers, little used.

shimano technium 13mtr pole three tops elasticated 2with pullers little used.pole cup included. Ad ID:

BMW 328i Wheel Bearing SKF BMW Wheel Bearing

SKU: W-, SKF SKF is an OE manufacturer and a leading supplier of high quality bearings and components for automotive applications.. Auto Parts Warehouse has extensive SKF Wheel Bearing catalogs.We are now offering FREE shipping on all SKF Wheel Bearing orders over $. Our secure skf wheel bearing catalog is available every hour of everyday. Shop with confidence for all your skf wheel bearing needs. SKF Wheel Bearing are In Stock and available today. Save up to 60% off dealer price on your next SKF Wheel Bearing purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices Buy Now

Contact

• Next →