Allen & Heath GR05 1U 5-in 4-out rack mount Analogue Zone Mixer
Allen & Heath GR05 Analogue Zone Mixer (AH-GR05) Features: 2 mic inputs 3 stereo inputs 4 XLR outputs Routing Matrix Remote Controllable Ducking Expandable Lock out system Internal power supply Top condition, perfect working order, used for around 3 weeks. Comes with power lead and printed manual. I'm also going to throw in a 1U double RCA in/output panel (will upload pictures of it) Has been in an 8U rack connected to a Numark iDec Ā£500+ new Priced to sell @ Ā£350 No offers! Collection from Perivale UB6 (just off the A40 and on the Central Line) where it can be seen working and tested before purchase. Manufacturer Description: The GR05 is a compact, five-input, four-output, installation mixer, with a simple front panel and a wide range of installer-configurable options. Each input and output has a level control and three-colour LED status indicator on the front panel. For complete 'fit and forget' installations, the level knobs may be removed and blanking plugs fitted so just the status lights and a mute button remain. All inputs can be routed to any combination of outputs direct or via the VCA control. The unit may be used free-standing, or mounted in 1U of rack space. The direct path is not affected by output level controls and ducking. Selection is done by internal jumper links, VCA control is used for output ducking. Ducking depth and release time can be assigned. Muting is possible. There is an opto-isolated input for external trigger and four additional direct / VCA bus inputs are provided on the expander / remote connector. Alarm interface is possible. There is a status indicator on the front panel. Two balanced microphone/line input channels have XLR connectors and gain controls on the rear panel and internal presets and jumpers to set 15V phantom power, mic/line level, swept EQ, high-pass filter, ducking, and routing. Three stereo RCA (phono) line-level inputs have internal jumpers for level matching, routing and ducking presets. Each output has an XLR connector, separate internal ducking control, two-band EQ and level presets. A female D-sub 25-pin 'Expander/remote' connector allows multiple units to be linked for larger systems, a remote VCA and ducking control, and external DC power supply for maintained systems. Inputs: -22 to -58dBu, ohms, microphone; -28 to +8dBu, ohms, with pad selected for line level; -10dBV or +4dBu, ohms, stereo line. Response: 20Hz-50kHz, +0/-1dB. Distortion: %. Noise: -128dB RMS EIN, 150 ohm source, 22Hz-22kHz, microphone; -91dBu, preamp at 0dB gain, line; better than -86dB mix noise (all channels routed). Output: +20dBu maximum, 22k ohms load, balanced. Power consumption: 18VA maximum. Dimensions: 483 x 260 x (w x d x h) mm. Weight: 4kg. Ad ID: