4u 19 abs flight rack mount case

4U 19" ABS Flight Rack Mount Case

4U 19" ABS Flight Rack Mount Equipment Case DJ PA Amp Read More

19" Rack ABS Flight Case 6U

Used but great condition 6U full depth Pulse ABS rack/ flight case. Comes with all the fittings, sad to be rid of it but we really just need a half-depth for our current set up. Willing to accept partial trade so don't be shy to make an offer. Ad ID: Delivery Service Consumer Credit

Dj Flight Case 4U 2 Door Rack "Short Version Flight Case for dj - disco - pa - amp- band

fits two amplifiers or other equipment Front and rear lids remove completely. 1x Dish handle is fitted in the front lid 4x rubber feet bolted to base. Panels - 6.5mm Black phenolic resin coated birch plywood External 540mm (L) x 390mm (W) x 220mm (H). your welcome to try fit your equipment before you buy COLLECTION ONLY from Rothwell, Leeds 26 Ad ID: Delivery Service Consumer Credit

ABS Case Transport rack 4u in Plymouth

ABS Case Transport rack 4u ideal for musicians and mobile disco Standard 19" racks made of polyethylene featuring 2 doors and handle for an easy access and transport. 2 columns inside for a safety use. Aluminium frames.6 HU rack.

DJ - DISCO- BAND - SINGER 19" sloped Rack Mount Laptop Mixer Swan Flight Case (Hex)

Black Hex/Aluminium flight case designed for rack mounted equipment and laptop setup. Made in the UK by swan (534mm) x 19" sloped rack with 2U x 19" steeper at the rear Maximum mixer height 98mm at the front and 180mm at the rear Complete with a foam covered steel sliding shelf which locks out in the open position for your laptop allowing full access to the mixer 1 x Butterfly catch with loops to fit padlock (padlock not supplied) 2x lift-off hinges at the rear so that the lid removes completely 1x Surface mounted handle fitted on the side 4x Large rubber feet bolted to base Ball corners External 550mm(L) x 520mm(W) x 250mm(H) Approx weight 15Kg used but in good working condition the laptop tray can be removed if you wanted to use for something else if you can see this add it is still for sale priced to sell no offers please Ad ID: Delivery Service Consumer Credit

Flight Case for Laptop, with drawer, 4U rack

Very good condition. Possibility to rack 4 units. The drawer is 6 to 8 units. Flight case only! You can see it in Forest Hill.

4U DJ Equipment Rack Mount Case

4U Equipment Rack Mount DJ / Sound or Lighting Case for Sale £50 priced to sell Collection Guisborough Ad ID: Delivery Service Consumer Credit

4U 19" padded soft-rack carry case

MTR 19" Soft Rack case in a padded 600 Denier nylon bag with front and rear zipped flaps for access and ventilation. Equipment is protected by an inner wooden frame and secured by metal rack strip front and rear. Also fitted with carrying handle, shoulder strap and zipped external accessory compartment (for cables, bodypacks, etc). Features: Sturdy internal wooden frame Rack strip front and rear Securing straps inside flaps Zipped external pocket Rack mounting depth: 350mm Size: 4U Rack height: 4U (176mm) Ad ID: Delivery Service Consumer Credit

PULSE ABS-8UTR 19" 7U FLIGHT CASE TROLLEY

A tough & durable 7U trolley flight case designed to mount 19" rack equipment such as amplifiers, effects units signal processing units, CD players etc. Features removable fronts & backs with butterfly catches for easy access, pull out handle and integrated wheels. ABS and aluminium construction Pull out handle & integrated wheels Integral front and back industry standard 19" rails Rails: 8U total height, 7U usable height (wheels & pull out handle use 1U of internal space) Industrial quality butterfly clips keep lids on longer and operate correctly every time Gasket sealed lids for maximum protection against the ingress of dust, moisture and other unwanted agents Long life, low maintenance, roadproof construction Supplied with rack mounting screws Mounting depth: 415mm (+55mm for each lid depth) buyer collects Read more

Rack mount flight case

Aside from a few scuffs, this is in perfect working order. It has lids on the front and back and rack mounting front and back... For securing the back of heavy amps. It has 4 heavy duty swivel casters and comes with plenty of rack mount screws. A proper, sturdy piece of equipment. Ad ID: Delivery Service Consumer Credit

Flight Rack Mount Equipment Case

Flight Rack Mount Equipment Case with carry handle for DJ / Sound Engineer amps, effects unit, signal processing unit, CD player etc. Removable front & back with butterfly catches for easy access indents to prevent movement when transporting. Reinforced plastic and aluminium material. Light, strong, tough and durable. Buyer to collect. Cash on collection. Width 55cm Height 43cm Depth 56cm Read More

8u Rack mount flight case

Aside from a few scuffs, this is in perfect working order. It has lids on the front and back and rack mounting front and back... For securing the back of heavy amps. It has 4 heavy duty swivel casters and comes with plenty of rack mount screws. 36cm space = 8u Nut placement is completely flexible. A proper, sturdy piece of equipment. Ad ID: Delivery Service Consumer Credit

12u Rack Mount Flight Case

12u Rack mount flight case built by Swan Flight. Used but in good condition. No cracks or splits in any of the panels. Some scuffs from use. Front and rear lids remove completely. 2x Surface handles (1x each side). Ball Corners 4 Large rubber wheels (2 with locks) Centre sleeve 19" rack (W) x 12u 540mm (H) x 460m(D). Lid internal size 40mm. External 540mm (L) x 660mm (W) x 740mm (H) including wheels As shown in the photos one of the corner angle has some rust on the top surface. Don't know why as its the only one it has occurred on. Thanks for looking Read More

RACK MOUNT FLIGHT CASE VGC

RACK MOUNT FLIGHT CASE amplifier NOT included altho it is for sale,either with the flight case or without it. The case is in good condition,but no longer required.

Flight Rack Mount Equipment Case

Flight Rack Mount Equipment Case with carry handle for DJ / Sound Engineer amps, effects unit, signal processing unit, CD player etc. Removable front & back with butterfly catches for easy access indents to prevent movement when transporting. Reinforced plastic and aluminium material. Light, strong, tough and durable. Buyer to collect. Cash on collection. Width 55cm Height 43cm Depth 56cm

10u Rack Mount Flight Case

10u Flight case for 19" rack mount gear. The case is used and so does have a few cosmetic scuffs and marks as expected, but otherwise in good condition. Read More

Flight Rack Mount Equipment Case

Flight Rack Mount Equipment Case with carry handle for DJ / Sound Engineer amps, effects unit, signal processing unit, CD player etc. Removable front & back with butterfly catches for easy access to prevent movement when transporting. Reinforced plastic and aluminium material. Light, strong, tough and durable. Excellent condition. Buyer to collect. Cash on collection. MEASUREMENTS Width 55cm Height 43cm Depth 56cm Read More

19" Rack Mounted Flight Case.

19" Rack Mounted Flight Case on Wheels. Suitable for Mixer and Power Amp and other Rack Mountable items. Very Good Condition. Cost £125 only 3 months ago. Read More

SKB U RACK MOUNT FLIGHT CASE

SKB U Rack Mount Flight Case in very good condition. Comes with mounting brackets/screws. Removable rear panel for cabling access. Perfect for studio use or gigging, this case is incredibly solid and built to last! Cash on collection only. Ad ID: Delivery Service Consumer Credit

SKB U RACK MOUNT FLIGHT CASE

SKB U Rack Mount Flight Case in very good condition. Comes with mounting brackets/screws. Removable rear panel for cabling access. Perfect for studio or gigging, this case is incredibly solid and built to last! Ad ID:

SKB U RACK MOUNT FLIGHT CASE

SKB U Rack Mount Flight Case in very good condition. Comes with mounting brackets/screws. Removable rear panel for cabling access. Perfect for studio use or gigging, this case is incredibly solid and built to last. Cash on collection only. Ad ID: Delivery Service Consumer Credit

Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions

Following kit for sale: Pulse 19in 7U flightcase rack (I don't have the front and back covers, the rack was solely used to house the below setup) - Allen & Heath GR05 5input 4output Analogue Audio Zone Mixer - Numark iDEC Playback and Recodring interface for iPod/phone - 2x 6input switchable power extension (1U) - lockable 2U metal draw - 1U dual RCA in/output Everything tested and perfect working order, in very good condition. The entire unit has only been used for about 3 weeks. Priced to sell @ £300 Can be seen working / tested before purchase. Collection from Perivale UB6 (just off the A40) Sold seperately too, the Zone Mixer can be found among my ads. Numark iDEC Large, easy-to-use transport controls and selection wheel Universal dock for iPod syncs directly with iTunes Recording inputs with clip indication make recording to iPod a breeze Record directly to iPod (5th gen & Classic) and iPod nano (2nd or 3rd gen) Inputs: stereo line (RCA) Outputs: stereo line (RCA), S-Video, Composite video USB audio interface 19" 2RU rack-mountable design Solid steel industrial construction iDEC gives you professional rack integration of your iPod into any live DJ or music rig. With high-performance digital audio and video playback, quality audio recording, and its convenient interface with both the 19-inch rack world and docking to your computer. iDEC’s universal dock for iPod lets you can play audio and video from any docking iPod out through integrated outputs, or instantly capture incoming audio at CD-quality 44.1 kHz sampling rate. Large transport controls enable easy iPod operation even on stage or in dark environments. Bands will find iDEC a great addition to their setups because it enables simple, convenient recording of gigs and rehearsals, and solo performers can use iDEC as a player for backing tracks on iPod. Heath & Allen GR05 The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained system Ad ID: Delivery Service Consumer Credit

Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions

Following kit for sale: Pulse 19in 7U flightcase rack (I don't have the front and back covers, the rack was solely used to house the below setup) - Allen & Heath GR05 5input 4output Analogue Audio Zone Mixer - Numark iDEC Playback and Recodring interface for iPod/phone - 2x 6input switchable power extension (1U) - lockable 2U metal draw - 1U dual RCA in/output Everything tested and perfect working order, in very good condition. The entire unit has only been used for about 3 weeks. Priced to sell @ £450 and I'm not open to offers at all. Can be seen working / tested before purchase. Collection from Perivale UB6 (just off the A40) Sold seperately too, the Zone Mixer can be found among my ads. Numark iDEC Large, easy-to-use transport controls and selection wheel Universal dock for iPod syncs directly with iTunes Recording inputs with clip indication make recording to iPod a breeze Record directly to iPod (5th gen & Classic) and iPod nano (2nd or 3rd gen) Inputs: stereo line (RCA) Outputs: stereo line (RCA), S-Video, Composite video USB audio interface 19" 2RU rack-mountable design Solid steel industrial construction iDEC gives you professional rack integration of your iPod into any live DJ or music rig. With high-performance digital audio and video playback, quality audio recording, and its convenient interface with both the 19-inch rack world and docking to your computer. iDEC’s universal dock for iPod lets you can play audio and video from any docking iPod out through integrated outputs, or instantly capture incoming audio at CD-quality 44.1 kHz sampling rate. Large transport controls enable easy iPod operation even on stage or in dark environments. Bands will find iDEC a great addition to their setups because it enables simple, convenient recording of gigs and rehearsals, and solo performers can use iDEC as a player for backing tracks on iPod. Heath & Allen GR05 The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained system Ad ID:

Pulse ABS 7U flight case rack with Audio Zone Mixer, Numark iDEC, lockable draw and extensions

Following kit for sale: Pulse 19in 7U flightcase rack (I don't have the front and back covers, the rack was solely used to house the below setup) - Allen & Heath GR05 5input 4output Analogue Audio Zone Mixer - Numark iDEC Playback and Recodring interface for iPod/phone - 2x 6input switchable power extension (1U) - lockable 2U metal draw - 1U dual RCA in/output Everything tested and perfect working order, in very good condition. The entire unit has only been used for about 3 weeks. Priced to sell @ £400 Can be seen working / tested before purchase. Collection from Perivale UB6 (just off the A40) Sold seperately too, the Zone Mixer can be found among my ads. Numark iDEC Large, easy-to-use transport controls and selection wheel Universal dock for iPod syncs directly with iTunes Recording inputs with clip indication make recording to iPod a breeze Record directly to iPod (5th gen & Classic) and iPod nano (2nd or 3rd gen) Inputs: stereo line (RCA) Outputs: stereo line (RCA), S-Video, Composite video USB audio interface 19" 2RU rack-mountable design Solid steel industrial construction iDEC gives you professional rack integration of your iPod into any live DJ or music rig. With high-performance digital audio and video playback, quality audio recording, and its convenient interface with both the 19-inch rack world and docking to your computer. iDEC’s universal dock for iPod lets you can play audio and video from any docking iPod out through integrated outputs, or instantly capture incoming audio at CD-quality 44.1 kHz sampling rate. Large transport controls enable easy iPod operation even on stage or in dark environments. Bands will find iDEC a great addition to their setups because it enables simple, convenient recording of gigs and rehearsals, and solo performers can use iDEC as a player for backing tracks on iPod. Heath & Allen GR05 The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained system Ad ID: Delivery Service Consumer Credit

Flight Rack Mount Equipment Case in Birmingham

Flight Rack Mount Equipment Case with carry handle for DJ / Sound Engineer amps, effects unit, signal processing unit, CD player etc. Removable front & back with butterfly catches for easy access to prevent movement when transporting. Reinforced plastic and aluminium material. Light, strong, tough and durable. Buyer to collect. Cash on collection. Width 55cm Height 43cm Depth 56cm

Contact

• Next →