abs 3d printing filament in black and white 1kg spools of ea

ABS 3D PRINTING FILAMENT IN BLACK AND WHITE 1KG SPOOLS of ea

ABS 3D PRINTING FILAMENT IN BLACK AND WHITE 1KG SPOOLS of each 1.75mm Spools of ABS in Black and White 1.75mm both bought from 3DFilaPrint The Black has been opened but never used, white has approximately 3 meters which has been used. Selling due to too many filaments filling the room. Read more

Black 3D printing filament

Velleman 3 mm Black 3D printing filament 1 kg in weight. Ad ID: Delivery Service Consumer Credit

Wanhao Duplicator I3 3D printer + 1kg of back pla filament (Unused)

Wanhao duplicator I3 3D printer, never used, have not even been fully assembled. All parts and tools are included (most of them unpacked) + 1kg of black pla filament I had got. Please email me or give me a text. Ad ID: Delivery Service Consumer Credit

3D Print Filament PLA/ABS 1.75mm/3mm for 3D Printer Material

Please specify the type and the color when you're emailing/text me on . 3D Printer Filament, PLA, 1.75mm/3.00mm, -1kg/Spool 1.0kg/spool (net weight) PLA Filament -PLA Filament: 1.75mm±0.05; -Printable at celsius (ideal temperature); -Color: Black/ White/ Clear red/ Fluo green/ Baby blue/ Dark grey/ Golden/ Transparent/ Violet/ Dark Blue/ Orange/ Pink/ Yellow; 1.0kg/spool (net weight) PLA Filament -PLA Filament: 3.00mm±0.1; -Printable at Celsius (ideal temperature); -Color: Black/White/Fluo Green/Baby Blue; 1.0kg/spool (net weight) ABS Filament ----------- -ABS Filament: 1.75mm±0.05; -Printable at celsius (ideal temperature); -Color: Black/White/Clear red/Fluo green/Baby blue/Orange/Pink 1.0kg/spool (net weight) ABS Filament -ABS Filament: 3.00mm±0.1; -Printable at celsius (ideal temperature); -Color: Black/White/Fluo Green; Local collection is available for LEICESTER area only. Please book an appointment in advanced.

3D Printer Filament Spools

4 x Black ABS 1.75mm diameter. 750g - 3 x spools brand new unopened. + 1 opened with only 1 meter used of approximately 90 metres.

3D Printing Pen + Filament

3D Printing Pen with 10 different colours of Filament

1.75mm Abs Filament for 3D printers

100m reels of green, grey, blue and yellow available, plenty of each. £3 per reel. Ad ID: Delivery Service Consumer Credit

Brand New Anet A8 3D printer with black and white filament

Brand New Anet A8 3D printer with 2 brand new rolls of PLA filament (black and white) bought as a gift but is unwanted. Ad ID: Delivery Service Consumer Credit

Cubepro ABS White filament

ABS filament, white, about 70% remaining, worth over £110!

PLA & ABS 3D Pirinter Filaments 1.75mm ikg Spools

PLA & ABS 3D Printer Filaments 1.75mm 1kg Spools Availble Colours Black White (limited ABS) Blue Green Yellow Purple (limited PLA) Pink Orange Grey £10 each + £4.70 Postage / Free Collection / Local delivery.

PLA 1.75mm 9 x Rolls - Plastic Filament for 3D Printing

1 KG (approximately 2.20 lbs) Spools assorted colours - 2 x black, 2 x red, 1 x green, 1x yellow, 1 x light blue, 1 x silver, 1 x clear 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) PLA (Polylactic Acid) 3D Printer Filament Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F) Some of the rolls were used on a 3D Printer - selling altogether as a job lot Read More

NEW Premium 3D Printer ABS filament 1.75mm& 2.85mm- 1 kg

NEW Premium 3D Printer ABS filament 1.75mm& 2.85mm- 1 kg - available in different colours with free delivery

Black and White Printing Book - Dixons World of Photography

Black and White Printing book for sale, used Publisher: Eaglemoss, London Publication Date: Binding: Hardcover Ad ID: Delivery Service Consumer Credit

ColorFabb White PLA/PHA 3D Printer Filament

Condition: New,In Stock Excl. Tax: £ Incl. Tax: £ *** Delivery is FREE! *** 3D printing filament. Versatile like PLA but tough like PHA, designed to be less brittle while remaining biodegradable. Improved adhesion between printed layers. Diameter: 3.00mm. Colour: White. Supplied on a 750g spool. Non returnable. Looking to your quick response. Thanks.

