Chasecam PDR PDR100-G Force And
This is my camera which was used on about 20 rallies. It's just been back to the USA for a new circuit board and full service so it's now almost brand new and hasn't been used since as the car was sold while it was away. Only selling as I don't have a car to put it in Bought for £ originally The recorder has an internal mic and can also plug into a Peltor intercom and the two audio sources mixed together. It can also show acceleration/deceleration and left/right G forces This recorder is for wiring into the car and does not require batteries. To see it in action: http://youtu.be/xpMnIuzdDQo Included is: PDR100 recorder. A securing base to mount the recorder in the car. Roll cage mount. Two extension arms Bullet camera Remote lance to turn it on Extension cable between the camera and recorder Cabling to wire into the car electrics. Technical info: The PDR100 is a rugged solid state video and data recorder. It records a single stream of standard definition video, and can also record various data in sync with the video. Video is recorded as MPEG2 onto Compact Flash cards. Features List Rugged. Tested to 97G impact by NASA Anodized aluminum case. Rubber bumpers for internal board shock isolation. Media door for Compact Flash User keypad and LCD menu text display Wide power band. Provides regulated and filtered 12V power to external camera Locking power connector (as well as DC Jack) Internal SuperCap (battery) back up to preserve files on power drop or loss Automatic boot up on power (user set) Records to Compact Flash Cards (up to 32gig) Time and Date Stamp (user set, can be turned off) Gforce Overlays (user set, can be turned off). Friction bar graphs and/or text. RS-232 input. Command control / status output via RS-232 RS-232 data stream input Can continuous record (recycle recording) User set file sizes to 4gig Hands free recording or single button LAN-C remote or custom remote Internal microphone, user set sensitivity Accepts external microphone (user adjustable sensitivity) Accepts external audio (user adjustable sensitivity) Can do audio mixing… left channel external audio, right channel microphone (internal or external) Each audio channel independently adjustable User set video size. User set compression levels. Smaller size and lower compression can extend recording times past 100 hours. AV Output jack for external monitor or playback Able to set custom file names (first two digits) to differentiate recorders Technical Power: 9-28VDC Input, 750ma max with camera PAL or NTSC video Interlaced (480i) NTSC @ 30fps. PAL @ 25fps. Max 6mbs rate. Users 300X or faster CF cards Weight: 14 ounces Size: 4″ deep. 1.82″ high. 5″ wide. Power via DC Jack or 2 position Phoenix screw attached terminal block Camera interface uses ChaseCam MiniDIN (4 pin) standard AVOUT is 3.5mm 4 contact jack MIC and AUDIO IN are 3.5mm Stereo jacks LAN-C is 2.5mm jack RS-232 and remote interface via 8 pni RJ-45 connector CF Card connector standard Power supply auto-power switch located inside of front door (red switch) LED Indicator (On, Paused, Recording, Trigger Ready, MENU, error) LCD status: CF Card capacity. Sound levels. Trigger on/off. Date/Time. Firmware version. Video Ready. CF Ready. Error messages. Video data.