12 Short Bullet Arrow Points for Cartel Triple Arrows
12 Short Bullet Arrow Points for Cartel Triple Arrows Construction:- stainless steel Why short bullet heads? The short bullet point head (10 mm in length) minimises the potential for the head to bend on the very small diameter shank inside the arrow. This is a common, but not easily seen problem with many current point designs with point head lengths of 20 mm upwards. The problem can be seen by rolling the arrow on a flat surface such as table with the arrow point hanging over the table edge. The arrow point will wobble if it has bent on the shank, and the arrow will no longer fly consistently straight. The shank length inside the arrow is greater to make up the weight lost from the head. This in turn can slightly increase the stiffness of the arrow. This property can be used to add more weight to the point, or use of a weaker thinner spine to minimise side wind drift. Mixed point weight sets also available on request. These points will also fit some Sky Art arrows. Please check sizes with us before ordering. Made in the UK by Arrowsmith Components Please Note - If ordering from more than one of my actions please email for a combined invoice before paying,in order to receive an optimised rate for postage.