Berkley Nanofil metre spools Uni Clear Mist Filament

Berkley Nanofil metre spools Uni Filament Line Is it mono or is it braid? What ever it is it is brilliant!! Great for casting, strength and resistant is unbelievable!! COLOUR: Clear Mist Available in:B/Strain:  kg,kg, kg, kg, kg, kg, kgDIAMETER:  0.12mm, 0.15MM, 0.17MM, 0.20MM, 0.22MM, 0.25MM, 0.28MM FEATURES: Minimum diameter but with superior strength ●Direct contact to lures and bait ●Immediate hook sets & no stretch ●% further casting ability with no more effort ●Many applications from spinning or match fishing to trotting or feeder fishing ●The ultimate bass, trout, sea trout spinning braid The development of seven years research and formulation in the making! Berkley have partnered with the legendary DSM facility to bring a new formulation of fishing line, it’s not mono, it’s not braid and it’s not fluorocarbon, Berkley engineers have named Nano in it’s own category “Uni-Filament”. Nano is fused using a heat process that binds over 300 fibres together – most manufactures would use glue – however with Berkley ’s patented process these fi bres will not come apart like most others. To sum up the science, Nano casts further with less effort; lures will run deeper because Nano is so thin that there is no resistance or drag hindering the sink rate. Its smooth outer means that it is highly abrasion-resistance and the recommend knot for ultimate strength, is the double Palomar! And for joining to fluoro or mono leaders Berkley recommend the Albright double. In amongst all the science, this line has just picked up the EFFTEX award for best new product innovation. Praise indeed!  

3D printer, parts and filament want

After a used workinging order 3d printer. Looking to spend £. Dont offer me things I can buy new, Id buy new if I wanted to pay new. After kg rolls of filament and carbon filament. I need corner pieces like the picture in steel aswell as other plates. Some graft there for some one. Im in Hull if you are close and can drop off or must be willing to post. Motors and parts. Email me what you got as I need reprap drivers ect. I need a few things a bunch of motors are priority. Will buy used hole dual extruder 3d printer or anything thats under half price of new. These aint houses. Thanks. Diy filament maker or a plastic recycler that will dobit. Il go 50 on that too.. Got few 100 for right deals. Need bits too. Pcb ect. bars wanted at right price too. Packs. Ad ID: Delivery Service Consumer Credit

3D printer filament - FormFutura CarbonFil 1.75 Black - 500g reels

FormFutura CarbonFil 1.75 Black - 500g reel. Carbon-fibre infused PETG. Full specs can be found looking for CarbonFil on the FormFutura website. I'm offering reels of CarbonFil which are now surplus to requirements. All reels unopened and factory-sealed. As with regular PETG, CarbonFil gives far stronger inter-layer adhesion than you get with PLA or ABS and shows little or no warp, but the addition of the carbon fibres gives very high stiffness and a matte finish. I had purchased a large batch of reels for a specific job involving large print runs of small parts and had difficultly dialing settings consistently across multiple printers. Individually-tuned prints of single parts were fine. I'm keeping a few reels for future use, but have no plans to use the rest, hence selling them on. I'm happy to answer any questions (although unable to give much detail on the exact printer settings required to achieve optimal printing). Hardened nozzles are recommended if you're planning to do lots of printing with this, as the carbon is known to be abrasive. Note that FormFutura do recommend 0.5mm nozzles or greater - see the product site for full recommended settings. At the £25 asking price (per reel) I'll post UK second class for free. Ad ID: Delivery Service Consumer Credit

Berkley Nanofil 125m spools Uni Lo Vis Green Filament Line

Berkley Nanofil 125 metre spools Uni Filament Line Is it mono or is it braid? What ever it is it is brilliant!! Great for casting, strength and resistant is unbelievable!! COLOUR: Lo Vis Green Available in:B/Strain: kg, kg,kg, kg, kg, kg, kg, kgDIAMETER: 0.10mm, 0.12mm, 0.15MM, 0.17MM, 0.20MM, 0.22MM, 0.25MM, 0.28MM ●Minimum diameter but with superior strength ●Direct contact to lures and bait ●Immediate hook sets & no stretch ●% further casting ability with no more effort ●Many applications from spinning or match fishing to trotting or feeder fishing ●The ultimate bass, trout, sea trout spinning braid The development of seven years research and formulation in the making! Berkley have partnered with the legendary DSM facility to bring a new formulation of fishing line, it’s not mono, it’s not braid and it’s not fluorocarbon, Berkley engineers have named Nano in it’s own category “Uni-Filament”. Nano is fused using a heat process that binds over 300 fibres together – most manufactures would use glue – however with Berkley ’s patented process these fi bres will not come apart like most others. To sum up the science, Nano casts further with less effort; lures will run deeper because Nano is so thin that there is no resistance or drag hindering the sink rate. Its smooth outer means that it is highly abrasion-resistance and the recommend knot for ultimate strength, is the double Palomar! And for joining to fluoro or mono leaders Berkley recommend the Albright double. In amongst all the science, this line has just picked up the EFFTEX award for best new product innovation. Praise indeed!

Berkley Nanofil 270m 300 yard spools Uni Lo Vis Red Filament

Berkley Nanofil 270 metre spools Uni Filament Line Is it mono or is it braid? What ever it is it is brilliant!! Great for casting, strength and resistant is unbelievable!! COLOUR: Lo Vis Red Available in:B/Strain: kg, kg,kg, kg, kg, kg, kg, kgDIAMETER: 0.10mm, 0.12mm, 0.15MM, 0.17MM, 0.20MM, 0.22MM, 0.25MM, 0.28MM FEATURES: Minimum diameter but with superior strength ●Direct contact to lures and bait ●Immediate hook sets & no stretch ●% further casting ability with no more effort ●Many applications from spinning or match fishing to trotting or feeder fishing ●The ultimate bass, trout, sea trout spinning braid The development of seven years research and formulation in the making! Berkley have partnered with the legendary DSM facility to bring a new formulation of fishing line, it’s not mono, it’s not braid and it’s not fluorocarbon, Berkley engineers have named Nano in it’s own category “Uni-Filament”. Nano is fused using a heat process that binds over 300 fibres together – most manufactures would use glue – however with Berkley ’s patented process these fi bres will not come apart like most others. To sum up the science, Nano casts further with less effort; lures will run deeper because Nano is so thin that there is no resistance or drag hindering the sink rate. Its smooth outer means that it is highly abrasion-resistance and the recommend knot for ultimate strength, is the double Palomar! And for joining to fluoro or mono leaders Berkley recommend the Albright double. In amongst all the science, this line has just picked up the EFFTEX award for best new product innovation. Praise indeed!

3D Prima 3D NinjaFlex Filament RRP £38

3D Prima 3D NinjaFlex Filament, 1.75 mm, 0.5 kg, Yellow Collection recommended or can be posted out. Cheers Read More

3D Prima 3D NinjaFlex Filament RRP £38

3D Prima 3D NinjaFlex Filament, 1.75 mm, 0.5 kg, Lava Collection recommended or can be posted out. Cheers Read More

3D Printer - Prusa i3 style - Fully assembled and fully working + 2 spools of PLA

Fully working 3D printer for sale with everything needed to get printing. Comes with two PLA spools (Red and Grey) which have a decent amount of plastic left. Blue tape included to help print adhesion. Any questions please feel free to contact me Ad ID: Delivery Service Consumer Credit

3D Printing Of Interest? Of Materials, Creating STL files

NEW 3D Discussion Users Group: Aims to freely discuss 3D printing problems, Building items, Users CNC building problems, or matters relating to all aspects of configuration plus using or upgrading 3D printers, including making best software usable, or obtaining cheaper consumables. Using materials like ABS, HIPS, Nylon, Polylacticacid PLA, various others etc. We are finding people are failing to complete or build units because there several different designs which it unclear, what fits with which! Read More

3d print service 3d printing 3d printed parts

Hi All, if you want to print prototype or just need 3d printed parts message me with your sul file. Ad ID: Delivery Service Consumer Credit

Da Vinci Mini W - USB & Wireless 3D Printer - Includes filament and tools - NEW!

Fantastic 3D Printer with quick and easy setup and usage for those who are new to 3D Printing and are looking to taste what 3D Printing is all about! Item is boxed as new, complete with all original accessories and tools. 15 x 15 x 15cm Build Volume 100 to 400 microns resolution Almost 1/3 smaller than da Vinci Jr. 1.0 USB 2.0, WiFi ( b/g/n) Technical Specification Technology: FFF (Fused Filament Fabrication) Product Dimension (WxDxH): 400 x 336 x 362 mm Package Dimension: 550x 390 x 470 mm Gross Weight: 10 kg Maximum Build Volume (WxDxH): 15x15x15cm Resolution: Fine 0.1 mm (100 microns), Standard 0.2 mm (200 microns), Speed 0.3 mm (300 microns), Ultra Fast 0.4 mm (400 microns) Print Head: Single Nozzle Nozzle Diameter: 0.4 mm Filament Diameter: 1.75 mm Filament Material: PLA Connectivity: USB 2.0, WiFi ( b/g/n) Software: XYZware File Types:.stl, XYZ Format (.3w), 3mf OS Support: Windows 7 and above (for PC) / Mac OSX 10.8 and above (for Mac) Hardware Requirements: X-bit compatible PCs with 4GB+ DRAM (for PC) / X-bit compatible Macs with 4GB+ DRAM (for Mac) Ad ID: Delivery Service Consumer Credit

Contact

• Next →